Instrukcja obsługi Planet MGB-TSX


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Planet MGB-TSX (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
Overview
Thank you for purchasing PLANET MGB family SFP
Mini-GBIC Gigabit Ethernet module. The MGB family
SFP Mini-GBIC Gigabit Ethernet module can install into
PLANET Switch products with SFP Mini-GBIC interface.
The distance can be extended from 100 meters (TP),
550 meters (Multi-mode, LC), up to 120 kilometers
(Single-mode, LC).
Note
Class 1 Laser Product
Complies with FDA Regulation 21 CFR
1040.10 and 1040.11.
Warning
Class 1 radiation is present when the
device or system is powered up.
Warning
Only trained and qualified personnel
should be allowed to install or replace
these modules.
1. Model List
Your MGB family SFP Mini-GBIC Gigabit Ethernet module
comes with one of the following models.
Gigabit Ethernet SFP Module List
Model Interface Connector type and distance
MGB-GT 1000Base-T Module RJ-45, 100m
MGB-SX 1000Base-SX Module LC, MM, 550m
MGB-LX 1000Base-LX Module LC, SM, 10km
MGB-L30 1000Base-LX Module LC, SM, 30km
MGB-L50 1000Base-LX Module LC, SM, 50km
MGB-L70 1000Base-LX Module LC, SM, 70km
MGB-L120 1000Base-LX Module LC, SM, 120km
MGB-LA10 1000Base-LX Module LC WDM (TX:1310nm), SM, 10km
MGB-LB10 1000Base-LX Module LC WDM (TX:1550nm), SM, 10km
MGB-LA20 1000Base-LX Module LC WDM (TX:1310nm), SM, 20km
MGB-LB20 1000Base-LX Module LC WDM (TX:1550nm), SM, 20km
MGB-LA40 1000Base-LX Module LC WDM (TX:1310nm), SM, 40km
MGB-LB40 1000Base-LX Module LC WDM (TX:1550nm), SM, 40km
MGB-TSX 1000Base-SX Module LC, MM, 550m (-40~75°C)
MGB-TLX 1000Base-LX Module LC, SM, 10km (-40~75°C)
MGB-TL30 1000Base-LX Module LC, SM, 30km (-40~75°C)
MGB-TL70 1000Base-LX Module LC, SM, 70km (-40~75°C)
Models with LX or last two numbered characters
indicate the ber-port is with “Single-Mode optic
ber connector and the number indicates the maximum
distance in km.
2. Checklist
Your MGB carton should contain the following items:
The MGB family SFP Mini-GBIC Gigabit Ethernet
Module
This User’s Manual
If any item is missing or damaged, please consult the
dealer from whom you purchased your MGB family SFP
Mini-GBIC Gigabit Ethernet module.
l
l
3. Introduction
3-1 1-Port 1000Base-T SFP Mini-GBIC
Module - MGB-GT
Features:
Comply with IEEE 802.3ab Gigabit Ethernet standard
1 x 1000Base-T port (RJ-45 connector)
Up to 100m over 4-pair UTP Cat.5/5e cable
Plug & Play Installation
0 to 50 Degree C operation temperature
3-2 1-Port 1000Base-SX / LX SFP Mini-GBIC
Modules - MGB-SX / MGB-LX / MGB-L30
/ MGB-L50 / MGB-L70 / MGB-L120
Features:
Comply with the IEEE 802.3z Gigabit Ethernet stan-
dard
1 x 1000Mbps LC ber port
Plug and Play Installation
0 to 50 Degree C operation temperature
Note
The MGB-L30, MGB-L50, MGB-L70 and
MGB-120 SFP transceivers provide the
optical power budget from 19dB to 30dB.
When shorter distance of single-mode fiber
cables is used, you might need to insert
an in-line optical attenuator in the link to
avoid overloading of the transceiver.
SFP Model
In-line
Optical
Attenuator
MGB-
L30
MGB-
L50
MGB-
L70
MGB-
L120
Fiber Cable Length
25Km 2-dB 10-dB 15-dB 25-dB
25Km < Fiber Cable
Length < 50Km -- -- 8-dB 20-dB
3-3 1-Port 1000Base-LX WDM SFP
Mini-GBIC Modules - MGB-LA10 / LB10,
MGB-LA20 / LB20, MGB-LA40 / LB40
Features:
Comply with the IEEE 802.3z Gigabit Ethernet stan-
dard
1 x 1000Mbps LC ber port (single LC ber connec-
tors)
Plug and Play Installation
0 to 50 Degree C operation temperature
Note
1. The fiber connector and distance
support will be different by various
models.
