Instrukcja obsługi Proaim Flowline Master

Proaim Statief Flowline Master

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Proaim Flowline Master (4 stron) w kategorii Statief. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
What s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Flowline Master Female with Pro Vest
(FLCM FLN MSTR- - -FM)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
A s s e m b l y M a n u a l
Bag Packing
Note: If you have purchased (FLCM FLN MSTR FM),- - - you will get a jacket that ts small, medium, and
large sizes. If you have purchased (FLCM-FLN- - -MSTR FM 01), you will receive a jacket that ts the XL and
XXL sizes. The assembly point will remain the same in both jackets.
2
Join secon 1 of the support bar to -
secon 2 with a simple push t - -
technique.
Flowline Master Female Setup
Overlap both sides of the vest (chest
area) through the provided velcro, then
adjust and buckle them up as per your
requirements.
You can stretch or loosen the adjustment
strap of the jacket, Then adjust unl you
nd it comfortable as shown in the
image.
Overlap both sides of the vest (waist
area) through the provided velcro and
buckle them up as per your
requirements.
Adjust or ghten the vest around the
waist area through the provided strap.
3
Use the strap to adjust the chest Velcro
properly, Then adjust unl you nd it
comfortable and you can set the side
support adjustment rods according to
your body type.
Note: The side support adjustable vest
rods on the sides enable a comfortable t
for all body types.
For proper ng from the shoulder, pull
the strap down from the backside, as
shown in the image.
Loosen the knob of the camera hook and
aach the camera to it. Tighten the knob
to ensure a slip free connecon. -
Aach the vest safety hook to your
camera, as shown in the images, for
more safety & protecon.
Rotate the tension adjustment knob
an clockwise to adjust the tension -
according to the weight of your setup.
Note: You can change the spring tension
to balance the load placed on the suspen-
sion rope by turning the knob on the back
of the jacket.
CAUTION: Do not release the lever
without removing the setup. It may result
in severe damage to the camera.

Specyfikacje produktu

Marka: Proaim
Kategoria: Statief
Model: Flowline Master

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Proaim Flowline Master, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą