Instrukcja obsługi Polk Reserve R200

Polk głośnik Reserve R200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Polk Reserve R200 (71 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/71
R500, R600 & R700 Floor-standing Loudspeakers
R300, R350 & R400 Center Channel Speakers
R100 & R200 Bookshelf Speakers
Reserve™
R500, R600 & R700 Haut-parleurs sur pied
R300, R350 & R400 Enceintes centrales
R100 & R200 Enceintes d’étagère
OWNER’S MANUAL
2
English
WARNING: Listen Carefully
Polk Audio loudspeakers are capable of playing at extremely
high volume levels, which could cause serious or permanent
hearing damage. Polk Audio, Inc. accepts no liability for
hearing loss, bodily injury, or property damage resulting from
the misuse of its products. Keep these guidelines in mind and
always use good judgment when controlling volume:
• Limit prolonged exposure to volume levels that exceed
85 decibels (dB). For more information about safe volume
levels, take a look at the Occupational Health
and Safety Administration (OSHA) guidelines at
http://www.osha.gov/.
Product Disposal
Certain international, national and/or local laws and/or
regulations may apply regarding the disposal of this product.
For more information, please contact the retailer where you
purchased this product or the Polk importer/distributor in your
country. More information is also available at
www.polkaudio.com.
Expect Great Sound—The Polk Reserve Story
Thank you for purchasing the Polk Reserve Series loudspeakers!
Modern styling combined with Polk’s premium Pinnacle tweeter
and Turbine mid-range driver deliver high-resolution detail
and imaging. With our detailed, deep eortless bass, you will
enjoy a whole new listening experience. Pure and minimalist,
the Polk Reserve Series is engineered and designed with your
entertainment in mind.
Having built our reputation as “The Speaker Specialists” for
more than 45 years, we take pride in our superior sound
and build quality, which features many patented and award-
winning audio innovations. For the people of Polk, building
audio products is not just a job—it’s a passion. And if you’re
going to remember one thing, remember this: We live by the
truest principle of what audio should deliver—great sound at an
aordable price for everyone!
Technical Assistance or Service
Thank you for your Polk® purchase! If you have a question or
comment, please feel free to contact us. Please visit
www.polkaudio.com for support contact information.
Contents
Expect Great Sound — The Polk Reserve Story 2 .............................
Safety Instructions 3 ........................................................................................
What’s in the Box .............................................................................................4
How to Connect Your System ....................................................................4
Caring for Your Reserve Loudspeakers ................................................5
Reserve Series Speaker Positioning .......................................................6
Specifications 11 ....................................................................................................
4
English
Connectors
You have several options when choosing connectors for your
speaker wires, and it’s really a matter of personal preference.
Three of the more commonly used are banana plugs, spade
lugs and bare wire. If you know where you want to locate your
speakers and plan to set up your system and leave them there,
then bare wire will work fine. Just make sure there are not
stray strands of wire that could come into contact. If you like
to experiment with dierent speaker locations, spade lugs or
banana plugs oer more convenient options when it comes to
disconnecting and reconnecting wires.
Basic Floor-Standing, Center, Bookshelf, and Height Module
Speaker Hookup
Make sure that the red (+) and black (-) connectors on your
amplifier or receiver connect to the red (+) and black (-) connectors
on your speakers. If your speakers sound “thin,” with little bass and
little or no center image, odds are that one of the speaker wires is
connected backwards. Double check all connections.
Bi-Wiring (R700 only)
Bi-wiring can provide noticeable improvements in the overall
transparency of your loudspeakers. After removing the jumpers,
run separate speaker wires to the low and high frequency
drivers from a single amplifier (the upper set of binding posts
are for the high frequency drivers, the lower set of binding
posts are for the low frequency drivers). Connect one set of
speaker wires to the upper terminals on each speaker and one
set of wires to the lower terminals. Connect the other ends of
both wire sets to the same amplifier outputs. See amplifier/AV
receiver user manual for configuration instructions (Figure 1).
What’s in the Box
Each box contains:
1. Loudspeaker(s)
2. Owner’s Manual
3. Registration Card
4. Magnetic grilles
(Speaker cable not included)
How to Connect Your System
To get the best sound quality, it’s important to wire your
speakers correctly.
Wire Preparation
Follow the hookup directions included with your receiver/
amplifier. Strip 0.5” (12.7mm) of insulation from each of the
two conductors of the wire to expose the bare metal and twist
each of the individual conductors into single un-frayed strands.
Note that one of the terminals on the rear of each speaker is
marked red (+) and the other is black (–). Make sure that you
connect the wire from the positive (+) terminal of your amplifier
or receiver to the red (+) terminal on your speaker and the wire
from the negative (–) terminal of your amplifier or receiver to
the black (–) terminal on your speaker. Most wire has some
indicator (such as color-coding, ribbing or writing) on one of
the two conductors to help you maintain consistency.
These recommendations are for all connections from the
amplifier/receiver to each speaker:
Binding Posts
To connect wire to the binding post, unscrew the binding post
cap and insert the bare wire into the hole near the base of the
binding post. Do not insert the insulated part of the wire into
the hole as this will not give you a good connection. Tighten the
binding post cap until it seats firmly with the wire, but do not
over tighten.
Runs Minimum Wire Gauge
Lengths up to 25' (5 m) 16
Lengths greater than 25' (5 m)
but less than 50' (15 m)
14
Lengths greater than 50' (15 m)
but less than 75' (25 m)
12
Lengths greater than 75' (25 m) 10
(Figure 1)
RIGHT FRONT

Specyfikacje produktu

Marka: Polk
Kategoria: głośnik
Model: Reserve R200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Polk Reserve R200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Polk

Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Polk

Polk F/X 1000 Instrukcja

12 Stycznia 2025
Polk

Polk Signature Elite ES50 Instrukcja

10 Października 2024
Polk

Polk Signature Elite ES90 Instrukcja

8 Października 2024
Polk

Polk S-15 Instrukcja

8 Października 2024
Polk

Polk db6501 Instrukcja

4 Października 2024
Polk

Polk ES90 Instrukcja

28 Września 2024
Polk

Polk TL1600 Instrukcja

27 Września 2024
Polk

Polk Atrium 8SDi Instrukcja

24 Września 2024
Polk

Polk T Series Instrukcja

23 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch PIC-525-T-SC Instrukcja

15 Stycznia 2025