Instrukcja obsługi PCE Instruments PCE-DPD-U

PCE Instruments Sprzęt pomiarowy PCE-DPD-U

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PCE Instruments PCE-DPD-U (28 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/28

PCE-DPD-U

Mulsignal panel meter

Mulsignal digital panel meter, congurable to work as AC and DC voltmeter (up to 600 Vac / dc), AC and DC

ammeter (up to 5 Aac / dc), accepts process signals (mA, Vdc), thermocouples, resisve temperature probes

(Pt, Ni, PTC and NTC), resistances, potenometers and frequency. Congurable. Standard 96 x 48 mm size

(1/8 DIN). Scalable reading with 4 digits (9999 / -1999). ‘Fast access’ funcon to alarm setpoints, ‘external

control’ to acvate predened funcons, ‘Eco’ mode for low consumpon, selectable dual scaling, 5 levels

of congurable brightness. Single universal power supply 18 to 265 Vac/dc. Oponal modules for output

and control (relays, analog output, Modbus RTU).

User’s Manual

PANEL METERS

4822r06

www.pce-instruments.com

1. Panel meter PCE-DPD-U

Mulsignal 96 x 48 mm panel meter

Mulsignal digital panel meter in 96 x 48 mm size (1/8 DIN). Accepts

AC and DC voltage signals from mV up to 600 V and currents up to

5 A (AC measures in True RMS), process signals (mA and Vdc) with

excitaon voltage included, thermocouples K, J, E, N, L, R, S, B, T and

C, resisve temperature probes (Pt100, Pt500, Pt1000, Ni100, Ni200,

Ni1000, PTC and NTC), resistances, potenometers and frequency.

Scalable reading with 4 digits up to 9999 / -1999 with congurable

decimal point. Two independent alarms, congurable as maximum

or minimum, with hysteresis and setpoint.

Oponal 1 or 2 relay outputs, 4/20 mA isolated analog output, and

Modbus RTU isolated serial communicaons.

Front protecon IP50, with oponal IP65. Connecons with plug-in

screw terminals.

Index

1. Panel meter PCE-DPD-U . . . . . . . . . . . . . . . . . . . . 2

1.1 How to order . . . . . . . . . . . . . . . . . . . . . . . . 2

1.2 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.4 Power connecons . . . . . . . . . . . . . . . . . . . . . 3

1.5 Signal connecons . . . . . . . . . . . . . . . . . . . . . 3

1.6 Mechanical dimensions (mm) . . . . . . . . . . . . . . . 3

1.7 Installaon and start-up . . . . . . . . . . . . . . . . . . 3

1.8 Technical specicaons . . . . . . . . . . . . . . . . . . 4

1.9 Internal jumpers . . . . . . . . . . . . . . . . . . . . . . 5

1.10 Measuring AC voltages and AC currents. . . . . . . . . 6

1.11 Measuring DC voltages and DC currents . . . . . . . . 7

1.12 Measuring thermocouples . . . . . . . . . . . . . . . . 8

1.13 Measuring with Pt and Ni probes . . . . . . . . . . . . 9

1.14 Measuring with NTC probes . . . . . . . . . . . . . . .10

1.15 Measuring with PTC probes . . . . . . . . . . . . . . . 10

1.16 Process measures . . . . . . . . . . . . . . . . . . . . .11

1.17 Measuring frequency . . . . . . . . . . . . . . . . . . .11

1.18 Measuring resistances . . . . . . . . . . . . . . . . . . 12

1.19 Measuring potenometers. . . . . . . . . . . . . . . .12

1.20 ‘Fast access’ menu . . . . . . . . . . . . . . . . . . . . 13

1.21 Scaling . . . . . . . . . . . . . . . . . . . . . . . . . . .13

1.22 Oset reading . . . . . . . . . . . . . . . . . . . . . . . 13

1.23 ‘Eco’ mode. . . . . . . . . . . . . . . . . . . . . . . . . 13

1.24 External control . . . . . . . . . . . . . . . . . . . . . . 13

1.25 Second scaling. . . . . . . . . . . . . . . . . . . . . . . 13

1.26 To open the instrument. . . . . . . . . . . . . . . . . . 14

1.27 How to operate the menus. . . . . . . . . . . . . . . .15

1.28 Messages and errors . . . . . . . . . . . . . . . . . . .15

1.29 Conguraon menu. . . . . . . . . . . . . . . . . . . .16

1.29.1 Input signal ranges . . . . . . . . . . . . . . . . . . 16

1.29.2 Scaling . . . . . . . . . . . . . . . . . . . . . . . . . 17

1.29.3 Alarms . . . . . . . . . . . . . . . . . . . . . . . . . 17

1.29.4 Fast access . . . . . . . . . . . . . . . . . . . . . . . 18

1.29.5 Super fast access . . . . . . . . . . . . . . . . . . . 18

1.29.6 External control . . . . . . . . . . . . . . . . . . . .18

1.29.7 Menu ‘Tools’ . . . . . . . . . . . . . . . . . . . . . . 19

1.29.8 Conguring the opons. . . . . . . . . . . . . . . . 21

1.30 Full conguraon menu . . . . . . . . . . . . . . . . . 22

1.31 Precauons on installaon . . . . . . . . . . . . . . . .25

1.32 Factory conguraon . . . . . . . . . . . . . . . . . . .25

1.33 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 25

1.34 CE declaraon of conformity . . . . . . . . . . . . . . . 25

2. Output and control modules . . . . . . . . . . . . . . . . . 26

2.1 Modules PCE-DPD-U/R1 and PCE-DPD-U/R2 (relay output) . 26

2.2 Module PCE-DPD-U/A1 (analog output) . . . . . . . . . 26

2.3 Module PCE-DPD-U/MB1 (Modbus RTU) . . . . . . . . . 27

Instrument designed for industrial use, highly exible, allows for in-

tegraon in mulple applicaons, reduced cost, excellent quality and

oponal customizaon available.

