Instrukcja obsługi PCE Instruments PCE-FOT 10

PCE Instruments termometr PCE-FOT 10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PCE Instruments PCE-FOT 10 (9 stron) w kategorii termometr. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/9

Food / Hygiene Thermometer PCE-FOT 10

User Manual

User manuals in various languages (français,

italiano, español, português, nederlands, türk, polski,

русский, 中文

中文

中文中文) can be found by using our

product search on: www.pce-instruments.com

Last change: 26 July 2018

v1.0

English

Contents

1 Safety notes ........................................................................................... 1

2 Technical specications 2 ......................................................................

3 Interpretation of the measured values ................................................ 2

4 Device description ................................................................................ 3

5 Measurement ......................................................................................... 4

6 Settings / conguration mode ............................................................. 4

7 Advanced alarm settings 5 .....................................................................

8 Calibration 5 .............................................................................................

9 . 6 Contact ................................................................................................

10 Disposal ................................................................................................. 6

1 Safety notes

Please read this manual carefully and completely before you use the device for the rst time. The

device may only be used by qualied personnel and repaired by PCE Instruments personnel.

Damage or injuries caused by non-observance of the manual are excluded from our liability and

not covered by our warranty.

• The device must only be used as described in this instruction manual. If used otherwise,

this can cause dangerous situations for the user and damage to the meter.

• The instrument may only be used if the environmental conditions (temperature, relative

humidity, …) are within the ranges stated in the technical specications. Do not expose

the device to extreme temperatures, direct sunlight, extreme humidity or moisture. The

device is intended for indoor use.

• Before the measurement, the device should have stabilis ambient temperatureed at ,

which is important when moving from cold to warm rooms and vice versa.

• Do not expose the device to shocks or strong vibrations.

• The case should only be opened by qualied PCE Instruments personnel.

• Before making a measurement, make sure the device is entirely closed.

• Never use the instrument when your hands are wet.

• You must not make any technical changes to the device.

• The appliance should be cleaned with a damp cloth after each use. Use only pH-neutral

cleaner, no abrasives or solvents.

• The device must only be used with accessories from PCE Instruments or equivalent.

• When the frying oil tester is not used for a longer period of time, remove the batteries.

• Do not store the meter together with any chemicals.

• Before each use, inspect the case for visible damage. If any damage is visible, do not

use the device.

• Wear your personal protective equipment during each measurement to avoid injury.

This also applies to other people near the measuring location as oil splashes can cause

serious injury to human skin and eyes.

• To avoid burns, never touch the sensor or the metal shaft directly after the

measurement as these parts can become very hot when they are immersed into hot

oil.

• Remove the oil quality meter from the oil when you leave the place.

• Do not use the instrument in explosive atmospheres. Also avoid proximity to explosive,

easily ammable or chemical substances when the sensor is hot.

• Only use the device in systems that are electrically tested on a regular basis. Never

connect the conductive metal parts of the meter with a source of voltage. Inspect the

system visually before each measurement. If there are any signs of damage, do not

carry out any measurements until the problem has been resolved.

• The measurement range as stated in the specications must not be exceeded under

any circumstances.

• Non-observance of the safety notes can cause damage to the device and injuries to

the user.

We do not assume liability for printing errors or any other mistakes in this manual.

We expressly point to our general guarantee terms which can be found in our general terms of

business.

If you have any questions please contact PCE Instruments. The contact details can be found at

the end of this manual.

Specyfikacje produktu

Marka:	PCE Instruments
Kategoria:	termometr
Model:	PCE-FOT 10

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z PCE Instruments PCE-FOT 10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje termometr PCE Instruments

PCE Instruments PCE-PTH 10 Instrukcja

28 Grudnia 2024

PCE Instruments PCE-895 Instrukcja

28 Grudnia 2024

PCE Instruments PCE-FOT 10 Instrukcja

28 Grudnia 2024

Instrukcje termometr

Najnowsze instrukcje dla termometr

A&D Medical UT-201BLE-A Instrukcja

5 Stycznia 2025

Emos E6210 Instrukcja

31 Grudnia 2025

Neno Medic T02 Instrukcja

28 Grudnia 2024

Techno Line IR 200 Instrukcja

27 Grudnia 2024

Techno Line WS 1080 Instrukcja

27 Grudnia 2024

Techno Line IR 380 Instrukcja

27 Grudnia 2024

Techno Line WS 7002 Instrukcja

27 Grudnia 2024

Techno Line WS 7006 Instrukcja

27 Grudnia 2024

Techno Line WS7009 Instrukcja

27 Grudnia 2024

Medel No Contact Instrukcja

27 Grudnia 2024