2. The MGB-LAxx / LBxx should runs in
pair. It means you must connect MGB-
LAxx in one end and another MGB-LBxx
in the other end, for example LA10 to
LB10 where only one single mode optic
wire is required.
3. The MGB-LA10, MGB-LB10, MGB-LA20,
MGB-LB20 and MGB-LA40, MGB-LB40
SFP transceivers provide the optical
power budget from 12dB to 20dB.
When shorter distance of single-mode
fiber cables is used, you might need
to insert an in-line optical attenuator
in the link to avoid overloading of the
transceiver.
SFP Model
In-line
Optical
Attenuator
MGB-
LA10
MGB-
LB10
MGB-
LA20
MGB-
LB20
MGB
LA40
MGB-
LB40
Fiber Cable Length
5Km 2-dB 6-dB 14-dB
5Km < Fiber Cable
Length < 30Km 2-dB --- 4-dB
3-4 1-Port 1000Base-SX / LX SFP Mini-GBIC
Modules - MGB-TSX / MGB-TLX /
MGB-TL30 / MGB-TL70
Features:
Comply with the IEEE 802.3z Gigabit Ethernet stan-
dard
1 x 1000Mbps LC ber port
Plug and Play Installation
-40 to 75 Degree C operation temperature
Note
The MGB-TL30 and MGB-TL70 SFP
transceivers provide the optical power
budget of 21dB and 24dB. When shorter
distance of single-mode ber cables is
used, you might need to insert an in-
line optical attenuator in the link to avoid
overloading of the transceiver.
SFP Model
In-line Optical
Attenuator
MGB-
TL30
MGB-
TL70
Fiber Cable Length
25Km 2-dB 15-dB
25Km < Fiber Cable Length
< 50Km -- 8-dB
- 9 -
- 10 -
- 11 -
4 Installing SFP Mini-GBIC Modules
4.1 Install the module
Please follow these steps to install the SFP Mini-GBIC
modules:
1. Power on the Switch and place the Switch on a at
surface. Install the new SFP Mini-GBIC modules
by inserting it into the slots and sliding it in until it
stops (See Figure 1). Press it rmly until you feel
the module snap into place. Never force, twist or
bend the SFP Mini-GBIC modules. The SFP Mini-GBIC
module slides in smoothly and the Switch will auto-
matically detect the new module.
Figure 1: Insert the SFP Mini-GBIC modules
2. After the TP/ber connection was built successfully.
Check the LEDs to verify that if there is a link and a
proper connection at the port.
Please refer to the Switch’s user’s manual for more
about Switch or modules management.
4.2 Remove the module
1. Make sure there is no network
activity by consult or check with the
network administrator. Or through
the management interface of the
switch (if available) to disable the
port in advance.
1
2
2. Remove the UTP cable or the Fiber Optic Cable gently.
3. Turn the handle of the MGB module to horizontal.
4. Pull out the module gently through the handle.
Warning
Never pull out the module without pull the
handle or the push bolts on the module.
Direct pull out the module with violent
could damage the module and the SFP
module slot of the device.


Specyfikacje produktu

Marka: Planet
Kategoria: nieskategoryzowany
Model: MGB-TSX
Typ interfejsu: mini-GBIC
Standardy komunikacyjne: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z
Maksymalna szybkość przesyłania danych: 1000 Mbit/s
Zakres temperatur (eksploatacja): -40 - 75 °C
Kod zharmonizowanego systemu (HS): 85369010
Liczba dołączonych produktów: 1 szt.
Złącze światłowodowe: LC
Maksymalny dystans transferu: 550 m
Długość fali: 850 nm
Typ transceivera SFP: Swiatłowód
Obsługa funkcji Plug & Play: Tak
Standard karty sieciowej SFP: SX
Liczba portów: 1
Wsparcie dla Single-mode fiber (SMF): Nie
Transmisja dwukierunkowa duplex: Full, Half
Obsługa podłączania podczas pracy: Tak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Planet MGB-TSX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Planet

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024