Instrukcja obsługi PowerPlus POWX1155

PowerPlus maszyna wiertnicza POWX1155

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PowerPlus POWX1155 (9 stron) w kategorii maszyna wiertnicza. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/9

POWX1155 EN

1 APPLICATION .................................................................................. 2

2 DESCRIPTION(FIG.1) ...................................................................... 2

3 PACKAGE CONTENT LIST ............................................................. 2

4 SYMBOLS ........................................................................................ 3

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3

5.1 Work area ................................................................................................................ 3

5.2 Electrical safety ....................................................................................................... 3

5.3 Personal safety 3 .......................................................................................................

5.4 Power tool use and care ......................................................................................... 4

5.5 Service ..................................................................................................................... 4

6 ADDITIONAL SAFETY INSTRUCTIONS FOR HAMMER DRILLS 4

7 BEFORE USING THE TOOL FOR THE FIRST TIME ..................... 5

7.1 Fitting and changing tools (Fig. 2) ......................................................................... 5

7.2 Removing SDS-plus tool ........................................................................................ 5

8 OPERATION ..................................................................................... 6

8.1 Switching ON/OFF ................................................................................................... 6

8.2 Handle attachment (Fig. 3) ...................................................................................... 6

8.3 Depth stop (Fig. 4)................................................................................................... 6

8.4 Dust collection device (Fig. 5) ................................................................................ 6

8.5 Hammer / drill switch .............................................................................................. 6

9 CLEANING AND MAINTENANCE ................................................... 7

9.1 Cleaning 7 ...................................................................................................................

9.2 Replacing Coal Brushes ......................................................................................... 7

10 TECHNICAL DATA .......................................................................... 7

11 NOISE ............................................................................................... 7

12 SERVICE DEPARTMENT ................................................................ 8

13 STORAGE ........................................................................................ 8

14 WARRANTY ..................................................................................... 8

15 ENVIRONMENT ............................................................................... 9

16 DECLARATION OF CONFORMITY ................................................ 9

POWX1155 EN

ELECTRIC HAMMER DRILL W 1600

POWX1155

1 APPLICATION

The machine is intended for hammer drilling in concrete, brick and stone, as well as for light

chiseling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic.

It is not designed for commercial use.

Warning! Read this manual and general safety instructions carefully before

using the appliance, for your own safety. Your power tool should only be

passed on together with these instructions.

2 DESCRIPTION(FIG.1)

1. Dust cap

2. Fastening sleeve

3. Auxiliary handle

4. Oil cover

5. Hammer stop

6. Drill stop

7. Double AVS system (Anti Vibration

System)

8. On/oﬀ swit ch

9. Depth stop

10. Lock knob for depth stop

11. Handle

3 PACKAGE CONTENT LIST

 Remove all packing materials

 Remove remaining packaging and transit supports (if existing)

 Check the completeness of the packing content

 Check the appliance, the power cord, the power plug and all accessories for transportation

damages.

 Keep the packaging materials as far as possible till the end of the warranty period.

Dispose it into your local waste disposal system afterwards.

WARNING Packing materials are no toys! Children must not play with

plastic bags! Danger of suﬀocation!

 Hammer drill 1600W

 Depth stop

 Auxiliary handle

 Keyless chuck WITH lock function + adaptor

 Dust cap

 Set of spare cole brushes

- SDS drills -10 & 12 x 150mm 3 Ø8

- SDS point chisel: 250mm

- SDS ﬂat chisel: 22 x 250mm

When parts are missing or damaged, please contact your dealer.

POWX1155 EN

4 SYMBOLS

In this manual and/or on the machine the following symbols are used:

Read manual before use

In accordance with essential

requirements of the European

directive(s)

Class I - The machine is I

double insulated; Earthing wire

is therefore not necessary.

Always wear safety goggles

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings and instructions

may result in electric shock, ﬁre and/or serious injury. Save all warnings and instructions for

future reference. The term "power tool" in the warnings refers to your mains operated (corded)

power tool or battery operated (cordless) power tool.

5.1 Work area

 Keep work area clean and well lit. Cluttered and dark areas invite accidents.

 Do not operate power tools in explosive atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power tools create sparks which may ignite the dust or

fumes.

 Keep children and bystanders away while operating a power tool. Distractions can cause

you to lose control.

5.2 Electrical safety

Always check that the power supply corresponds to the voltage on the

rating plate.

 Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools. Unmodiﬁed plugs and matching

outlets will reduce risk of electric shock.

 Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is earthed or

grounded.

 Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

 When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

 If operating a power tool in a damp location is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces the risk of electric shock.

5.3 Personal safety

 Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the inﬂuence of drugs, alcohol or

medication. A moment of inattention while operating power tools may result in serious

personal injury.

 Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection used whenever conditions require

will reduce personal injuries.

Specyfikacje produktu

Marka:	PowerPlus
Kategoria:	maszyna wiertnicza
Model:	POWX1155
Kolor produktu:	Black, Silver, Yellow
Źródło zasilania:	Prąd przemienny
Długość przewodu:	3 m
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	220-240 V
Waga produktu:	- g
Szerokość opakowania:	432 mm
Wysokość opakowania:	126 mm
Głębokość opakowania:	342 mm
Poziom ciśnienia akustycznego:	97 dB
Waga wraz z opakowaniem:	8840 g
Moc pobierana:	1600 W
Wskaźnik nacisku:	3900 bpm
Średnica wiertła w betonie (max):	32 mm
Prędkość znamionowa:	800 RPM
Rodzaj zacisku:	SDS Plus
Średnica wiertła w metalu (max):	13 mm
Średnica wiertła w drewnie (max):	40 mm
Poziom mocy dźwięku:	108 dB
Szybkozaciskowy uchwyt wiertarski:	Tak