Instrukcja obsługi Pioneer S-SL100CR

Pioneer Zestaw kina domowego S-SL100CR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pioneer S-SL100CR (80 stron) w kategorii Zestaw kina domowego. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/80
1
En
ඵᖑᏣقಜ
ᐈձКь
S-SL100-LR
S-SL100CR
S-SLW500
Subwoofer / Enceinte d’extrêmes graves / Subwoofer / Subwoofer /
Subwoofer / Altavoz de subgraves / Subwoofer / Subwoofer /
Subwoofer / Subwoofer / Apubassokaiutin / Сабвуфер /
ົմॲඵᖑᏣ
cover_S-SL100-LR_S-SL100CR.fm 1 ページ ２０１１年４月１１日　月曜日　午前１０時４５分
2
En
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the
instructions, put them away in a safe place for future reference.
Before you start
S-SL100-LR/S-SL100CR
• This speaker system has an impedance of 8 Ω, and should be
connected only to an amplifier designed with a load
impedance of 8 Ω (the amplifier’s speaker output connector
should clearly be labeled “8 Ω”).
In order to prevent damage to the speaker system resulting
from input overload, please observe the following precautions:
•Do not supply power to the speaker system in excess of the
maximum permissible input.
•When using a graphic equalizer to emphasize loud sounds in
the high-frequency range, do not use excessive amplifier
volume.
•Do not try to force a low-powered amplifier to produce loud
volumes of sound (the amplifier’s harmonic distortion will be
increased, and you may damage the speaker).
Caution: installation
• Do not place the speaker on an unstable surface, as doing so
may cause the speaker to fall and cause damage or bodily
injury.
• Switch off and unplug your AV equipment and consult the
instructions when connecting up components. Make sure you
use the correct connecting cables.
• Install the center speaker below the TV. When installing the
center speaker on top of the TV, be sure to secure it with tape
or some other suitable means. Otherwise, the speaker may fall
from the TV due to external shocks such as earthquakes,
endangering those nearby or damaging the speaker.
Caution: in use
• Do not use the speaker to output distorted sound for long
periods of time. This can result in damages to the speaker and
poses a potential fire hazard.
• Do not place heavy or large objects on top of the speaker.
Doing so could provoke the speaker to fall, causing damages
or bodily injury.
• The speaker system grill cannot be removed. Do not try to
forcibly remove it since doing so may damage the grille.
• This product incorporates autoregression technology to
protect the speakers. If the speakers stop emitting noise when
receiving too large a signal, turn the volume down on the amp
and wait a few seconds. The protection feature disables itself
automatically.
S-SLW500
• This product is a passive subwoofer, and must be combined
with the VSX-S300 or other audio device provided with a built-
in subwoofer amplifier.
• This speaker system has an impedance of 4 Ω, and should be
connected only to an amplifier designed with a load
impedance of 4 Ω (the amplifier’s speaker output connector
should clearly be labeled “4 Ω”).
In order to prevent damage to the speaker system resulting
from input overload, please observe the following precautions:
•Do not supply power to the speaker system in excess of the
maximum permissible input.
•When using a graphic equalizer to emphasize loud sounds in
the high-frequency range, do not use excessive amplifier
volume.
•Do not try to force a low-powered amplifier to produce loud
volumes of sound (the amplifier’s harmonic distortion will be
increased, and you may damage the speaker).
Caution: installation
• Do not place the speaker on an unstable surface, as doing so
may cause the speaker to fall and cause damage or bodily
injury.
• Switch off and unplug your AV equipment and consult the
instructions when connecting up components. Make sure you
use the correct connecting cables.
• Do not attach these speakers to the wall or ceiling, as they may
cause injury in the event of a fall.
Caution: in use
• Do not use the speaker to output distorted sound for long
periods of time. This can result in damages to the speaker and
poses a potential fire hazard.
• Do not place heavy or large objects on top of the speaker.
Doing so could provoke the speaker to fall, causing damages
or bodily injury.
• Do not sit or stand on the speaker, or let children play on the
speaker. Doing so could provoke the speaker to fall, causing
damages or bodily injury.
• The speaker system grill cannot be removed. Do not try to
forcibly remove it since doing so may damage the grille.
Cleaning the speaker cabinet
With normal use, wiping with a dry cloth should be sufficient to
keep the cabinet clean. If necessary, clean with a cloth dipped in
a neutral cleanser diluted five or six times with water, and wrung
out well. Do not use furniture wax or cleansers.
Never use thinners, benzine, insecticide sprays or other chemicals
on or near this unit since these will corrode the surfaces.
Pioneer is not responsible for any accidents or damage that
result from improper installation, misuse or modification of
the product, or natural disasters.
S-SL100-LR_S-SL100CR_En.fm 2 ページ ２０１１年４月１２日　火曜日　午前１１時３１分
3
En
English
What’s in the box
S-SL100-LR
• Speaker cord (4 m) x 2
• Non-skid pads x 8
• Warranty card x 1 (European model only)
• Operating instructions (this document)
S-SL100CR
• Speaker cord (4 m) x 1
• Speaker cord (10 m) x 2
• Non-skid pads x 12
• Warranty card x 1 (European model only)
• Operating instructions (this document)
S-SLW500
• Speaker cord (3 m) x 1
• Non-skid pads x 4
•Seal x 4
• Warranty card x 1 (European model only)
Installation
S-SL100-LR/S-SL100CR
Install non-skid pads
Use the accessory non-skid pads as necessary, depending on your
installation location.
Lay the unit on its side on soft cloth or other material that will not
scar the unit.
S-SLW500
Installing the subwoofer
The subwoofer can be mounted in either vertical or horizontal
orientation. The factory default is horizontal orientation.
For vertical orientation installation
1 The feet are attached with Phillips screws; use a Phillips
screwdriver to remove them.
2 Apply the accessory seals to the place the feet were
located to hide the screw holes.
3 Apply the non-skid pads to the four corners of the surface
where the subwoofer is to be mounted. Note that the non-
skid pads may not be fully effective on all surfaces, so do not
install in slippery locations.
･Do not attempt to perform these procedures while tilting the
unit at an angle. Lay the unit on its side on soft cloth or other
material that will not scar the unit.
Mounting location
Non-skid pads
Non-skid pads
Step 1
Step 2
Step 3
Seals
Feet
Non-skid pads
50˚ to 60˚
S-SL100-LR_S-SL100CR_En.fm 3 ページ ２０１１年４月１２日　火曜日　午前１１時３１分

