Instrukcja obsługi PCE Instruments PCE-WVE 100

PCE Instruments Sprzęt pomiarowy PCE-WVE 100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PCE Instruments PCE-WVE 100 (2 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

3 4

User Manual

Industrial WiFi Borescope

PCE-WVE 100

1.Safety Instructions

WARNING

READ AND UNDERSTAND ALL INSTRUCTION. Failure to follow all instructions listed below, may result in

electric shock, fire or serious personal injury.

• Read operator's manual carefully. Learn the applications and limitations, as well as the specific potential hazards,

related to this device. Following this rule will reduce the risk of electric shock, fire, or serious injury.

• Do not operate battery devices in explosive atmospheres, such as in the presence of flammable liquids, gases or

dust. Battery devices create sparks which may ignite the dust or fumes.

• Do not disassemble the device. Contact with internal parts may increase the risk of electric shock or cause damage

to the device.

• Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the device

in unexpected situations.

• Do not store the device in an area of high heat or humidity. Do not expose the device to extended high heat from

the sun (such as on a vehicle dashboard.) To reduce the risk of serious personal injury, do not store outside or in

vehicles. Damage to the device or the battery can result.

• Do not expose device to rain or wet conditions. Water entering a device will increase the risk of electric shock.

• Use the device in accordance with these instructions and in the manner intended for the device, taking into account

the environmental conditions and the work to be performed. Use of the device for operations different from those

intended could result in a hazardous situation.

• Do not use the inspection scope for diving or any other prolonged underwater use.

• The plastic housing is not waterproof. The camera cable is waterproof to 1.8M.

• Ensure the device is disconnected and turned off before inserting or changing batteries.

• Do not mix old and new batteries or different brands of batteries.

• Remove batteries from the device when not in use for an extended time.

• Always replace the alkaline battery with the same type of alkaline battery. Use of any other battery packs may

create a risk of injury and fire.

• This device should not be operated unless the battery compartment is closed.

• Do not place battery devices or their batteries near fire or heat. This will reduce the risk of explosion and possibly

injury.

• Do not crush, drop or damage battery. Do not use batteries that have been dropped or received a sharp blow. A

damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.

• Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious

personal injury, never use any battery device in the presence of open flame. An exploded battery can propel debris

and chemicals. If exposed, flush with water immediately.

• Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your

skin, wash immediately with soap and water. If liquid gets into your eyes, flush them with clean water for at least

10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal

injury.

• Save these instructions. Refer to them frequently and use them to instruct others who may use this device. If you

loan someone this device, loan them these instructions also.

2.Symbols

• The following signal words and meanings are intended to explain the levels of risk associated with this product.

DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious

injury.

CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate

injury.

Notice: (Without Safety Alert Symbol)Indicates important information not related to an injury hazard, such as a

situation that may result in property damage.

• Some of the following symbols may be used on this product. please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate the product better and safer.

Safety Alert: Indicates a potential personal injury hazard.

Resd Operator’s Manual: To reduce the risk of injury, user must read and understand operator's manual before

using this product.

V Voltage: Voltage

min Minutes: Time

Direct Current: Type or a characteristic of current

3.Features

• Attaches directly to your phone using the clip (included).

• Take pictures of the images captured by the scope.

• File your video and pictures.

• Share saved data.

• View dark areas with the 5-stage LED adjustment.

• Record a voice note in the image or video.

• Send live video to your phone.

4.Description

WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or

damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts

could result in serious personal injury.

WARNING: Do not attempt to modify this product or create accessories not recommended for use with this

product. Any such alteration or modification is misuse and could result in a hazardous condition leading to

possible serious personal injury.

4-1.Meter Description

1-Wi-Fi Status Indicator

2-Battery Indicator

3-Photo Button

4-Video Button

5-Power Button

6-Brightness Increase Button

7-Brightness Decrease Button

8-Bending Remote Rod

9-DC Input

10-Black Silk Tube

11-Camera

Please read this manual before switching the unit on.

Important safety information inside.

5 6

8Rev.220223

4-2.Icon Description/Function

1-Back

2-Take a Picture

3-Take a Video

4-90 Degree Rotation

5-Record Times

6-LED Brightness LED On/Off

7-Connect Device and View

8-About

9-File

10-Setting

5.Operation

5-1.Turning the Inspection Scope On/Off

5-1-1.Switching the endoscope On and Off

1.To turn the device On, press and hold the Button until the button starts to light up green (approximatelyPOWER

0.5 seconds).

2.The button should begin flashing within a few seconds, when it stops flashing and turns solid green, the scope is

ready to connect.

3.To turn the device Off, press and hold the Button for approximately 0.5 seconds until the button starts aPOWER

flashing red pattern, it will turn Off in a few seconds.

5-1-2.Camera Lighting

• So as to be able to use the endoscope even in absolutely dark areas, continuously dimmable LED lighting is

integrated in the camera head.

• The number on the screen, next to the sun symbol, indicates the brightness level of the LED light.

1.Press the “ ” Button to reduce the brightness.Bright -

2.Press the “ ” Button to increase the brightness.Bright +

3.Set the lighting in such a way that the monitor image displayed is not overexposed or underexposed.

5-4.Taking a Video

• Aim the scope at the target area.

