Instrukcja obsługi Power Dynamics PDM-T1204

Power Dynamics mikser PDM-T1204

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Power Dynamics PDM-T1204 (20 stron) w kategorii mikser. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

PDM-T Series Stage Mixer

Ref. nr.: 172. ; 172. ; 172.664; 172.666 660 662

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.0

ENGLISH

Congratulations to the purchase of thi Power Dynamics product. Please read this manual thoroughly prior to using the unit in s

order to benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer.

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on.

- Never use the unit in humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of e safety th

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been

received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from

shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be

returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to

drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might

damage your device. Leave the device switched o until it has reached room temperature.

POWERSUPPLY

The label on the back/under side the product indicates the mains voltage to which it must be connected. Check that the mains of

voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must

also be connected directly to the m ns voltage and no dimmer or adjustable power supply may be used. ai

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate

electrical ground to avoid the risk of electrocution or re.

CONTROL ELEMENTS

1. XLR MICROPHONE/LINE INPUT

Mono inp . Use this input to connect a microphone, musical instrument or audio device (CD-player for ut

example) to the device. The socket is supporting both XLR and unbalanced 6.3mm plugs.

2. GAIN

Determines the basic volume of each channel. Adjust them for the desired volume performance. When

the volume level gets too high, the peak LED indicator light will ashing. be

3. HIGH (TREBLE) CONTROLLER

Turn to adjust the high tones with 15dB at 12KHz.

4. MID CONTROLLER

Turn to adjust the mid tones with dB at 2.5KHz. 15

5. LOW (BASS) CONTROLLER

Turn to adjust the low tones with 15dB at 80Hz.

6. AUX CONTROL

Turn to adjust the output level of AUX signal.

7. FX

Turn to adjust the level sent to the internal FX.

8. PEAK LED INDICATOR

When the volume of input signal is too high, the LED indicator light will ashing. In that case, rotate be

the gain controller counter clockwise to turn down the volume.

9. PAN

This is the panorama control or balance control, determin g the position of t signal within the “ ” in he

stereo image. When working in subgroups, you can use the controller to assign the signal to just pan

one output, which gives you additional exibility in recording situations.

10. MUTE

T mute switch breaks the signal path pre-channel fader, us muting that channel in the main mix. he th

The AUX sends which are set to post-fader are muted for that channel too, while the pre-fader monitor

paths remain active irrespective of whether the channel is muted or not.

11. PFL

Press to enable PRE FADER LISTENING. This enables you to listen to a channel signal, without

aecting the main output signal.

12. L/R

Press to send corresponding channel to the main output.

13. G1/G2

Press t route signal to the G1/G2 fader. o

14. CHANNEL FADER

Slide to adjust the (volume) level of the channel signal. Use these faders to adjust the balance between the various

channels.

15. STEREO INPUT

Inputs for connecting to line-level devices (e.g. electric keyboard) via 6.35 plugs. If

only connect to L (MONO) jack, the mixer will send out the same mono signal to L

and R outputs.

16. CD/TAPE INPUT & OUTPUT

RCA connector allowing for connection with playback devices, such as CD s,

players, etc. Use the pe output for connecting with, for example, a tape deck for recording applications. ta

17. AUX/SEND

The AUX/send 6.3mm ck carries the master AUX mix (from the channels AUX controls ja ’).

18. RETURN

Unbalanced 6.3mm jack, typically used to receive the return signal from an external eect device (reverb, delay, etc.).

19. G1/G2

6.3mm jack output for G1/G2 signal.

20. HEADPHONES

6.3mm headphones socket.

Specyfikacje produktu

Marka:	Power Dynamics
Kategoria:	mikser
Model:	PDM-T1204
Kolor produktu:	Czarny
Wbudowany wyświetlacz:	Tak
Częstotliwość wejściowa AC:	50-60 Hz
Napięcie wejściowe AC:	100-240 V
Wysokość produktu:	120 mm
Szerokość produktu:	580 mm
Głębokość produktu:	377 mm
Waga produktu:	5950 g
Wtyk słuchawek:	6.3 mm
Liczba kanałów:	12 kan.
Wyjście na słuchawki:	Tak
Pobór mocy:	- W
Wejście XLR:	Tak
Mikrofon:	Tak
Współczynnik zawartości harmonicznych:	0.5 %
Zasięg częstotliwości:	20 - 20000 Hz
Ustawienia korektora:	Tak
Liczba wyrównywaczy pasm:	7
Cyfrowe przetwarzanie dźwięku:	32 bit
Zasilanie Phantom:	48 V