Instrukcja obsługi PCE Instruments PCE-PA 7200


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PCE Instruments PCE-PA 7200 (38 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/38
1. INTRODUCTION
NOTE
This Power Meter has been designed and tested
according to CE Safety Requirements for Electronic
Measuring Apparatus, IEC/EN 61010-1 and other safety
standards. Follow all warnings ensure safe operation.to
WARNING
READ "SAFETY NOTES" (NEXT PAGE) BEFORE
USING THE METER.
CAT IV Measurements performed the source the at of
low voltage installation.
CAT III Measurements performed in the building
installation.
CAT II
Measurements performed on circuits directly
connected to the low voltage installation.
-1-
2. SAFETY NOTES
1. Read following safety information carefully before the
attempting to operate or service the meter.
2. Use the meter only as specied in this manual.
Otherwise the protection provided by the meter may
be impaired.
3. Keep drying when using this product.
4. reduce To the risk of electric shock, do not remove
cover.
5. not use this product while getting wet.Do is
6. Never give shocks, such as vibration or drop, which
may damage the meter.
7. The maximum measurement current is 1000A.
8. Rated environmental conditions :
(1) Indoor 600Vac.
(2) Installation Category III.
(3) Pollution Degree 2.
(4) Altitude up 2000 meter.to
(5) Relative humidity max.80%
(6) Ambient temperature 0~40.
-2-


Specyfikacje produktu

Marka: PCE Instruments
Kategoria: Sprzęt pomiarowy
Model: PCE-PA 7200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z PCE Instruments PCE-PA 7200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Sprzęt pomiarowy PCE Instruments

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy