Instrukcja obsługi Proaim DL-CMPS-01


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Proaim DL-CMPS-01 (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
What s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
A s s e m b l y M a n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Top Plate
Dolly Base Leg
Rods
Compass 360° Photo Booth Rotang Camera
Plaorm (DL- - CMPS 01)
4 (Size: 6x10mm Allen Buon)
5 (Size: 6x15mm Pan Phillips)
4mm Allen key
Ball Head
2
Compass 360° Camera Plaorm Setup
Same as above, insert the second rod into the
other side of 360° rod adapter of dolly base
leg.
Then properly insert all the Pan Phillips bolts
into the top plate and ghten them with the
help of a screwdriver.
Tighten all the allen bolts properly with the
help of the Allen key.
Insert the allen bolts to secure both the rods
with the dolly base leg.
Insert the rod in 360° rod adapter of the Dolly
Base Leg.
Place the top plate on 360° rod adapter, as
shown in the image.
3
By placing the 2nd plate above the top plate,
insert the bolt and secure the plate properly.
Both the plates are properly aached with
the dolly base leg.
Adjustable angle rod can rotate up to an
angle of 60° .
Insert the adjustable angle rod into the rod.
Secure them properly with the help of the
Allen key and ghten the adjustable angle rod
knob properly.
Remove all bolts of top plate properly with
the help of Allen key.


Specyfikacje produktu

Marka: Proaim
Kategoria: Niesklasyfikowane
Model: DL-CMPS-01

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Proaim DL-CMPS-01, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Proaim

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025