Instrukcja obsługi Power Dynamics PD615A

Power Dynamics głośnik PD615A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Power Dynamics PD615A (16 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

PD612A Active Speaker 12"

PD615A Active Speaker 15''

PD625A Active Speaker 2x15"

Ref. nr.: 178.972; 178.975; 178.978

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.3

ENGLISH

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in

order to benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore, do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instruction s.

- Do not repeatedly switch the xture on and o. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- This unit is with built-in lead- id rechargeable battery. ac

Please recharge the battery every 3 months if you are

not going to use the unit for a long period of time. Or the

battery may be damaged.

- If the battery is damaged, please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

REAR PANEL

1. Balanced combi connector: XLR input /

Jack 6.3mm (1/4”) input.

2. Input sensitivity switch;

Line: normal mode

Mic: the input sensitivity is set to MIC

level, suitable for the direct connection of

a dynamic microphone. Do NOT use this

setting when connected to a mixer

output!

3. Volume control channel 1

4. Balanced XLR Input

5. RCA Line output

6. Volume control channel 2

7. Amplier volume control. Turn it either

clockwise to increase the volume or

counter clockwise to decrease.

8. DSP Mode

a. Flat

b. Contour

c. Voice

d. DJ

9. Balanced parallel XLR output. This output is linked in parallel with the audio input and is useful to connect another

amplier.

10. Power LED

When , the power is on. lit

11. Signal LED

When lit, the signal presence at the audio input.

12. Power Switch

Push to turn ON / o the amplier. Before

switching the amplier on, check all connections

and turn fully counter clockwise the volume control

(7).

13. Fuse 220-240V~ T3.15 AL 250V

14. Power cord input

Before connecting the power cord, check if the mains corresponds to the voltage indicated on the rating plate on the

unit. Connect the power cord only to a mains socket outlet with a protective earthing connection.

Specyfikacje produktu

Marka:	Power Dynamics
Kategoria:	głośnik
Model:	PD615A
Materiał obudowy:	Sklejka
Wysokość produktu:	730 mm
Szerokość produktu:	435 mm
Głębokość produktu:	467 mm
Waga produktu:	26300 g
Ilość na paczkę:	1 szt.
Impedancja:	4 Ω
Moc wyjściowa (RMS):	1000 W
Klasa wzmacniacza:	D
Zasięg częstotliwości:	40 - 20000 Hz
Czułość:	103 dB
Częstotliwość skrzyżowania:	2500 Hz
Wbudowany mikrofon:	Tak
Przystosowane do użytku na zewnątrz:	Nie
Średnica głośnika wysokotonowego:	1.75 "
Średnica głośnika niskotonowego (imperial):	15 "
Wbudowany wzmacniacz:	Tak