Specyfikacje produktu

Marka: Pioneer
Kategoria: Zestaw kina domowego
Model: S-SL100CR

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pioneer S-SL100CR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zestaw kina domowego Pioneer

Pioneer

Pioneer EV-5DVD Instrukcja

15 Września 2024
Pioneer

Pioneer DCS-585K Instrukcja

8 Września 2024
Pioneer

Pioneer HTZ-170DVD Instrukcja

5 Września 2024
Pioneer

Pioneer XV-EV700 Instrukcja

4 Września 2024
Pioneer

Pioneer HTP-2920 Instrukcja

3 Września 2024
Pioneer

Pioneer HTZ-121DVD Instrukcja

3 Września 2024
Pioneer

Pioneer NS-DV77 Instrukcja

31 Sierpnia 2024
Pioneer

Pioneer XV-DV900 Instrukcja

30 Sierpnia 2024
Pioneer

Pioneer XV-HTD7 Instrukcja

30 Sierpnia 2024
Pioneer

Pioneer HTZ-323DV Instrukcja

26 Sierpnia 2024

Instrukcje Zestaw kina domowego

Najnowsze instrukcje dla Zestaw kina domowego

Samsung

Samsung HT-D5200 Instrukcja

15 Stycznia 2025
Sony

Sony Bravia Theatre Quad YY2080C Instrukcja

14 Stycznia 2025
Hyundai

Hyundai H-HT5108 Instrukcja

12 Stycznia 2025
LG

LG BH4030C Instrukcja

12 Stycznia 2025
Samsung

Samsung HT-AS725 Instrukcja

8 Stycznia 2025
Magnavox

Magnavox MSB3610 Instrukcja

7 Stycznia 2025
LG

LG HB600 Instrukcja

5 Stycznia 2025
Mitsai

Mitsai DV3630 Instrukcja

28 Grudnia 2024
Sony

Sony WS-WV10C Instrukcja

22 Grudnia 2024
Sony

Sony WS-FV10C Instrukcja

22 Grudnia 2024