Instrukcja obsługi Prem-i-air EH1626


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Prem-i-air EH1626 (8 stron) w kategorii Wentylator. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
1
2835 Ver. 1 - 04/14
EH1624(EU)/EH1626(EU)/EH1628(EU)
8”(20 cm) 12” (30 cm) 16” (40 cm)
Air Circulator/Brasseur d'Air
3 Vitesses, Inclinable/3 speed, Adjustable
User Manual/Notice d'Utilisation
EH1624
EH1626
EH1628
2
2835 Ver. 1 - 04/14
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the product
for future reference.
OPERATION
Plug the mains lead into a 13 Amp mains socket. If any other appliances are
connected to the same extension lead, make sure that it is rated for the total
power of all appliances connected.
If connecting via an extension lead, make sure that the lead is rated at 3
Amps or more, and that it is fully unwound.
Switch the appliance on at the mains socket.
Use the rotary switch to the speed required:
o O = OFF
o 1 = low speed
o 2 = medium speed
o 3 = high speed
It is normal for the motor to become warm in normal use.
Unplug the appliance from the mains when not in use.
OPERATING COSTS
At time of going to press, the average cost of electricity is £0.15 per unit (kilowatt-
hour). The amount you are being charged will be shown on your electricity bill. At
this cost, the EH1624/EH1626/EH1628 will cost 9.3/12.6/11.5p per day to run on
the "low speed" setting, or 12.9/17.2/18.7p per day to run on the "high speed"
setting.
PAT TESTING
When used in an office environment, we recommend that this product should be
safety-tested yearly by a qualified electrician (PAT Tested).
We recommend that it is PAT tested regularly when used in a domestic
environment.
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified electrician at least
once every 10 years or at every change of occupancy.
For office and retail premises, and buildings such as village halls, the wiring must
be inspected at least once every 5 years.
It is recommended that all building be fitted with smoke alarms (it is mandatory
for new buildings).
DISPOSAL AND RECYCLING
You must not dispose of this appliance with domestic household waste.
Most local authorities have specific collection system for appliances and disposal
is free of charge to the end-user.
When replacing an existing appliance with a similar new appliance your retailer
may take the old appliance for disposal.
3
2835 Ver. 1 - 04/14
PRODUCT SAFETY
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without
supervision.
Do not use in close proximity to gas appliances
Do not use unless correctly installed.
Do not cover when in use.
Do not place the mains lead beneath a carpet or rug.
Do not use the appliance in locations where paint, petrol or other flammable
liquids are used or stored.
Do no insert any object into the appliance through the grilles. This may
damage the appliance or result in overheating or electric shock.
Do not use this appliance in the immediate surroundings of a bath, a shower
or a swimming pool.
The appliance is fitted with an overload cut-out which will operate if the motor
overheats or is stalled. If this happens, disconnect from the mains supply
immediately, and allow the motor to cool down.
MAINTENANCE
Before cleaning, turn the appliance off, and disconnect from the mains supply.
The appliance may then be cleaned using a damp cloth with a drop of washing-
up liquid to remove any dust or dirt from the case. Do no use stronger detergents
or solvents as these may damage the paint finish.
Using a dry 1" (25mm) paint-brush, remove any dust from the grilles.
If the mains lead is damaged, it must be replaced by the manufacturer or and
authorised service centre.
If the mains plug needs to be replaced, proceed as
follows:
Connect the brown wire to the terminal labelled "L".
Connect the blue wire to the terminal labelled "N".
Make sure that the cord-grip is positioned correctly
(over the outer sheath of the cable) and it fully
tightened.
If the plug is fitted with a 13 A or 5 A fuse, replace it
by a 3 A fuse.


Specyfikacje produktu

Marka: Prem-i-air
Kategoria: Wentylator
Model: EH1626

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Prem-i-air EH1626, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Wentylator Prem-i-air

Prem-i-air

Prem-i-air EH1628 Instrukcja

22 Września 2024
Prem-i-air

Prem-i-air EH1624 Instrukcja

20 Września 2024
Prem-i-air

Prem-i-air EH0522 Instrukcja

17 Września 2024
Prem-i-air

Prem-i-air EH1626 Instrukcja

17 Września 2024
Prem-i-air

Prem-i-air EH1509 Instrukcja

16 Września 2024

Instrukcje Wentylator

Najnowsze instrukcje dla Wentylator

Air King

Air King E130SH Instrukcja

10 Października 2024
TriStar

TriStar VE-5936 Instrukcja

10 Października 2024
Orbegozo

Orbegozo PW 1321 Instrukcja

10 Października 2024
Thermex

Thermex Silent 100 CZ Instrukcja

9 Października 2024
Imarflex

Imarflex IF-375BU Instrukcja

9 Października 2024
Imarflex

Imarflex IF-365BK Instrukcja

9 Października 2024
Kogan

Kogan KARCDCFANLA Instrukcja

9 Października 2024
Westinghouse

Westinghouse 72206 Instrukcja

9 Października 2024
Westinghouse

Westinghouse 78425 Instrukcja

9 Października 2024