Instrukcja obsługi Polti FRESH AIR FA30

Polti oczyszczacz powietrza FRESH AIR FA30

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Polti FRESH AIR FA30 (5 stron) w kategorii oczyszczacz powietrza. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
1Vapour emission hole
2Handle
3Tank
4Water level led
5Ionizer led
6Ions emission hole
7Humidifier led
8Start switch
9Vapour emission intensity control
10 Operation control (see Symbols)
11 Air duct and filter
12 Hook locking tank
1
2
3
4
7
5
8
9
10
12
11
6
ENGLISH
GENERAL
Most of people do not know that in the air we breathe there are positive and negative ions
which must be present in the same amount, in order to define it “clean”. Today, especially
in cities, because of industrialization and pollution, positive ions exceed negative ions (in
proportion of 4 to 1).
Thus needing them to be supplemented at least within the home environment, in order to reach
balance. To get such a result a negative ion generator has been designed and it is mainly com-
posed by a direct current - high voltage power supply with negative pole, joint to a system of
point electrodes surrounded by an anode.
A breath of air coming from a fan, passing through the electric field generated inside, ionized
and transfers into the environment originating a concentration of 1000/1500 negative ions per
cubic cm.
Which can be enough for a volume of 150/200 cubic metres.
IONIZATION POSITIVE EFFECTS:
decrease of home pollution
nervous system relaxation
metabolism increase
it is suggested for children, old people and for people affected by respiratory disorders.
GENERAL INFORMATION ABOUT ULTRASOUND HUMIDIFIER
In order to umidify a room we generally use a heater sinked into water generating vapour in
the environment when boiling.
Such system is easy but there are several disadvantages, such as.
•Vapour fastly condensates and is turned into water by the generator
•“Warm” vapour changes room temperature
Electrical consumption is fairly high
An alternative system must to be found in ultrasound generators using a piezoelectric transdu-
cer.
Putting such a device into water, and having it vibrating at a vert high frequency (up to a maxi-
mum of 2 million oscillations per second), it causes a very thin atomization of water generating
“cold” vapour which will be sprayed into the environment by a fan.
This system has several advantages, such as:
vapour is pushed away and it does not change its state and it mixes with air.
•room temperature does not change
Electrical consumption is low (30 Watt~).
SUGGESTIONS
Water contains minerals, such as: calcium, magnesium etc., they can fall on your furniture or
tv-set and set as a white dust. Wipe it with a cloth. Put distilled water inside the humidifier if the
amount of dust is too big.
Water filter: In areas where there is a high concentration of calcium in the water, the use of
the demineralisating filter is suggested. Not only does it purifiy the water of calcium, but it also
protects the internal mechanisms.
Air filter: It is suggested that air filters be substituted after 1000 hours (2 months) of use.
ENGLISH


Specyfikacje produktu

Marka: Polti
Kategoria: oczyszczacz powietrza
Model: FRESH AIR FA30

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Polti FRESH AIR FA30, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje oczyszczacz powietrza Polti

Instrukcje oczyszczacz powietrza

Najnowsze instrukcje dla oczyszczacz powietrza

Ulsonix

Ulsonix AIRCLEAN 20G Instrukcja

15 Października 2024
Winix

Winix AUS-5500 Instrukcja

14 Października 2024
Gorenje

Gorenje H08WB Instrukcja

9 Października 2024
Ufesa

Ufesa PF4500 Instrukcja

9 Października 2024
Ufesa

Ufesa PF3500 Instrukcja

9 Października 2024
Samsung

Samsung AX32BG3100GB Instrukcja

9 Października 2024
GE

GE AHG50LE Instrukcja

9 Października 2024
Miele

Miele PAC 1200 Instrukcja

9 Października 2024