Instrukcja obsługi POSline TPC7020C
POSline
Barcode lezer
TPC7020C
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla POSline TPC7020C (28 stron) w kategorii Barcode lezer . Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/28
TPC7020B
ii
Copyright © 2007. All rights reserved.
No warranty of any kind is made in regard to this material,
including, but not limited to, implied warranties of merchantability
or fitness for a particular purpose. Although every effort is made to
assure accuracy and completeness, we can not be held liable for
any errors contained herein nor incidental or consequential
damages in connection with furnishing, performance or use of this
material.
We shall be under no liability in respect of any defect arising from
fair wear and tear, willful damage, negligence, abnormal working
conditions, failure to follow the instructions and warnings, or
misuse or alteration or repair of the products without written
approval.
No part of this document may be reproduced, transmitted, stored
in a retrieval system, transcribed, or translated into any language
or computer language in any form or by any means electronic,
mechanical, magnetic, optical, chemical, manual or otherwise,
without express written consent and authorization.
We reserve the right to make changes in product design without
reservation and without notification. The material in this guide is
for information only and is subject to change without notice.
All trademarks mentioned herein, registered or otherwise, are the
properties of their various respective owners.
iii
Laser Safety
The portable data terminal complies with safety standard IEC
60825 for a Class I laser product. It also complies with CDRH as
applicable to a Class II laser product. Avoid long term staring into
direct laser light.
Radiant Energy: The advanced portable data terminal uses two
low-power visible laser diodes operating at 650nm in an
opto-mechanical scanner resulting in less than 3.9µW radiated
power as observed through a 7mm aperture and averaged over
10 seconds.
Do not attempt to remove the protective housing of the scanner,
as un-scanned laser light with a peak output up to 0.8mW would
be accessible inside.
Laser Light Viewing: The scan window is the only aperture
through which laser light may be observed from this product. A
failure of the scanner motor, while the laser diode continues to
emit a laser beam, may cause emission levels to exceed those for
safe operation. The scanner has safeguards to prevent this
occurrence. If, however, a stationary laser beam is emitted, the
failing scanner should be disconnected from its power source
immediately.
Adjustments: Do not attempt any adjustments or alteration of this
product. Do not remove the protective housing of the scanner.
There are no user-serviceable parts inside.
Caution: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous laser light exposure.
Optical: The use of optical instruments with this product will
increase the eye hazard. Optical instruments include binoculars,
magnifying glasses, and microscopes but do not include normal
eye glasses worn by the user.
Specyfikacje produktu
| Marka: | POSline |
| Kategoria: | Barcode lezer |
| Model: | TPC7020C |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z POSline TPC7020C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Barcode lezer POSline
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
Instrukcje Barcode lezer
- Barcode lezer Garmin
- Barcode lezer Honeywell
- Barcode lezer Manhattan
- Barcode lezer Zebra
- Barcode lezer IFM
- Barcode lezer Datalogic
- Barcode lezer Intermec
- Barcode lezer Newland
- Barcode lezer Socket Mobile
- Barcode lezer Nilox
- Barcode lezer Steren
- Barcode lezer Palm
- Barcode lezer IC Intracom
- Barcode lezer Adesso
- Barcode lezer Baracoda
- Barcode lezer Posiflex
- Barcode lezer CipherLab
- Barcode lezer Trimble
- Barcode lezer DENSO
Najnowsze instrukcje dla Barcode lezer
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024
16 Września 2024