Instrukcja obsługi PCE Instruments PCE-DRP 1

PCE Instruments Sprzęt pomiarowy PCE-DRP 1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PCE Instruments PCE-DRP 1 (5 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
Us Manual er
Refractometer PCE-DR Series
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: (561) 320-9162
Fax: (561) 320-9176
info@pce-americas.com
www.pce-instruments.com/english
www.pce-instruments.com
PCE Instruments UK Ltd.
Units 12/13
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: (0) 2380 98703 0
Fax: (0) 2380 98703 9
info@industrial-needs.com
Contents
1. Introduction ------------------------------------------------------------------------------------1
2. Display Areas and B ---------------------------------------------- -1-2uttons ---------------
3. Preparations before operating --------------------- 2-------------------------------------- --
4. and Booting calibration ------------------------------------------------------ ----------- 2-- ---
5. Measurement ------------------------------------------- ---- ----------- -------------------- - - 2-3
6. Scales converting and temperature systems converting - ------- --------- --3--- -- ---
7. Turn off the instrument ----------------------------------------------------------------- 3------
8. Maintenance and preservation -- ---------------------------- --------- -------------- -------3
Appendix 1 Performance / the error codes : table ------------------------------------3
Appendix 2 Models and specifications ( )------------- --------- 4: continued -- ----------
1. Introduction
PCE-DR series Portable Digital Refractometers are microprocessor-based with laboratory accuracy to be able to accurately and instantly
measure the refractive index(RI) , concentration and other parameters for many kinds of liquids, which also have a friendly operation
pattern and display field as well as an automatically temperature compensation system, comparing with the traditional hand held ones
they are much faster, more accurately, and clearly in measurements s to the details for series and models please refer to the Appendix , a
2.
1.1 Panel descriptions
P1.1
1. 2. 4.Stainless Steel Sample Plate LCD Display Screen 3 Keypad. Prism
5. 6. 7.Battery Compartment Removable Shell Cover
1.2 Host and the spare parts
This instrument includes 1 set of host dropper, 1 removable shell, 1 Covers and 1 AAA 1.5v battery., 1
Before operating your instrument, please read this manual properly.
2. Display Areas and Buttons
2.1 Display
This LCD screen has three main display areas, which are
host display area temperature display area, ,
and muti-function display area and others,
please see the P2.1 and the following description :
P 2.1
1. Battery volume unit
2. Host display area
3. % or ‰ unit
4. Refractive index (RI) unit
5. Temperature display area
6. Multi-function display area
Note: the battery volume signs’ table:
<1>
Battery Volume
Battery Volume Signs
80%-100%
50%-80%
20%-50%
↓20%
1
2
4
5
6
3
3
2
1
4
5
6
7
2.2 The buttons
D series has three buttons, respectively is:
1. The “Read” button: for booting / measuring.
2. The “Cal” button: for entering the model of calibrating “Zero Point”
3. The “Scale” button: for converting different scales / converting
temperature systems between Celsius Fahrenheit P2.2.1 and .
All the details please referrer to the P2.2.1.
3. ngPreparations before operati
3.1 Install the battery
1. Open the battery cabin by pushing the c s lock key alongover’
the direction of arrow showing, please see the P3.1.1
2. Refer to the P3.1.2 to p 1 piece of 1.5v battery into the cabinut
in a proper electrode side and recover the cabin again.
P3.1.1 P3.1.2
3.2 Install the wrist strap
Properly Install the wrist strap into the hole at the bottom of the instrument, referring to the figure P3.2.1 .
P3.2.1
4 Booting and Calibration.
4 .1 Booting
Press "Read" button for 1 second , the instrument would switching on and booting.
Please see the P4.1.1.
Note: 1.The multi-function display area would show the current scale number. P4.1.1
for example: S01 is expressed for the first scale.
2. Before dripping into the sample liquid, please clean the sample plate and Prism with soft clean cloth or soft paper.
3. Please keep the instrument in a stable and still statement and position.
4. Please ensure instrument, environment and sample are in the same temperature level before measuring.
4.2 Calibration
P4. 12.
1. CLOSE LID.Drip 4 ~ 5 sample plate.drops of distilled water in
2. Press “CAL” ‘ ’button for 2-3 seconds till see the CAL flashing ,
plese see the P4.2.1 shows.
3. Press button once again during CAL flashing, display"CAL" the ‘ ’ see the
as shown in the P4.2. , the calibration is 2 over, the value
would be no any 10seconds0.0%, see the P4.2.3. If operations for
the instrument would return back to booting status.
If fail to complete the calibration, multi-function display area would show .2 P4.2.3 P4.2
an error code. P ase see the P4.2.4 shows. le
Note: If multi-function area shows code A01 that means calibration1.
temperature exceeding the limitations, other error codes could
be checked the appendix error code page. in
2. Instrument support only distilled water calibration.
P4.2.4
5. Measurement
After the calibration, clear distilled dry sample plate, drip ~ 5 the water and the 4
drops of press quickly the "Read" button, the sample, CLOSE LID, 1 second
instrument would give the current value accordingly, after automatic temperature
compensation, please see
the P5.1, If exceeding scope, the measuring ‘HHH’ show or would ‘LLL’ in
the host display area, see the P5.2 please and P5.3. P5 .1
<2>
Push
S1

Specyfikacje produktu

Marka: PCE Instruments
Kategoria: Sprzęt pomiarowy
Model: PCE-DRP 1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z PCE Instruments PCE-DRP 1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Sprzęt pomiarowy PCE Instruments

PCE Instruments

PCE Instruments PCE-DD-A Instrukcja

28 Marca 2025
PCE Instruments

PCE Instruments PCE-128 Instrukcja

28 Marca 2025
PCE Instruments

PCE Instruments PCE-3000UL Instrukcja

28 Marca 2025
PCE Instruments

PCE Instruments PCE-BPD-C-66A Instrukcja

28 Marca 2025
PCE Instruments

PCE Instruments PCE-DFG N 5TW Instrukcja

28 Marca 2025
PCE Instruments

PCE Instruments PCE-MA 100 Instrukcja

28 Marca 2025
PCE Instruments

PCE Instruments PCE-MA 110 Instrukcja

28 Marca 2025
PCE Instruments

PCE Instruments PCE-DFG NF 5K Instrukcja

28 Marca 2025
PCE Instruments

PCE Instruments PCE-LES 103UV Instrukcja

28 Marca 2025
PCE Instruments

PCE Instruments PCE-HVAC 10 Instrukcja

28 Marca 2025

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

Topex

Topex 31C800 Instrukcja

28 Marca 2025
Grundfos

Grundfos Hydro Solo-E Instrukcja

28 Marca 2025
Victron Energy

Victron Energy Smart Battery Sense Instrukcja

27 Marca 2025
Einhell

Einhell NWL 90 Instrukcja

27 Marca 2025
Einhell

Einhell NLW 180 Instrukcja

27 Marca 2025
Einhell

Einhell NDM 15 Instrukcja

27 Marca 2025
Einhell

Einhell NKL 90/4 Instrukcja

27 Marca 2025
NEO Tools

NEO Tools 94-006 Instrukcja

27 Marca 2025
Kern

Kern KFP 6000V20M Instrukcja

26 Marca 2025
Kern

Kern KFP 1500V40M Instrukcja

26 Marca 2025