Instrukcja obsługi Pioneer TS-A300B

Pioneer subwoofer TS-A300B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pioneer TS-A300B (2 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

TS-A300B

EASILY UPGRADE TO HIGH PERFORMANCE

12˝ Pre-loaded subwoofer system

• 12” pre-loaded bass-reflex (ported) subwoofer

system

• Passive (non-amplified) design provides system

flexibility

• Glass fiber and mica interlaced

Injection Molded Polypropylene (IMPP)

cone construction

• Butyl rubber surround and polycoon / coon

dual spider for strength and linearity during high

excursion

• Oversized 60 oz double stacked magnet and vented

pole yoke for increased power handling

• Smooth and seamless integration with Pioneer

A-series full-range automotive loudspeakers

A-series sound design

• High power handling and

high sensitivity

• Powerful and accurate bass

• Frequency matched to

Pioneer A-series full-range

loudspeakers

• Polycoon / coon

dual spider

Pioneer’s A-series sound design purposely matches the subwoofer and

full-range loudspeakers to provide seamless and smooth sound

characteristics with dynamic, high impact bass that lets you hear and feel

the music.

• Extended

voice coil,

dual spider

design for

increased

linearity

and high

excursion

Linear, balanced motion in both the forward and reverse directions of cone

movement is critical to accurate reproduction of recorded sound waves.

Careful engineering of the entire motor structure and suspension system

(voice coil, magnet, surround and spider) is required maintain a high level of

linearity, even during high output / high excursion transients.

Displacement dierence (mm)

Input power

Frequency (Hz)

32 Was

65 Was

128 Was

256 Was

FEATURES AND TECHNOLOGY

• Butyl rubber

surround

• Glass fiber and mica

interlaced IMPP cone

provides powerful and

accurate bass

MicaGlass fiber

• Oversized

motor with

double stacked

magnets

• Reinforced

spider

mounting

collar

• 4-layer, copper

voice coil

• Slit-shaped port with Smooth

Flow technology optimized

with advanced Computer-

Aided acoustical modeling for

superior control of air flow

and pressure within the port,

reducing turbulence induced

distortion (chuing)

Conventional

port

TS-A300B

Smooth

Flow

port

Frequency

Note: Specifications, designs, and user interfaces are subject to modification without notice. Product

colors and illumination may dier in photographs from actual appearance due to eects of printing and

photography.

PIONEER and the Pioneer logo are trademarks or registered trademarks of Pioneer Corporation.

All other brand, product names, or logos are trademarks or registered trademarks of their respective

holders.

2018 TS-A300B - 11/18 v2

PIONEERELECTRONICS.COM/CAR

CHECK OUT MORE AT

FACEBOOK.COM/PIONEERNORTHAMERICA

INSTAGRAM.COM/PIONEERCARAUDIO YOUTUBE.COM/PIONEERELECTRONICS

TWITTER.COM/PIONEERUSA

Pioneer Electronics (USA) Inc. proudly supports and

encourages you to support the Consumer Technology

Association (CTA), Mobile Electronics Certification

Program (MECP) for installers and the Specialty

Equipment Market Association (SEMA).

TS-A300B

Dimensions

Inches

WARNING: Over time, your hearing “comfort level” adapts to higher volumes of sound, so that what sounds “normal” can actually be doing harm. To protect against hearing loss,

set your equipment’s volume at a low seing, slowly increase it until you can hear it comfortably and clearly, and leave it there. Do not turn up the volume so high that you can’t hear

what’s around you.

Protect your investment. Purchase from an Authorized Pioneer Dealer. Only products purchased from an Authorized Pioneer Dealer (or Authorized Pioneer Internet Dealer) qualify for the manufacturer’s warranty and

manufacturer’s rebates. Pioneer Electronics (USA) Inc., Post Oice Box 1760, Long Beach, California 90801 Pioneer Customer Service Department: 1-800-PIONEER

For a virtual listening demonstration of these

and many other Pioneer car speakers, download the free

Pioneer CarSoundFit app.

