Instrukcja obsługi Patton SNBX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Patton SNBX (8 stron) w kategorii telefon. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
SmartNode™ Branch eXchange Series
SIP 3CX Based Private
Branch Exchange
Quick Start Guide
ImportantThis is a Class B device and is intended for use in a light industrial
or residential environment. It is not intended nor approved for use in an
industrial environment.
Part Number: 07MSNBX-QS, Rev. B
Revised: June 25, 2014
Sales Office: +1 (301) 975-1000
Technical Support: +1 (301) 975-1007
E-mail: support@patton.com
Web: www.patton.com
2SmartNode Branch eXchange Quick Start Guide
Do not open the device when the power cord is connected.
For systems without a power switch and without an external
power adapter, line voltages are present within the device
when the power cord is connected.
For devices with an external power adapter, the power
adapter shall be a listed Limited Power Source The mains
outlet that is utilized to power the device shall be within 10
feet (3 meters) of the device, shall be easily accessible, and
protected by a circuit breaker in compliance with local regu-
latory requirements.
For AC powered devices, ensure that the power cable used
meets all applicable standards for the country in which it is to
be installed.
For AC powered devices which have 3 conductor power plugs
(L1, L2 & GND or Hot, Neutral & Safety/Protective Ground),
the wall outlet (or socket) must have an earth ground.
For DC powered devices, ensure that the interconnecting
cables are rated for proper voltage, current, anticipated tem-
perature, flammability, and mechanical serviceability.
WAN, LAN & PSTN ports (connections) may have hazardous
voltages present regardless of whether the device is powered
ON or OFF. PSTN relates to interfaces such as telephone
lines, FXS, FXO, DSL, xDSL, T1, E1, ISDN, Voice, etc. These
are known as “hazardous network voltages” and to avoid
electric shock use caution when working near these ports.
When disconnecting cables for these ports, detach the far
end connection first.
Do not work on the device or connect or disconnect cables
during periods of lightning activity.
This device contains no user serviceable parts. This device
can only be repaired by qualified service personnel.
If one has reason to open the chassis or case, then the pre-
cautions mentioned above shall be followed. This includes
both the warnings relating to disconnection of the input
power, and the warnings relating to the disconnection of
WAN, LAN & PSTN ports.
In accordance with the requirements of council directive 2002/
96/EC on Waste of Electrical and Electronic Equipment (WEEE),
ensure that at end-of-life you separate this product from other
waste and scrap and deliver to the WEEE collection system in
your country for recycling.
WARNING
SmartNode Branch eXchange Quick Start Guide 3
1.0 Before you begin
In the box, you will find:
One SmartNode Branch eXchange (SNBX)
One External Power Supply
One RJ45 Ethernet Straight Cable (male-to-male)
One warranty sheet
One packing slip
One SmartNode Branch eXchange Quick Start Guide
To install the SNBX, you will need (not included):
KVM, keyboard, and mouse
or
One External PC
2.0 Connecting to the Power Source
1. Connect the external power supply to the SNBX by inserting the barrel connector
into the DC-IN port, and connect the power adapter to mains power.
2. Verify that the Power button on the front panel is lit (solid green). If the power
button is not lit, press the Power button on the front of the SNBX.
3.0 Connecting the SNBX via KVM
1. Plug a keyboard and mouse into the USB ports on the front panel of the SNBX.
2. Connect a video monitor display into the port labeled DVI/VGA on the rear panel
of the SNBX.

Specyfikacje produktu

Marka: Patton
Kategoria: telefon
Model: SNBX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Patton SNBX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje telefon Patton

Instrukcje telefon

Najnowsze instrukcje dla telefon

Profoon

Profoon PDX-7020 Instrukcja

14 Października 2024
Profoon

Profoon PDX-100 Instrukcja

14 Października 2024
Uniden

Uniden XS 1415 Instrukcja

13 Października 2024
Uniden

Uniden XDECT 6105BTU Instrukcja

10 Października 2024
Yealink

Yealink MP56 E2 Instrukcja

9 Października 2024
Yealink

Yealink MP54 E2 Instrukcja

9 Października 2024
Yealink

Yealink MP58-WH E2 Instrukcja

9 Października 2024
Yealink

Yealink MP52 E2 Instrukcja

9 Października 2024
VXi

VXi D200 Dialpad Instrukcja

9 Października 2024
Lewitt

Lewitt LCT 240 Instrukcja

9 Października 2024