Instrukcja obsługi Power Dynamics 172.650

Power Dynamics Konsola miksująca 172.650

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Power Dynamics 172.650 (20 stron) w kategorii Konsola miksująca. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
PDM-X Series Music Mixer
Ref. nr.: 172.650; 172.652
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.0
2
ENGLISH
Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in
order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer.
- To avoid fire and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on.
- Never use the unit in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the fixture on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic field. Keep this unit at least 60cm away from
computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 months if
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specifications battery. And dispose the damaged battery
environment friendly.
- If the unit has fallen, always have it checked by a
qualified technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and
35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has
reached room temperature.
OVERVIEW
1. MICROPHONE/LINE/GUITAR INPUT COMBO JACK
Balanced XLR and 6.3mm (1/4”) combo input jacks for connecting microphone,
musical instrument or audio device.
2. +48V PHANTOM SWITCH
This switch toggles phantom power on and off. When the switch is on the mixer
supplies +48V phantom power to all channels that have XLR input jacks. Turn
this switch on when using one or more phantom-powered condenser
microphones.
3. GUITAR/LINE INPUT SWITCH
The switch is used to shift the connections to different sound sources of the input
channels. Switched up, the input channel can be connected directly with a high
impedance audio device such an electric guitar or a bass. Switched down, it can
be connected to a low-impedance sound device.
4. SIGNAL INPUT CH 2 BAND EQ
This is a high quality, sensitive, 2 segment equalizer that adjusts the overall tone
of the channel. The adjustment wave form of the high and low bass equalizer is
the shape of the broom, which affects the frequency of 12KHz and the sound
below 80Hz.
5. FX
Adjust the effects volume for corresponding channel.
6. PAN
Positions the channel signal between L/R in the stereo mix.
7. VOLUME KNOB/PEAK LED
Adjust the volume of the sound input from the microphone or other source connected to channel. When the peak light
flashes (indicating that the input signal is too high), please turn the volume knob to the left to reduce the volume.
8. DIGITAL EFFECT PROCESSOR
REP Adjust how many times the echo repeats.
DEL Adjust the time interval between each echo.
LEVEL Adjust the volume of the effect processor.
9. MP3 VOLUME
Adjust the audio signal level from the MP3 player.
10. MAIN OUTPUT VOLUME
Turn to adjust the main output volume.
11. HEADPHONES OUTPUT VOLUME
Turn to adjust the headphone output volume.
12. MP3 PLAYER/RECORDER CONTROL PANEL
A. Short press: previous track/choose upwards or left. Press and hold: reduce the volume.
B. Short press: next track/choose downwards or right. Press and hold: increase the volume.
C. Short press to enter the menu.
D. Short press to (re)start or pause playback or to confirm your input.
13. LCD DISPLAY
14. USB PORT
15. VU METER
Shows the signal output level. Adjust the output level to lower the level if peak indicators light up in red.
16. STEREO CHANNEL VOLUME.
Turn to adjust the stereo channels volume.
17. PAN
Turn to adjust the stereo input channel balance.
18. HEADPHONE JACK
6.35mm stereo headphone output.
19. MAIN OUTPUT CONNECTORS
XLR balanced output connections for active speakers, power amplifiers or other audio devices.
20. STEREO LINE INPUT CONNECTORS
6.35mm stereo line input jacks.
21. STEREO INPUT SENSTIVITY
The stereo line input signal sensitivity selection button (+4dB, -10dB).
22. DC POWER SUPPLY INPUT SOCKET
23. POWER ON/OFF

Specyfikacje produktu

Marka: Power Dynamics
Kategoria: Konsola miksująca
Model: 172.650

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Power Dynamics 172.650, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Konsola miksująca Power Dynamics

Power Dynamics

Power Dynamics 172.622 Instrukcja

25 Września 2024
Power Dynamics

Power Dynamics 952.082 Instrukcja

24 Września 2024
Power Dynamics

Power Dynamics 172.650 Instrukcja

23 Września 2024
Power Dynamics

Power Dynamics 952.161 PRM606 Instrukcja

23 Września 2024
Power Dynamics

Power Dynamics 172.626 Instrukcja

23 Września 2024
Power Dynamics

Power Dynamics 172.750 - PDZM700 Instrukcja

23 Września 2024
Power Dynamics

Power Dynamics 172.612 Instrukcja

23 Września 2024
Power Dynamics

Power Dynamics 171.159 PDM-C805A Instrukcja

23 Września 2024
Power Dynamics

Power Dynamics 952.154 Instrukcja

20 Września 2024
Power Dynamics

Power Dynamics 952.156 Instrukcja

18 Września 2024

Instrukcje Konsola miksująca

Najnowsze instrukcje dla Konsola miksująca

Behringer

Behringer XENYX QX2442USB Instrukcja

14 Października 2024
Koenic

Koenic KHB 800 Instrukcja

14 Października 2024
Ibiza Sound

Ibiza Sound MX801 Instrukcja

14 Października 2024
Pyle Pro

Pyle Pro PMXU83BT Instrukcja

12 Października 2024
Vonyx

Vonyx VMA106 Instrukcja

9 Października 2024
Røde

Røde RØDECaster Duo Instrukcja

8 Października 2024
Valcom

Valcom V-9985 Instrukcja

8 Października 2024
Valcom

Valcom V-9983 Instrukcja

8 Października 2024
Valcom

Valcom V-9984 Instrukcja

8 Października 2024
Glemm

Glemm MX 4816 Instrukcja

8 Października 2024