Instrukcja obsługi Prem-i-air EH1210

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Prem-i-air EH1210 (8 stron) w kategorii Nawilżacz. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
Page 1
EH1210
Peltier Dehumidifier
Déshumidificateur Peltier
Page 2
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the product
for future reference.
BEFORE USE
You must inspect the product including its cable and plug for any signs of
damage. If the product is damaged, DO NOT use it, and contact your supplier
immediately.
INSTALLATION
Place the EH1210 on a rm, flat level surface. Ensure that the air vents on the
sides and top cannot be covered.
Place the unit where the temperature will not fall below 5°C (41°F) (The internal
cooling element becomes covered with ice if the room temperature falls below
that 5°C, which reduces performance).
Place the unit away from any source of heat.
The dehumidifier works best in an enclosed area: closing doors and windows will
improve the efficiency of the dehumidification process.
Connect the power supply to the socket at the the base of the rear of the unit.
Connect the power supply to the mains supply.
Do not use outdoors.
If connecting via an extension lead, make sure that the lead is rated at 3 Amps
or more, and that it is fully unwound.
STORAGE
If the EH1210 is not going to be used for a long time:
1. Empty and clean the bucket.
2. Unplug from the mains
3. Clean the unit
4. Store in its original packaging.
PRODUCT SAFETY
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without
supervision.
Place the EH1210 on a firm flat stable surface.
Make sure that air intakes and exhausts are not obstructed.
For indoor use only.
Page 3
Do not place this appliance within 200 mm (8") of curtains or similar items.
Ensure that the appliance stands upright at all times.
Do not use this appliance in the immediate surroundings of a bath, shower or
swimming pool.
Do not place the mains lead beneath a carpet or rug.
Do not use this appliance in locations where paint, petrol or other flammable
liquids are used or stored.
Do not insert any object into this appliance through the grilles. This may
damage the heater or result in overheating or electric shock.
Do not leave the product unattended for long periods of time.
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified electrician at least
once every 10 years or at every change of occupancy.
For office and retail premises, and buildings such as village halls, the wiring must
be inspected at least once every 5 years.
It is recommended that all building be fitted with smoke alarms (it is mandatory
for new buildings).
OPERATION
Plug the mains lead from the power supply into a 13 Amp mains socket.
Plug the other lead from the power supply into the socket on the rear panel
of the appliance.
If connecting via an extension lead, make sure that the lead is rated at 3
Amps, and that it is fully unwound.
Place the appliance on a firm flat level surface.
Switch on at the mains socket.
Press the on/off switch (on the main unit) to start the unit.
If the yellow "FULL" indicator lights, empty the bucket.
Unplug the unit from the mains when not in use.
Check the unit regularly for damage and cease using it immediately if any
damage to the product, the cable or the mains plug is found.
PAT TESTING.
When used in a workplace, this product must be safety-tested yearly by a
qualified electrician (PAT Tested) in order to comply with the Electricity at Work
Regulations.
We recommend that it is PAT tested regularly when used in a domestic
environment.
OPERATING COSTS
At time of going to press, the average cost of electricity is £0.12 per unit (kilowatt-
hour). The amount you are being charged will be shown on your electricity bill.
At this cost, the EH1210 will cost £0.11 per day to run.

Specyfikacje produktu

Marka: Prem-i-air
Kategoria: Nawilżacz
Model: EH1210

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Prem-i-air EH1210, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nawilżacz Prem-i-air

Prem-i-air

Prem-i-air EH1210 Instrukcja

21 Września 2024
Prem-i-air

Prem-i-air EH1572 Instrukcja

21 Września 2024
Prem-i-air

Prem-i-air EH1219 Instrukcja

21 Września 2024

Instrukcje Nawilżacz

Najnowsze instrukcje dla Nawilżacz

Scarlett

Scarlett SC-985 Instrukcja

15 Października 2024
Clean Air Optima

Clean Air Optima CA-703 Instrukcja

15 Października 2024
Master

Master DHA 250 Instrukcja

10 Października 2024
Philips

Philips HU1509 Instrukcja

9 Października 2024
Philips

Philips HU5710 Instrukcja

9 Października 2024
Panduit

Panduit ACF10 Instrukcja

9 Października 2024
Panduit

Panduit ACF11 Instrukcja

9 Października 2024
Scarlett

Scarlett SC-AH986M30 Instrukcja

9 Października 2024
Sencor

Sencor SHF 7647WH Instrukcja

8 Października 2024
Prixton

Prixton Essence Instrukcja

8 Października 2024