Instrukcja obsługi PCE Instruments PCE-789

PCE Instruments Sprzęt pomiarowy PCE-789

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PCE Instruments PCE-789 (34 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/34

Manual

Version 1.0

Date o creation: 17.08.2016f

Date o last change: 02f .09.2016

Multifunction Calibrator PCE-789

PCE Americas Inc.

711 Commerce Way

Suite 8

Jupiter

FL-33458

USA

From outside US: +1

Tel: (561) 320-9162

Fax: (561) 320-9176

info@pce-americas.com

www.pce-instruments.com/english

www.pce-instruments.com

PCE Instruments UK Ltd.

Units 12/13

Southpoint Business Park

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: (0) 2380 98703 0

Fax: (0) 2380 98703 9

info@pce-instruments.com

Contents

1 Introduction ............................................................................................................. 2

2 Safety notes ............................................................................................................. 2

3 Specification ............................................................................................................ 3

4 System description ................................................................................................. 6

5 Contact ................................................................................................................... 34

5.1 PCE Instruments UK ................................................................................................................ 34

5.2 PCE Americas .......................................................................................................................... 34

1 Introduction

Thank you for purchasing a calibrator PCE- rom PCE Instruments. 789 f

The multifunction calibrator PCE-789 is a versatile instrument for measuring and simulating of al the

process signals. Both current and voltage signals can be simulated and measured with the multifunction al

calibrator. The characteristics of many thermocouple types are stored in this

Multifunction calibrator and permit entry and display of values in ° C. a special feature in this device is the

an integrated functional generator. Besides the waveforms sine, triangle, square and cut sine 10 further

curve forms are stored in the multifunctional calibrator. In addition, due to the supplied software, also

specic waveforms can be created and stored in the device. Furthermore this device can output two ,

superimposed frequencies. This functionality is combined with a robust plastic housing and allows

applying this multifunctional calibrator in many areas. For maintenance engineer in industry, the engineer

in the laboratory, as well as for the technicians in the service area this Multifunction Calibrator is a useful

tool, with the help of which many tasks can be completed. For mobile use, in addition to the power supply

via a power adapter the operation on battery is also possible.

1.1 Delivery

1 x Carrying case

1 x Manual

1 x AC Adapter

1 x USB cable

1 x Software CD

1 x Software Guide

1 x K-type thermocouples

2 x Alligator clip (red and black)

2 x Test leads (black and red)

1 x Rechargeable Lithium Battery (11,1V / 1600mAh)

2 Safety Notes

Please read this manual carefully and completely before you use the device for the rst time. The device

may only be used by qualied personnel and repaired by PCE Instruments personnel. There is no

warranty of damages or injuries caused by non-observance of the manual.

2.1 Warning Symbols

General warning

Warning about dangerous electrical voltage

Manual

2.2 Warning Notes

 This instrument must only be used in the manner, described in this manual. If the instrument is

used otherwise, dangerous situations may occur.

 Do not expose the device to extreme temperatures, direct sunlight, extreme humidity or wetness.

 The opening of the case should only be done by the qualified personnel of the PCE Instruments.



The instrument should never be placed with the user interface (e.g. keyboard side on a table)

 Never use the device with wet hands.

 You should not make technical changes on the device.

 . Do not use abrasives or solvent-based The appliance should only be cleaned with a damp cloth

cleaners.

 The device may only be used with accessories oered by PCE or equivalent replacement.

 Before each use of this instrument, please, check the housing and test leads for visible damage.

If the visible damage occurs, the device may not be used.

 Further this instrument must not be used when the environmental conditions emperature, , (t

humidity ...) are not within the limits mentioned in the specications.

 The instrument must not be used in an explosive atmosphere.

 indicated by the battery indicator) the device should If the battery is empty, (e.g., it may be not be

used any more, as dangerous situations may arise because of false readings. Only after the

battery is replaced or the accumulator is charged, the meter may be used again.

 Before each use, please check the meter by measuring a known parameter.

 The limit values for the measurement parameters given in the specification may not be exceeded

under any circumstances.

 Before starting the measurement, always check, whether the correct measuring range is set, and

whether test leads are plugged into the sockets provided for the respective measurement. the

 The measurement tips should never be touch on the bare ends, since there is a risk of electric ed

shock.

 The device is designed for indoor use.

 Carry out the measurements of high voltages (> 30 V AC) with extra caution.

 Before opening the housing for the replacement of battery or fuse, please remove all test leads,

as otherwise there is a risk of electric shock.

 Non-observance of the safety notes may bring to the damage of the device and injury of the

operator.

This user's handbook is published from P Instruments without any guarantee. CE

We expressly point to our general guarantee terms, they can be found in our general terms of business.

If you have any questions please ntact PCE Instruments. co

3 Specification

(23+/- 5 ° C, 10 minutes after switching on)

mA (source function) (Vopen> 15V)

Measuring range

Resolution

Reading accuracy

-4mA to -0,005mA

1μA

± % / ± 5dgts 0.1

0,005mA to 4mA

1μA

± % / ± 5dgts 0.1

4mA to 20mA

1μA

± % / ± 5dgts 0.1

20mA to 24mA

1μA

± % / ± 5dgts 0.1

V (source function) (max. load 1mA, short circuit protection < 100mA)

Measuring range

Resolution

Reading accuracy

-3V to -0,005V

0.001V

± % / ± 5dgts 0.1

0,005V to 10V

0.001V

± % / ± 5dgts 0.1

10V to 15V

0.001V

± % / ± 5dgts 0.1

Specyfikacje produktu

Marka:	PCE Instruments
Kategoria:	Sprzęt pomiarowy
Model:	PCE-789

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z PCE Instruments PCE-789, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Sprzęt pomiarowy PCE Instruments

PCE Instruments PCE-PMI 1 Instrukcja

14 Stycznia 2025

PCE Instruments PCE-324 Instrukcja

14 Stycznia 2025

PCE Instruments PCE-TC 32N Instrukcja

14 Stycznia 2025

PCE Instruments PCE-ACO 9500 Instrukcja

14 Stycznia 2025

PCE Instruments PCE-313A Instrukcja

10 Stycznia 2025

PCE Instruments PCE-320 Instrukcja

10 Stycznia 2025

PCE Instruments PCE-032-LED Instrukcja

10 Stycznia 2025

PCE Instruments FME Instrukcja

10 Stycznia 2025

PCE Instruments PCE-2500N Instrukcja

10 Stycznia 2025

PCE Instruments PCE-2550 Instrukcja

10 Stycznia 2025

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

Klein Tools CL810 Instrukcja

14 Stycznia 2025

Klein Tools CL710 Instrukcja

14 Stycznia 2025

Ebro PHT 830 Instrukcja

13 Stycznia 2025

Kern FL 1KG Instrukcja

10 Stycznia 2025

PeakTech 6193 Instrukcja

10 Stycznia 2025

Gossen Metrawatt PROFiTEST H+E EASY CHECK Instrukcja

10 Stycznia 2025

CSL 306637 Instrukcja

9 Stycznia 2025

TFA 40.1058.11 Instrukcja

9 Stycznia 2025

TFA SANDY 40.1043.06 Instrukcja

9 Stycznia 2025

TFA 40.1046 Instrukcja

9 Stycznia 2025