Instrukcja obsługi Pavo AlaskaVigo A3
Pavo
System laminowania
AlaskaVigo A3
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pavo AlaskaVigo A3 (12 stron) w kategorii System laminowania. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
1
Instruction Manual
Model: A3 / A4 AlaskaVigor
Read this manual carefully before use. Keep it in safe for reference in need.
Thank you for buying this high-performance laminator! This laminator features a slim and
compact design. It accepts pouches ranging from cold,
75Mic, 100Mic, 125mic and 250mic with size from name card to A4/A3.
2
PRODUCT DESCRIPTION
SPECIFICATION
Voltage: 220-240V/50Hz Power: 4A/850W Model A4
5.6A/1300W Model A3
Ready time: 60 sec/75mic in 25℃
room temperature
Max Entry width: 230 mm Model A4
320 mm Model A3
Max thickness: 0.6 mm (paper & pouch) Best for pouch: Cold/75/100/125/250
Micron
Laminating speed: 300mm/Min No. of Rollers: 4
SAFETY NOTES
1. This laminator should be horizontally displayed in a flat plane with good ventilation.
2. This laminator should only use power 220-240V/50Hz and be used indoors only.
3. This laminator is for home and office use only.
4. NEVER OPEN THIS LAMINATOR WHILE IN USE.
UTILITY
It laminates both cold and hot pouches from name card size to A4/A3 size. It provides best
lamination for hot pouches of 75Mic, 100Mic, 125mic and 250mic. It preserves your photo,
document and card, etc. in its original color against aging from prolonged time.
Entry
LED
Switch Button
Reverse Button
Mode Button
3
OPERATION
POWER ON and OFF
Connect the plug to mains power, press "Switch Button" and "Mode Button" to turn on the
machine. The "Power/Cold LED" would turn into Red firstly and flash, it will turn into green
when ready.
To turn off this laminator, press "Switch Button" back to "Off" position, power will be cut off
and laminator is shut off.
COLD LAMINATION
Please make sure the machine is cool when you use cold lamination. Do not use cold
lamination if you just finish the job of hot lamination. Please switch the power off and the
machine will reset itself.
When "Power/Cold LED" turns into green and stays steady, please insert the paper into the
cold pouch, and insert the pouch into laminator through lamination entry.
HOT LAMINATION
You could press down the "Mode Button" to select the pouch thickness (75mic, 100mic,
125mic and 250mic), the correspondent LED would turn into Red and flash, when it turns
into Green and stays steady, please insert the paper into pouch, and insert the pouch into the
laminator through the lamination entry.
Note:
1. If the room temperature is cold, the warm up time would be a bit longer.
2. The warm up time for thicker pouch would be longer than 75micron pouch.
CLEAR THE JAMMED POUCH
This laminator is designed with an device to clear the jammed pouch. When auto jam release
a misfeed or jam occurs, press down "reverse button", The jammed pouch will be pulled out
automatically.
AUTO STOP
To save precious energy, this machine is designed to be shut off automatically when not be
used over 60 minutes. When the machine shut off automatically, all LEDs turn off. Under this
condition, there's still weak electric current inside, if you do not use this machine in a certain
period, please pull out the plug from the socket-outlet to shut it off completely.
In case machine is shut off automatically, to start machine again, please press "Mode" button
to turned on the machine again.
Specyfikacje produktu
| Marka: | Pavo |
| Kategoria: | System laminowania |
| Model: | AlaskaVigo A3 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Pavo AlaskaVigo A3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje System laminowania Pavo
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
14 Września 2024
Instrukcje System laminowania
- System laminowania Fellowes
- System laminowania Nedis
- System laminowania Marquant
- System laminowania Quigg
- System laminowania Aurora
- System laminowania Genie
- System laminowania Rexel
- System laminowania Olympia
- System laminowania Hama
- System laminowania Tracer
- System laminowania Sencor
- System laminowania Powerfix
- System laminowania Lervia
- System laminowania Q-CONNECT
- System laminowania United Office
- System laminowania Exibel
- System laminowania Ednet
- System laminowania Royal Sovereign
- System laminowania GBC
- System laminowania Peach
- System laminowania Hema
- System laminowania DESQ
- System laminowania Leitz
- System laminowania GFP
Najnowsze instrukcje dla System laminowania
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
7 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024