Instrukcja obsługi Porter-Cable PCB660DP
Porter-Cable
Wiertła kolumnowe
PCB660DP
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Porter-Cable PCB660DP (28 stron) w kategorii Wiertła kolumnowe. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/28
1
15 IN. (381 MM)
DRILL PRESS
PERCEUSE À COLONNE
381 MM (15 PO)
TALADRO DE COLUMNA
381 MM (15 PULG.)
CATALOG NUMBER
PCB660DP
TYPE 2
Instruction Manual
Manuel d’instructions
Manual de instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN,
CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA.
LÉASE ESTE ADVERTENCIA:
INSTRUCTIVO ANTES DE USAR EL
PRODUCTO.
2
2016/05
TABLE OF CONTENTS
SECTION PAGE
PRODUCT SPECIFICATIONS.................................................................................... 2
CALIFORNIA PROPOSITION 65................................................................................ 3
SAFETY GUIDELINES - DEFINITIONS..................................................................... 3
POWER TOOL SAFETY RULES................................................................................. 4
ADDITIONAL SAFETY RULES FOR DRILL PRESSES.............................................. 5
ADDITIONAL SAFETY RULES FOR THE LASER...................................................... 7
ELECTRICAL REQUIREMENTS AND SAFETY.......................................................... 8
TOOLS NEEDED FOR ASSEMBLY............................................................................. 10
CARTON CONTENTS................................................................................................. 10
UNPACKING YOUR DRILL PRESS............................................................................ 11
KNOW YOUR DRILL PRESS...................................................................................... 12
GLOSSARY OF TERMS.............................................................................................. 13
ASSEMBLY AND ADJUSTMENTS.............................................................................. 14
OPERATION................................................................................................................ 20
MAINTENANCE.......................................................................................................... 24
ACCESSORIES AND ATTACHMENTS....................................................................... 24
TROUBLESHOOTING GUIDE.................................................................................... 25
PARTS LIST................................................................................................................. 26
WARRANTY................................................................................................................ 28
To avoid electrical hazards, re hazards or damage to the tool, use proper circuit protection.
Use a separate electrical circuit for your tools.
The Drill Press is wired at the factory for 110-120 Volt operation. It must be connected to a
120 V, 8 AMP branch circuit and use a 8 AMP time delay fuse or circuit breaker. To avoid shock
or re, replace power cord immediately if it is worn, cut or damaged in any way.
PRODUCT SPECIFICATIONS
MOTOR Chuck size........... 5/8 in. (16 mm)
Power source......... 120 V, 60 Hz, 8 A 2-7/8 in. (73 mm)Column size.........
Horsepower............ 1 HP (Max. Developed) TABLE
Speed (RPM)......... 1790 (No load) Size..................... 13-5/16 in. x 13-3/16 in.
(338 mm x 335 mm)
Type....................... Induction BASE
Volts....................... 120 volts AC only Size..................... 20-3/8 in. x 11 in.
(518 mm x 279 mm)
LASER Class IIIa 7-1/2 in. (190 mm)Chuck to column..
Spindle travel......... 4 in. (102 mm) 44-3/8 in. (1127 mm)Chuck to base......
Speeds (RPM)....... 300 ~ 3100 RPM Quill diameter...... 1.85 in. (47 mm)
Printed in China
WARNING
!
3
WARNING ICONS
Your power tool and its Instruction Manual may contain “WARNING ICONS” (a picture symbol
intended to alert you to and/or instruct you how to avoid a potentially hazardous condition).
Understanding and heeding these symbols will help you operate your tool better and safer.
Shown below are some of the symbols you may see.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
Some dust created by power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known to the state of California to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
Lead from lead-based paints,●
Crystalline silica from bricks and cement and other masonry products, and●
Arsenic and chromium from chemically-treated lumber.●
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to lter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling and
other construction activities. Wear protective clothing and wash exposed areas with soap
and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote
absorption of harmful chemicals.
Use of this tool can generate and/or disperse dust, which may cause serious and
permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory
protection appropriate for the dust exposure. Direct particles away from face and body.
SAFETY GUIDELINES - DEFINITIONS
CALIFORNIA PROPOSITION 65
SAFETY ALERT: Precautions that involve your safety.
PROHIBITION
WEAR EYE PROTECTION: Always wear safety goggles or safety glasses with
side shields.
WEAR RESPIRATORY AND HEARING PROTECTION: Always wear respiratory and hearing
protection.
READ AND UNDERSTAND INSTRUCTION MANUAL: To reduce the risk of injury, user and
all bystanders must read and understand instruction manual before using
this product.
KEEP HANDS AWAY FROM THE MOVING PART AND CUTTING SURFACE: Failure to
keep your hands away from the moving part and cutting surface will result in serious personal
injury.
SUPPORT AND CLAMP WORK
WARNING
!
WARNING
!
WARNING
!
CAUTION
DANGER
!
CAUTION
!
Specyfikacje produktu
| Marka: | Porter-Cable |
| Kategoria: | Wiertła kolumnowe |
| Model: | PCB660DP |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Porter-Cable PCB660DP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Wiertła kolumnowe Porter-Cable
2 Lipca 2024
Instrukcje Wiertła kolumnowe
Najnowsze instrukcje dla Wiertła kolumnowe
4 Lipca 2024
4 Lipca 2024
3 Lipca 2024
2 Lipca 2024