• ‘Fast access’ menu at front key UP ( ) congurable for fast access 5

to alarm setpoints (see secon 1.20).

• ‘ ’ mode reduces power consumpon Eco

(see secon 1.23).

• Simplied scaling conguraon .(see secon 1.21)

• Funcon ‘ ’ to acvate with a contact a predened external control

funcon (second scaling, decimal point, reading ‘hold’, ‘tare’, memo-

ry of maximum or minimum) .(see secon 1.24)

• 5 congurable brightness levels .(see secon 1.29.7)

1.1 How to order

PCE-DPD

Model Opon 1

U - -

-R1 (1 relay)

-A1 (analog output)

-MB1 (Modbus RTU)

-(empty)

-U

(Power supply

18...265 Vac/dc)

Opon 2

-R2 (1 relay)

-(empty)

PCE Instruments | www.pce-instruments.com

1.2 Front view

1.4 Power connecons

1.5 Signal connecons

Key ‘UP’

Logo Units

Key ‘SQ’

Key ‘LE’

‘Conguraon menu’

(see secon 1.29)

‘Fast access‘

(see secon 1.29.4)

1.3 Rear view

Signal

(see secon 1.5)

Opon 2 Opon 1

Power

(see secon 1.4)

1 2 3 4 5 8 9 0

Detail of the plug-in screw terminals provided with

the instrument. The instrument is provided with all

terminals needed, both male and female.

Alarm 1Alarm 2

Earth connecon - The instru-

ment does not need earth con-

necon for correct operaon nor

for compliance with security reg-

ulaons. Terminal 9 is is not con-

nected to any internal circuit and

is provided only as a safe place

for earth wire.

Fuse - This instrument has not internal fuse. Conforming to security

regulaon 61010-1, add a protecon fuse to the power line to act as

disconnecon element, easily accessible to the operator and iden-

ed as a protecon device.

250 mA me-lag for power voltage > 50 Vac/dc

400 mA me-lag for power voltage < 50 Vac/dc

8 9 0

Power 18 to 265 Vac/dc

Signals up to 600 V and 200 V (AC and DC) must be connected at

terminals 1 and 4. Signals for 5 A current (AC and DC) must be con-

nected at terminals 3 and 4. All other signals must be connected

between terminals 2 and 4. Terminal 5 is a ‘mulfuncon’ terminal,

congurable with one of the following funcons :

• +15 Vdc excitaon voltage (Vexc) for process signals

• +5 Vdc excitaon for potenometer signals

• connecon for the Pt100 third wire compensaon

• external contact ‘EK’ funcon

To select the terminal 5 funcon, select the posion of internal jump-

er ‘T’

(see secon 1.9)

Panel

cut-out

16 8

1.6 Mechanical dimensions (mm)

HV signal

5 A {

{~Vac, ±Vdc, resistance, mA, pot,

thermocouple+, Pt+, Ni+, PTC+, NTC+

{

Signal

~600 Vac, 200 Vac ~

±600 Vdc, ±200 Vdc

~5 Aac, ±5 Adc

Common {neutral, 0 V, common

12345

mulfunc.

{Vexc, Pt100 3 wire, Pot+,

‘EK’ external control

1. Open the instrument as indicated at secon and access 1.26

the internal board.

2. Select jumpers ‘S’ for the signal range required (see secon

1.9).

3. Select jumper ‘T’ to assign to mulfuncon terminal 5 the re-

quired funconality .(see secon 1.9)

4. Close the instrument ad indicated at secon 1.26.

5. Connect the input signal and the power supply as indicated at

secons and .1.4 1.5

6. Enter the ‘ ’ to congure the instrument conguraon menu

(scaling, alarms, ...) ( ).see secon 1.29

1.7 Installaon and start-up

Units

Specyfikacje produktu

Marka:	PCE Instruments
Kategoria:	Sprzęt pomiarowy
Model:	PCE-DPD-U

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z PCE Instruments PCE-DPD-U, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Sprzęt pomiarowy PCE Instruments

PCE Instruments PCE-PMI 1 Instrukcja

14 Stycznia 2025

PCE Instruments PCE-324 Instrukcja

14 Stycznia 2025

PCE Instruments PCE-TC 32N Instrukcja

14 Stycznia 2025

PCE Instruments PCE-ACO 9500 Instrukcja

14 Stycznia 2025

PCE Instruments PCE-313A Instrukcja

10 Stycznia 2025

PCE Instruments PCE-320 Instrukcja

10 Stycznia 2025

PCE Instruments PCE-032-LED Instrukcja

10 Stycznia 2025

PCE Instruments FME Instrukcja

10 Stycznia 2025

PCE Instruments PCE-2500N Instrukcja

10 Stycznia 2025

PCE Instruments PCE-2550 Instrukcja

10 Stycznia 2025

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

Klein Tools CL810 Instrukcja

14 Stycznia 2025

Klein Tools CL710 Instrukcja

14 Stycznia 2025

Ebro PHT 830 Instrukcja

13 Stycznia 2025

Kern FL 1KG Instrukcja

10 Stycznia 2025

PeakTech 6193 Instrukcja

10 Stycznia 2025

Gossen Metrawatt PROFiTEST H+E EASY CHECK Instrukcja

10 Stycznia 2025

CSL 306637 Instrukcja

9 Stycznia 2025

TFA 40.1058.11 Instrukcja

9 Stycznia 2025

TFA SANDY 40.1043.06 Instrukcja

9 Stycznia 2025

TFA 40.1046 Instrukcja

9 Stycznia 2025