Instrukcja obsługi Polk T Series

Polk głośnik T Series

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Polk T Series (24 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
T Series
1. 1
T Series Owner’s Manual
T15, T30 and T50
1. 2
Polk Audio History—A Passion for Sound
Polk Audio was founded in Baltimore in 1972 by Johns Hopkins
University graduates, Matthew Polk and George Klopfer. Today,
Polk Audio is a leading manufacturer of high-quality home, car
and multimedia and the largest audio brand of Sound United.
Polk products emphasize superior sound and build quality, and
feature many patented and award-winning innovations. Having
built their reputation as “The Speaker Specialists” for more than
40 years, Polk products are sold throughout the USA, Canada
and in more than 50 countries around the world. Polk Audio’s
mission is simple: Build high-quality, great-sounding speakers at
affordable prices. For the people of Polk Audio, building speakers
is not just a job—it’s a passion.
Important Notice
Please find the serial number located on the back of the product.
It’s a good idea to write this number on the warranty sheet and put
it in a safe place should you need to reference it later.
Prior to Using Equipment
Polk Audio thanks you for your purchase. Make sure to read this
user guide in full before using your speaker system. It will ensure
that you get the most from the product and understand all safety
requirements. Once you’re done reading the user guide, put it in
a safe place for later reference.
To avoid damaging your speaker from input overload, please note
the following:
Don’t supply power to the speaker system that exceeds
its maximum input
Always make sure the amplifier is turned off when your
connecting or disconnecting cables
If you’re using a graphic equalizer to highlight those high
and low frequencies, avoid excessive amplifier volume
• Never leave your speaker playing unattended
Contents
How to Connect Your System .............................................. 3
T Series Speaker Positioning ................................................ 3
Adding Adhesive-Backed Rubber
Feet to the T-Series............................................................... 4
Cleaning Your Polk Speakers................................................. 4
Specifications ....................................................................... 5
T15 Keyhole Template .......................................................... 23
Technical Assistance & Contact ............................................ 24
T Series
1. 3
How to Connect Your System
To get the best sound quality, it’s important to wire your
speakers correctly.
How to Use Binding Post Connectors
Loosen hex nut and insert bare speaker wire through hole.
Tighten hex nut down to make connection.
Note: Do not insert insulated section of wire into hole
(you will not get a connection).
Basic Speaker Hookup
Make sure that the red (+) and black (-) connectors on your
amplifier or receiver connect to the red (+) and black (-)
connectors on your speakers. If your speakers sound “thin,”
with little bass and little or no center image, odds are that one
of the speaker wires is connected backwards. Double check
all connections.
Placement Recommendations for the T30 Center
Channel Speaker
The most popular placement for your T30 center channel speaker
is on a shelf below your flat screen TV (if you have an older box
TV, a popular option is to place your center channel speaker on
top of it, anchoring the dialogue and effects to the screen).
Processor Mode for the T30 Center Channel Speaker
Note: Set Center Channel Speaker to “small” in your receiver’s
Bass Management Settings.
The “bass management” or “speaker configuration” menus of
most surround receivers offer the choice of “normal” or “wide”
modes for center channel operation. In discrete channel digital
processors, these modes are referred to as “small” and “large.”
Normal (small) mode filters bass frequencies from the center
channel speaker and sends them instead to the front left and right
main speakers or to the subwoofer output (LFE) jack. Wide (large)
mode sends an unfiltered, full-range signal to the center channel
speaker. Use the Small (normal) mode for optimum center (and
surround) channel performance and reliability.
T Series Speaker Positioning
To maximize the sound quality of your Speaker system—
whether you’ve purchased T15 Bookshelf Speakers, a T30 center
channel speaker, or T50 tower speakers—correct placement is
everything. Take a look at the following examples and give them
a try based on the T Series speakers you’ve purchased.
Note: Your T Series speakers are compatible with 2.0, 2.1, 3.1,
5.1, 7.1 and 9.1 setups (optional subwoofer shown in graphics).
Power Amplifier


Specyfikacje produktu

Marka: Polk
Kategoria: głośnik
Model: T Series

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Polk T Series, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Polk

Polk

Polk Signature Elite ES50 Instrukcja

10 Października 2024
Polk

Polk S-15 Instrukcja

8 Października 2024
Polk

Polk db6501 Instrukcja

4 Października 2024
Polk

Polk ES90 Instrukcja

28 Września 2024
Polk

Polk TL1600 Instrukcja

27 Września 2024
Polk

Polk Atrium 8SDi Instrukcja

24 Września 2024
Polk

Polk T Series Instrukcja

23 Września 2024
Polk

Polk PA D4000.4 Instrukcja

23 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024