Instrukcja obsługi Peerless-AV PWA-14S

Peerless-AV akcesoria do projektorów PWA-14S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Peerless-AV PWA-14S (6 stron) w kategorii akcesoria do projektorów. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/6

ISSUED: 03-19-03 SHEET #: 017-9011-4 06-13-07

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

1 of 6

Installation and Assembly - Vector Pro™ and PRS Projector

Wall Mounts

Models: PWA-14,

PWA-14S,

PWA-14W

• This product was designed and intended to be mounted to the following supporting surfaces checked below with

the hardware included in this product as speciﬁed in the installation sheet. To mount this product to an alterna-

tive supporting surface, contact Peerless customer care at 1 800 865-2112.

• This product was designed to be installed on the following wall construction only;

WALL CONSTRUCTION ADDITIONAL HARDWARE REQUIRED

xWood Stud None

xWood Beam None

Solid Concrete Do not attach except with Peerless accessory kit for solid concrete;

Contact Customer Service for Peerless accessory kit for solid concrete.

Cinder Block Do not attach except with Peerless accessory kit for cinder block;

Contact Customer Service for Peerless accessory kit for cinder block.

Metal Stud Do not attach except with Peerless accessory kit for metal studs;

Contact Customer Service for Peerless accessory kit for metal studs.

Brick Contact Customer Service

Other or unsure? Contact Customer Service

WARNING

Max. Load Capacity

50 lb (22.7 kg)

Some of the following

tools may be required:

Drill, hammer, socket

wrench, pencil, stud finder

IMPORTANT! Read entire instruction sheet before you start installation and assembly.

IMPORTANT! Certain types of walls require additional mounting hardware...

TURN TO THE APPROPRIATE PAGE FOR YOUR INSTALLATION.

Installations:

To Wood Stud Walls.............................................................. step 2, page 3

To Concrete Walls...................................................................step 3, page 4

To Metal Stud Walls.................................................................step 4, page 5

ISSUED: 03-19-03 SHEET #: 017-9011-4 06-13-07

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

2 of 6

Description

support arm

carriage bolt

M10 locknut

M10 steel washer

M10 bronze washer

#14 x 2.5 phillips wood screw

threaded rod adapter

end cap

Qty.

Parts List

Part #

017-1019

580-1022

530-9402

540-9407

540-9441

5S1-015-C03

580-1021

590-1014

Some parts may appear slightly different

than illustrated.

Attach threaded rod adapter (G) to

support arm (A) using carriage bolt

(B), locknut (C), steel washer (D) and

bronze washer (E) as shown. Insert

end cap (H) into end of support arm

(A) as shown.

Part #

017-4019

580-2022

530-9404

540-9470

540-9441

5S1-015-C04

580-2021

590-4014

Part #

017-2019

580-2022

530-9404

540-9470

540-9441

5S1-015-C04

580-2021

590-1001

Model # PWA-14 PWA-14S PWA-14W

ISSUED: 03-19-03 SHEET #: 017-9011-4 06-13-07

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

3 of 6

∅ 5/32"

(4 mm)

Drill two 5/32" (4 mm) dia. holes 2 1/2" (65 mm) deep. Attach wall

arm (A) with #14 x 2.5"(6 mm x 65 mm) wood screws (F).

∅ 5/32"(4 mm)

Installation to a wood stud wall

• Tighten wood screws so that wall plate is firmly

attached, but do not overtighten. Overtightening can

damage the screws, greatly reducing their holding

power.

• Never tighten in excess of 80 in • lb (9 N.M.).

• Make sure that mounting screws are anchored into the

center of the studs. The use of an "edge to edge" stud

finder is highly recommended.

WARNING

Specyfikacje produktu

Marka:	Peerless-AV
Kategoria:	akcesoria do projektorów
Model:	PWA-14S
Kolor produktu:	Srebrny
Materiał obudowy:	Stal
Waga produktu:	1500 g
Kod zharmonizowanego systemu (HS):	85299097
Maksymalna waga:	22.7 kg