Instrukcja obsługi Phoenix Audio Ascent Two

Phoenix Audio odbiornik Ascent Two

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Phoenix Audio Ascent Two (6 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
PHOENIX AUDIO
Costa Mesa
CA 92626
USA
Telephone +1 866 302 1091
Email : sales@phoenixaudio.net
Owner’s Manual
Firstly, let us congratulate you on your purchase of the Ascent Two EQ Microphone Pre-
Amplifier/DI/Eq. The Ascent Two EQ is a 4 Band Gyratory-based Eq with 12 selectable
frequencies, and Mic, Line, and DI inputs We know you will be as pleased with it’s sonic
qualities as we are.
You are now the proud owner of a Mic-pre/DI/Eq that has the advantages of more than 25
years experience in audio engineering, today’s component and manufacturing technology, but
still retaining “that sound” uniquely achievable through Class A design.
As you can tell, Phoenix Audio is dedicated to the development of Class A discrete
technology used within high build-quality equipment.
The Ascent Two EQ uses our well proven and loved Class A output stage (DSOP-2), but
also has our latest breakthrough in transformer-less Class A, Discrete, truly-balanced
Mic Input Technology which gives a "valve-like" sound. It also incorporates our high
input impedance DI circuitry.
You CAN hear the difference!!!
Ascent Two EQ Specifications
1U rack space unit: With 240V/110V mains voltage input selector switch
Class A (DSOP- Frequency response: 20Hz to 20kHz +- 0.5dB, 2) Output specs.
Maximum Output Level: +26dBu @ 1kHz
Noise: -90dB @ 20Hz to 20kHz.
Output connections: XLR and TSR 1/4" Jack on rear
Phoenix Audio’s unique Class A, transformer-less, True balanced Mic input stage.
Microphon XLR on Rear Panele/Line input:
DI inputs: ¼” TSR Jack on Front Panel
Individual Earth Lift: -button SwitchesPush
Gain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the fader.
Gain reduction: -15dB pad push-button Mic/Line switch (Mic input)
High Input Impedance DI: Mono 1/4" Jack on front panel (no FETs)
Gain Meter: LED Metering. (Green = 0dB, Yellow = +8dB, corresponding to “4” and “6”
on a PPM Meter).
Phantom Power: Switchable phantom on Push-button Switch
High Pass Filter: -off starts at 80Hz @ 6dB per Octave.Roll
Phase Reverse: on Push-button Switch
Frequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHz
Frequency Response: DI Input Stage: -0.3dB @ 40Hz, - 0.5dB @ 25kHz
Typical Headroom: +26dB on Mic-Pre stage
Gyratory-based EQ Frequency Centres: (4 Bands) High – 25K (Sheen) 15K, 10K, Hi
Mid - 6K, 3K, 1K6, Low Mid – 800Hz, 400Hz, 200Hz, Low - 130Hz, 80Hz, 40Hz
EQ Cut/Boost Levels: 16dB Cut/Boost Per Band with fully detented pots in 21 positions
DI Stage gain: Maximum of 30dB gain range
CONNECTIONS AND CONTROLS
Front Panel
Rotary Gain Sensitivity Switch: The sensitivity switch operates in both Mic and Line Mode. For Microphone
mode the switch’s gain range is marked from -30dB to -70dB. When the switch is pressed in the sensitivity Pad
of the gain control is -15dB lower than the marked gain.
Output Level Rotary knob: The Output level knob controls the level at the output XLR on the rear panel only.
It does not affect the input sensitivity.
Level LED’s: The LED’s are marked 0 (Green) and +8 (Red). These are set to illuminate at 0dB and +8dB
(Corresponding to 4 and 6 on a PPM Meter). The LED’s are PPM style metering and have some hysteresis to
allow a better view of fast changing levels.
These LED’s are connected to the OUTPUT stage of the unit to give you a clear view of what level is being sent
to external equipment.
DI Input ” Jack socket: ¼The Jack socket is a TS socket wired Tip-Hot, Sleeve-Cold. The DI input is a high
input impedance circuit (without the use of FETs), and is capable of accepting a wide range of instruments, from
keyboards to guitars and more.
EQL Push Button: Engages the Gyratory Based Eq circuit when depressed.
DI Push Button: Disconnects the Input XLR and engages the DI Jack on the front panel.
HPF Push Button: Engages the High Pass Filter. The filter is active regardless of which input is being used.
Phase Push Button: Reverses the Phase of the Input XLR only.
+48V Push Button: Applies 48V Phantom Power to the Input XLR. The phantom power will be applied to the
XLR in both Mic and Line mode.
Mic/Line Pad Push Button: Switches the Input XLR between Mic/Line and a 15db lower level (depressed)
mode and is always lit orange.
Earth Lift Push Button: Disconnects internal 0v from the chassis earth. This is for use when using
microphones with their own PSU, or can be useful in situations where hum is being created by an earth loop.
This push-button does not disconnect the chassis safety earth from the mains earth.
REAR PANEL
Mic Input XLR: This XLR accepts both Microphone and Line level inputs. These can be balanced or
unbalanced inputs.
Output XLR: Transformer balanced output. Can be used at the same time as the Output ” TRS Jack¼, as long
as total loading does not exceed 200R.
INPUT and OUTPUT connections:
The Ascent Two EQ is fitted with an XLR input on the rear panel. The XLR's are industry-standard Pin 1 -
Ground, Pin 2 - - Cold. Hot, Pin 3
The DI input is a standard 1/4" (6.35mm) mono jack socket (wired Standard - -hot, Sleeve-Ground) Tip
The Output of the unit is on the rear of the unit and is available on both a 3 Pin XLR (wired as the input XLR),
and a Stereo 1/4" (6.35mm) Jack socket (wired Tip-Hot, Ring-Cold, Sleeve-Ground). The outputs are wired in
parallel.

Specyfikacje produktu

Marka: Phoenix Audio
Kategoria: odbiornik
Model: Ascent Two

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Phoenix Audio Ascent Two, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Phoenix Audio

Phoenix Audio

Phoenix Audio Ascent Two Instrukcja

17 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024