• Select the video camera icon.

• Push the green button to start recording the video.

• Push the green button again to stop recording.

• To save, swipe the video to the left toward the file cabinet.

• To delete, swipe the video downward.

5-5.App Setting

• This app is optimized for: iOS versions 6.0 and higher; Android versions 4.0 and higher.

• At here you can setting Camera Setting, App Language and App Help.

• In camera setting you can set record time, resolution and frames.

5-6.File Function

• Two buttons at the bottom of this interface can switch between displaying videos and pictures.

• Click on the video preview or click on the image preview to go to the big picture view mode, where you can play

the video and delete or share the file.

5-1-3.Photograph

• Press the Button on the device.Photo

• The device will take photos and save them to the software of the smartphone.iScope

5-1-4.Video

• Press the Button on the device.Video

• The device will start record video, press the video button again to finish the recording.

• Device will save the recorded video to the software of the smartphone.iScope

5-1-5.Wi-Fi Status Indicator

• Not connected flashing white light.

• Connect the white long light.

5-1-6.Battery Status Indicator

• Green light for normal voltage, Low voltage red light.

• Green light flashes during charging, Full charge green light.

5-1-7.Camera Bending Remote Control

Push the control lever freely for 360 degrees to bend the camera in the corresponding direction.

5-2.Connecting The Inspection Scope with Your Smartphone

• Turn the device On.

• On your phone, turn the wireless network On and open to the wireless

connection screen.

• Select the network named with some trailing letters and numbers, NO

Password.

• Once the phone indicates that it is connected to the new network, go

the App on your phone.Meterbox iScope

• Select and open the App.Meterbox iScope

• Open the inspection scope app segment, the video feed should start

within a few seconds.

Note: Your phone may not have internet access while it is connected to

the inspection scope.

5-3.Taking a Picture

• Images can be saved and shared via email or social media.

• Aim the scope at the target area.

• Tap the camera On icon and tap the large white button.

• The picture will appear on the screen.

• To save, swipe the picture to the left toward the file cabinet.

• To delete, swipe the picture downward.

• Multiple pictures can be saved into each project.

Note: Pictures will be saved into the current project name, to save into another existing project, see managing your

projects.

5-7.File Management

Click on the upper right corner of the file interface to batch or manage a single file, including sharing and deleting

functions.

6.Charging the Battery

• The battery is located inside the handle of the endoscope. You should not replace the battery with any other

battery.

• The battery should only be removed or replaced by a specialist/specialist workshop.

• The battery status icon shows the remaining battery power in five levels, means the battery is fully charged.

• When using for the first time or if the battery level is lower, appears, meaning the battery has to be charged.

• To do so, proceed as follows:

1.Connect the DC 5V/1.5A charger to the charging port of the instrument.

2.Connect the power adapter to a mains outlet.

3.When charging, the red light will flash and the green light will be on for a long time.

4.The battery power indication can be seen in the App.

7.Technical Data

Operating Voltage

Battery Capacity

Charge

Camera

Camera Diameter

Gooseneck Length

Video Frame Rate

Field Angle

Optimum Focus

Protection Class

Operating Temperature

Storage Temperature

3.7V/DC, Lithium Battery

1400mAh

DC 5V/1.5A

1280x720 pixels, 6 withe LEDs

5.5mm

1M (1.5M/2M Optional)

30fps

75°

4 to 8cm

IP67 (Goose neck only)

0 to 50°C

-20 to 60°C

1280x720 640x480

Specyfikacje produktu

Marka:	PCE Instruments
Kategoria:	Sprzęt pomiarowy
Model:	PCE-WVE 100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z PCE Instruments PCE-WVE 100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Sprzęt pomiarowy PCE Instruments

PCE Instruments PCE-PMI 1 Instrukcja

14 Stycznia 2025

PCE Instruments PCE-324 Instrukcja

14 Stycznia 2025

PCE Instruments PCE-TC 32N Instrukcja

14 Stycznia 2025

PCE Instruments PCE-ACO 9500 Instrukcja

14 Stycznia 2025

PCE Instruments PCE-313A Instrukcja

10 Stycznia 2025

PCE Instruments PCE-320 Instrukcja

10 Stycznia 2025

PCE Instruments PCE-032-LED Instrukcja

10 Stycznia 2025

PCE Instruments FME Instrukcja

10 Stycznia 2025

PCE Instruments PCE-2500N Instrukcja

10 Stycznia 2025

PCE Instruments PCE-2550 Instrukcja

10 Stycznia 2025

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

Klein Tools CL810 Instrukcja

14 Stycznia 2025

Klein Tools CL710 Instrukcja

14 Stycznia 2025

Ebro PHT 830 Instrukcja

13 Stycznia 2025

Kern FL 1KG Instrukcja

10 Stycznia 2025

PeakTech 6193 Instrukcja

10 Stycznia 2025

Gossen Metrawatt PROFiTEST H+E EASY CHECK Instrukcja

10 Stycznia 2025

CSL 306637 Instrukcja

9 Stycznia 2025

TFA 40.1058.11 Instrukcja

9 Stycznia 2025

TFA SANDY 40.1043.06 Instrukcja

9 Stycznia 2025

TFA 40.1046 Instrukcja

9 Stycznia 2025