Instrukcja obsługi POWERNAIL 54P
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla POWERNAIL 54P (12 stron) w kategorii Zszywacz. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
Powernail 54P Pneumatic PowerTacker™
POWERNAIL
®
CO.
REV 09.14.17
WARNING
OPERATION AND MAINTENANCE MANUAL
MANUAL DE OPERACION Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
Read this manual before you use this pneumatic Powerstapler®. Follow all safety
warnings and instructions. If you are uncertain about the operation of the nailer, call us
directly at 1-800-323-1653 for assistance or contact the closest Powernail Dealer for
help. Please retain this information for future reference.
2
The Powernail trigger-pull Carpet Tacker is designed to bring Powernail quality and fl ooring
expertise to an electric stapler. The Powernail carpet tacker is designed for use with 9/16”
staples.
The Powernail PowerTacker™ is designed to be used for installation of carpet and carpet
padding.
INTRODUCTION
INDEX
LIMITED WARRANTY
POWERNAIL® Company, Inc. warrants to its customer, and to the fi rst end-use purchaser of
POWERNAIL trigger-pull PowerTacker™ purchased from an authorized POWERNAIL distributor,
that each serialized manufactured trigger-pull PowerTacker™ by POWERNAIL®, for a period of 12
months from the date of purchase, and with respect to the PowerTacker™ power cord for a period
of 100 days; shall be free of defects in materials and workmanship and will meet POWERNAIL’S
specifi cations in eff ect at the time of product shipment. POWERNAIL will repair or replace, at its
option, any Powernail PowerTacker™ that s warranty. Claims does not conform to thi must be made
no later than fi fteen (15) days after the end of the warranty period. POWERNAIL will perform all
repair or replacements itself or through its authorized contractors. POWERNAIL is not responsible
for shipping, labor or other direct or indirect costs. Damage caused by abuse, misuse, unusual or
excessive wear is excluded. Repair or modifi cation of the Products by unauthorized parties will void
this warranty. The customer is responsible for returning Products to POWERNAIL for verifi cation
of nonconformance. Warranties for Products not manufactured by POWERNAIL are limited to
warranties provided to POWERNAIL by the manufacturer of such product that are assignable to
customer.
THESE WARRANTIES AND REMEDIES ARE EXCLUSIVE OF ALL OTHERS, EXPRESS
OR IMPLIED. THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PURPOSE
ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL POWERNAIL’S LIABILITY
FOR A WARRANTY CLAIM EXCEED THE PRICE PAID TO POWERNAIL FOR THE
NONCONFORMING PRODUCT, REGARDLESS OF THE FORM OR BASIS OF THE CLAIM
OR CAUSE OF ACTION.
Index..................................... 2
Warranty............................... 2
Safety............................. 3
Operation............................. 4-5
Loading Staples........................ 6
Clearing a jam...................... 7
Safety Labels......................... 7
Maintenance......................... 7
Technical Specifi cations........ 8
Troubleshooting Chart.......... 9
Schematic / Parts List.......... 10-11
Phone Support..................... 12
Web Site.............................. 12
Powernail Company Info..... 12
SAFETY INSTRUCTIONS
3
When operating this stapler, the operator and others in the work area should
ALWAYS wear approved SAFETY GLASSES, with front and side eye protection
(i.e. OSHA required iZ87i safety glasses). Eye protection will help guard against
fl ying staples and debris, which could cause severe eye injury.
EAR PROTECTION should be used to prevent hearing damage when there are high
noise levels in the work area. ALWAYS use ear plugs with a noise reduction rated
at 29 db or higher at a construction site.
Never place any part of the body in the discharge path of the carpet tacker when air
is connected to the stapler. Never point the tool at yourself or others, even if the tool
is not loaded. Never leave the carpet tacker unattended while it is plugged in to an
air source. For safety, keep tools locked up and out of reach of children.
To prevent accidental misfi re, always DISCONNECT THE AIR SUPPLY before
making any adjustments, repairing, clearing jams or when the stapler is not in use.
Do not use on scaff olding or ladders and disconnect stapler from air supply when
transporting
between installation areas.
Never attach the female end of a quick disconnect to the stapler. This will trap
air inside the stapler and permit it to be discharged. Only the unrestricted male
connection should be attached to the stapler.
Stapler requires an air source that can continuously deliver 70 to 120 psi at 3-1/2
cubic feet of air per minute for operation.
Normal air pressure should not exceed 120 psi or damage to the stapler and seals
may occur. Excess air pressure can cause the stapler to explode.
To prevent fi re or explosion, use only regulated compressed air—do not use
bottled gases of any kind (no oxygen or combustible gasses) to power this stapler.
Use only Powernail replacement parts in the repair or maintenance of this carpet
tacker. Parts or repair services are available from the manufacturer or from agents
authorized by the manufacturer. Repairs should be carried out only by trained service
personel in the fi eld of fastener driving tools who will observe proper safety controls
while performing maintenance. Service personel should be qualifi ed to assess the
safe working condition of fastener driving tools.
When not in use, the tool should be cleaned, fully assembled and then stored in a
dry location. This will extend the life of the tool and reduce any oxidation. Keep work
area clean. Cluttered work areas invite injuries. Dress properly. Be sure not to wear
clothing or jewelry that may get caught in moving parts. Rubber gloves and non-skid
footwear are recommended when working outdoors. Wear protective hair covering
to contain long hair.
Keep work area well lit. Keep children away and visitors away from work area. Do
not let visitors contact tool. Do not operate tool when you are tired. Always stay
alert and watch what you are doing.
Specyfikacje produktu
| Marka: | POWERNAIL |
| Kategoria: | Zszywacz |
| Model: | 54P |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z POWERNAIL 54P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Zszywacz POWERNAIL
9 Września 2024
Instrukcje Zszywacz
- Zszywacz Fellowes
- Zszywacz President
- Zszywacz Milwaukee
- Zszywacz Bosch
- Zszywacz Parkside
- Zszywacz Whirlpool
- Zszywacz DeWalt
- Zszywacz Einhell
- Zszywacz Silverline
- Zszywacz Makita
- Zszywacz Rapid
- Zszywacz RYOBI
- Zszywacz DEDRA
- Zszywacz CTA Digital
- Zszywacz Rexel
- Zszywacz Hitachi
- Zszywacz Rapoo
- Zszywacz Craftsman
- Zszywacz Klein Tools
- Zszywacz Fieldmann
- Zszywacz PowerPlus
- Zszywacz Sencor
- Zszywacz HiKOKI
- Zszywacz Workzone
- Zszywacz Porter-Cable
- Zszywacz Metabo
- Zszywacz Proline
- Zszywacz Targus
- Zszywacz Sun Joe
- Zszywacz Kensington
- Zszywacz Aqua Joe
- Zszywacz Iluv
- Zszywacz Holzmann
- Zszywacz Surtek
- Zszywacz Werckmann
- Zszywacz Neo
- Zszywacz Syscom
- Zszywacz MSW
- Zszywacz Mannesmann
- Zszywacz Smart365
Najnowsze instrukcje dla Zszywacz
15 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
6 Października 2024
6 Października 2024
4 Października 2024