Instrukcja obsługi Praktica ATDCMSS


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Praktica ATDCMSS (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
Digiscoping Camera Mount
Attach your camera to your spotting scope in a matter of seconds and take photographs at long range.
All you need is a digital camera, a spotting scope with an an eyepiece diameter 28-42mm and the
PRAKTICA Digiscoping Camera Mount.
Set up is easy, just follow these simple steps!
1. Setup your spotting scope on a tripod.
2. Insert the spotting scope eyepiece into the digiscoping mount and tighten Wheel A until the mount is secure.
3. Focus the spotting scope.
4. Attach screw B on the digiscoping mount to the bottom of your camera using Wheel C.
5. Move the camera to the furthest position away from the scope and turn on the camera so that the lens is fully extended.
6. Move the camera towards the spotting scope lens and adjust the position of the camera platform using Wheel D and E.
The camera lens needs to be perfectly aligned and as close as possible to the spotting scope without the lenses touching.
You should be able to see a small image on the LCD screen or camera viewfinder with vignette on surrounding areas.
7. When your camera is in the correct position tighten Wheel F and G.
8. To reduce the vignette, zoom in onto the subject via the camera and refocus the spotting scope. Allow the camera a
moment to adjust and begin taking photographs.
Digiscoping Camera Adapter
Wheel A
Wheel F
Wheel C
Wheel G
Wheel D
Screw B
Wheel E


Specyfikacje produktu

Marka: Praktica
Kategoria: Niesklasyfikowane
Model: ATDCMSS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Praktica ATDCMSS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Praktica

Praktica

Praktica ATDCMSS Instrukcja

21 Września 2024
Praktica

Praktica ATCAT2SS Instrukcja

20 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025