Instrukcja obsługi Phoenix Gold Z212AB-V2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Phoenix Gold Z212AB-V2 (4 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Models: Z212AB-V2
Z-Series
Enclosures
Z-Series Enclosures
© 2017 Phoenix Gold • www.phoenixgold.com
Z212AB-V2 - Dual 12” Active Wedge Enclosure
Disclaimer
Always ensure the Active Enclosure is securely attached, to avoid movement. PHOENIX GOLD accepts no responsibility
for damage or injury in relation to inappropriate securing of this product.
Control Descriptions
LEVEL
This allows the adjustment of the amplier level of the
subwoofer. Turn clockwise to increase the level. If the
sound becomes distorted reduce the level.
LOW PASS FILTER (LPF)
This allows the adjustment of the highest frequency the
Active Enclosure will produce. This should be adjusted
to blend with your main speakers. Typically, this will be
set to around 100Hz (approximately the central position
of the control knob)
BASS REMOTE CONTROLLER
This control can be mounted in the front of the vehicle
to give you control of your subwoofers output level.
Installation
Make sure the Active Enclosure is rmly xed in your
vehicle. Check before drilling or cutting holes. DO
NOT work near fuel tanks, fuel lines hydraulic lines or
electrical wiring.
DO NOT mount the Active Enclosure in such a way as
to pinch or damage the wires.
Make sure everything is rmly connected before
attaching a +12V wire. Ensure the +12V wire is fused as
close as possible to the battery. Always use a fuse with
the recommended rating.
Wiring
• Connect the ground wire to the vehicle rst
(clean dirt and paint to bare metal)
• Connect the remote on (blue wire)
• Connect the RCA cables if applicable OR
• Connect the speaker level wire by splicing
into the headunits speaker wires. See Note1
on adjacent page.
• Connect the remote level controller with the
supplied lead
• Please ensure power wire is fused within 12
of battery
• Connect the 12 volt (red wire) to the positive
battery terminal.
• Check all connections.
SPECIFICATION Z212ABV2
Peak Power (Watts) 640 Watts
Max Power (Watts) 320 Watts
RMS Power (Watts) 160 Watts
Frequency Response 10Hz-200Hz
Low Pass Filter (Variable) 50Hz-200Hz
Tuning Bass Reex
Woofer Size Dual 12”
Fuse 25A
Dimensions (mm/inches) 824(w) x 383(h) x 395(d)
32.44” x 15.07” x
© 2017 Phoenix Gold • www.phoenixgold.com
Z-Series Enclosures
Z110AB-V2 - Z112AB-V2

Specyfikacje produktu

Marka: Phoenix Gold
Kategoria: subwoofer
Model: Z212AB-V2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Phoenix Gold Z212AB-V2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje subwoofer Phoenix Gold

Phoenix Gold

Phoenix Gold ZONE122 Instrukcja

4 Października 2024
Phoenix Gold

Phoenix Gold Z12D4 Instrukcja

4 Października 2024
Phoenix Gold

Phoenix Gold ZXMSP2 Instrukcja

4 Października 2024
Phoenix Gold

Phoenix Gold Z212AB-V2 Instrukcja

4 Października 2024
Phoenix Gold

Phoenix Gold ZR10P Instrukcja

4 Października 2024
Phoenix Gold

Phoenix Gold MX12D2 Instrukcja

3 Października 2024
Phoenix Gold

Phoenix Gold RX112D Instrukcja

3 Października 2024
Phoenix Gold

Phoenix Gold RX210D Instrukcja

3 Października 2024
Phoenix Gold

Phoenix Gold SX110D2 Instrukcja

3 Października 2024
Phoenix Gold

Phoenix Gold GX10 Instrukcja

3 Października 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

Audison

Audison Prima APBX 8 DS Instrukcja

4 Października 2024
Velodyne

Velodyne Deep Waves 10 Instrukcja

3 Października 2024
Klipsch

Klipsch PRO-1000SW Instrukcja

3 Października 2024
Totem

Totem KIN Sub Instrukcja

3 Października 2024
Velodyne

Velodyne Deep Waves 12 Instrukcja

3 Października 2024
Kanto

Kanto SUB8V Instrukcja

3 Października 2024
Canton

Canton Sub 10.4 Instrukcja

3 Października 2024
Canton

Canton Sub 12.4 Instrukcja

3 Października 2024
FBT

FBT MUSE 218SA Instrukcja

3 Października 2024