Frequency matched Pioneer A-series full-range speakers available in the following sizes and applications:

TS-A6960F, TS-A6970F, TS-A6990F (6˝x 9˝) • TS-A6880F (6˝x 8˝) • TS-A1670F, TS-A1680F ( ˝) • TS-A1370F (5-1/4˝) • TS-A4670F (4˝x 6˝)6.5

Pioneer A-series Subwoofers TS-A300D4 (also available) TS-A300B TS-A250D4 (also available)

System Type Component subwoofer Pre-loaded subwoofer (passive) Component subwoofer

Sound Pressure Level (Sensitivity) 77dB (± 1.5dB) 78dB (± 1.5dB) 74dB (± 1.5dB)

Frequency Range 20 Hz to 2.3 kHz 20 Hz to 2.6 kHz 20 Hz to 2 kHz

Continuous Power Handling (RMS) 500 Was 500 Was 400 Was

Maximum Peak Power Handling 1500 Was 1500 Was 1300 Was

Nominal Impedance 4Ω Dual Voice Coil (DVC) 2Ω 4Ω Dual Voice Coil (DVC)

Woofer Cone Diameter 12˝ 12˝ 10˝

Woofer Cone Material

Glass fiber and mica reinforced

Injection Molded Polypropylene

(IMPP)

Glass fiber and mica reinforced

Injection Molded Polypropylene

(IMPP)

Glass fiber and mica reinforced

Injection Molded Polypropylene

(IMPP)

Woofer Surround Butyl Rubber Butyl Rubber Butyl Rubber

Basket Material Stamped Steel Stamped Steel Stamped Steel

Spider Polyester-Coon / Coon

(double)

Polyester-Coon / Coon

(double)

Aramid Fiber

(single)

Magnet Material Double stacked ferrite Double stacked ferrite Double stacked ferrite

Magnet Weight 60 oz 60 oz 56 oz

Voice Coil Former Material Kapton Kapton Aluminum

Voice Coil Wire Material Copper, round wire, 4-layer Copper, round wire, 4-layer Copper, round wire, 4-layer

Mounting Depth 5.8˝ - 5.25˝

Fs (Hz) 25 Hz - 30 Hz

Qts 0.69 0.59-

Vas (liters • cu ft.) 87.1 • 3.07 - 36.6 • 1.29

Xmax (mm • inch) 10.1 • 0.4 - 10.8 • 0.43

Sealed Enclosure Volume cu ft.

(min • rec • max) 0.85 • 1.25 • 1.75 - 0.5 • 0.7 • 0.8

Ported Enclosure Volume cu ft.

(min • rec • max)

1.25 (3˝x 6˝ port) • 1.5 (3˝x 6.5˝ port)

2.0 (3˝x 4˝ port) -0.6 (2˝x 6˝ port) • 0.7 (2˝x 5˝ port)

0.8 (2˝x 4˝ port)

Enclosure Type - Bass-reflex (ported) -

Enclosure Dimensions (w x h x d) - 19˝ x 14-3/4˝ x 18-1/4˝ -

Weight - 30.0 lb -

Enclosure covering material - High impact black carpet -

Included accessories -Mounting brackets, mounting

screws -

Specyfikacje produktu

Marka:	Pioneer
Kategoria:	subwoofer
Model:	TS-A300B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pioneer TS-A300B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje subwoofer Pioneer

Pioneer TS-A3000LS4 Instrukcja

30 Września 2024

Pioneer TS-WX140DA Instrukcja

23 Września 2024

Pioneer TS-A300D4 Instrukcja

18 Września 2024

Pioneer TS-A3000LB Instrukcja

17 Września 2024

Pioneer TS-Z10LS4 Instrukcja

14 Września 2024

Pioneer TS-SW251 Instrukcja

13 Września 2024

Pioneer TS-A2500LS4 Instrukcja

13 Września 2024

Pioneer S-W1EX Instrukcja

12 Września 2024

Pioneer UD-10GL Instrukcja

10 Września 2024

Pioneer TS-Z10LS2 Instrukcja

4 Września 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

JL Audio SGR-10TW3 Instrukcja

13 Października 2024

Teufel T6 Instrukcja

13 Października 2024

Polk DB1040 Instrukcja

10 Października 2024

OSD Audio NERO DUAL X8 Instrukcja

9 Października 2024

OSD Audio NERO WSA Instrukcja

9 Października 2024

Kicker 51CWQ102 Instrukcja

9 Października 2024

Kicker 51CWQ122 Instrukcja

9 Października 2024

Kicker 43C84 Instrukcja

9 Października 2024

Kicker 51CWQ124 Instrukcja

9 Października 2024

OSD Audio FS12 Instrukcja

9 Października 2024