Instrukcja obsługi Phaesun DC167S-52123MB

Phaesun Wentylator DC167S-52123MB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Phaesun DC167S-52123MB (8 stron) w kategorii Wentylator. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
PHAESUN GmbH
INSTRUCTION MANUAL
READ AND SAVE THESE INSTRUCTIONS
WARNING: To avoid fire shock and serious personal injury, follow these instructions.
Important Safety Instructions
Table of Contents
WARNING
!
1. Read all instructions and safety information before installing your new fan.
Review the accompanying assembly diagrams.
2. Before installing the fan, disconnect the power by removing fuses or turning off circuit
breakers.
3. Make sure that all electrical connections comply with local codes, ordinances, or
National Electrical Codes. Hire a qualified electrician or consult a do-it -yourself
wiring handbook if you are unfamiliar with installing electrical wiring.
4. Make sure the installation site you choose allows the fan blades to rotate without any
obstructions. Allow a minimum clearance of 7 feet from the floor to the trailing edge of
the blades.
5. If you are mounting the fan on a ceiling outlet box, use a metal outlet box. Secure the
box directly to the building structure. The outlet box and its support must be able to
support the moving weight of the fan ( at least 50 lbs.). Do not use plastic outlet box.
Attach the mounting bracket using the hardware supplied with the ceiling outlet box.
6. If you are mounting the fan to a joist, make sure it is strong enough to support the
moving weight of the fan (at least 50 lbs.)
7. After you install the fan, make sure that all connections are secure, this will prevent
the fan from falling.
8. Do not insert anything into the fan blades while the fan is operating.
9. Turn the fan off and wait for it to stop before reversing fan direction.
10. To reduce risk of electrical shock and personal injury, do not install fan on sloped
ceiling.
11. o reduce risk of electrical shock and personal injury, do not use this fan with any
solid-state.
12. To reduce risk of personal injury, use only the two steel screws, and lock washers,
provided with the fan for mounting to the outlet box.
Tools Needed for Assembly ............................................... 1
Assembly Drawing ............................................................ 1
Parts List ......................................................................... 1
How to Assemble Your Ceiling Fan .................................. 1,2
How to Mount Your Fan Blades 2 ..........................................
How to Hang Your Fan 2,3 Ceiling .......................................
How to Wire Your Ceiling Fan ............................................ 3
How to Operate Your Ceiling Fan ...................................... 4
Maintenance ................................................................... 5
1
Parts List
CAUTION: To avoid possible electrical shock,
be sure electricity is turned off at the main fuse
box before assembling.
1. Securely attach the J-Hook to the ceiling joist
using the screws/washers/spring washers
supplied with the ceiling joist (Figure 2).
1. J - Hook (1)
2. Screw (2)/Washer (2)/Spring Washer (2)
3. Wire Connectors (3)
4. Rubber grommet (1)
5. Downrod (1)
6. Canopy (1)
7. Yoke Cover (1)
8. Canopy Setscrew (2)
9.Yoke Cover Setscrew (3)
10 Downrod Support
11. Downrod Support Setscrew (2)
12. Clevis Pin (1)
. Hairpin Clip (1)
14. Fan Motor Assembly (1)
15. Receiver Assembly (1)
16. Hand-Held Remote Transmitter (1)
17. Fan Blade Set (3)
18. Blade Setscrew (6)
19. Fan Wires
.
13
Assembly Drawing
Tools Needed for Assembly
-
- - Adjustable wrench Wire Cutters
- Stepladder
Philips Screwdriver Slotted Screwdriver-
This Manual Is Designed to Make it as Easy as Possible for You to
Assemble, Install, Operate and Maintain Your Ceiling Fan
How to Assemble Your Ceiling Fan
2.Remove the clevis pin and hairpin clip from the
downrod and retain them for reinstallation in
step 4.
Figure 2
Ceiling Joist
Screw (2)
Washer (2)
Spring Washer (2)
J - Hook
Outlet Box
6
18
17
16
Figure 1
3
4
19
1 2
3 4
5 6
F/R OFF
5
2
1
12
13
7
14
15
11
10
9
8

Specyfikacje produktu

Marka: Phaesun
Kategoria: Wentylator
Model: DC167S-52123MB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Phaesun DC167S-52123MB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wentylator Phaesun

Phaesun

Phaesun DC167S-52123MB Instrukcja

1 Października 2024

Instrukcje Wentylator

Najnowsze instrukcje dla Wentylator

Air King

Air King E130SH Instrukcja

10 Października 2024
TriStar

TriStar VE-5936 Instrukcja

10 Października 2024
Orbegozo

Orbegozo PW 1321 Instrukcja

10 Października 2024
Thermex

Thermex Silent 100 CZ Instrukcja

9 Października 2024
Imarflex

Imarflex IF-375BU Instrukcja

9 Października 2024
Imarflex

Imarflex IF-365BK Instrukcja

9 Października 2024
Solis

Solis Charge & Go Fan 7586 Instrukcja

9 Października 2024
Kogan

Kogan KARCDCFANLA Instrukcja

9 Października 2024
Westinghouse

Westinghouse 72206 Instrukcja

9 Października 2024
Westinghouse

Westinghouse 78425 Instrukcja

9 Października 2024