Instrukcja obsługi Paradigm CS-LCR v2


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Paradigm CS-LCR v2 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
3
CS-50R
CS-150
CS-80R
CS-160
CS-LCR
CS-60SQ-SM
CS-60R-SM
CS-60R-30
CS-60R
WHITE, PAINTABLE
High-Strength IRPInjection-
Molded Ribbed Polymer Chassis
solve the flexibility problem and
dramatically reduce resonances and
vibrations behind the wall or ceiling.
Superior Mineral-Filled Poly-
propylene Cones with oversized
magnets. Deliver authentic, detailed
midrange performance with solid
extended bass.
Superior PTDPure-Titanium
Domes with ferro-fluid cooling and
damping deliver extended smooth high-
frequency performance with superb
clarity across a wide listening area.
Full-perimeter bracket design
Unlike typical mounting ears, brackets
cover the full diameter or height and
width of the speaker chassis to effectively
sandwich and strengthen the area around
the mounting hole.
4
BEHIND THE SCENES
Why settle for look-alike in-wall/in-ceiling speakers—those that at first glance look similar, but in the end can’t perform,
when you can get the superior sound of CS Series speakers. Extended high-frequency performance, a detailed and
authentic midrange and full-bandwidth bass bring the high-performance sound of CS Series speakers to any room
in your home. Also ideal for use in offices, restaurants, etc.
SOLO PERFORMERS: CS-60R-SM & CS-60SQ-SM
Two PTDPure-Titanium High-Frequency Domes offset at 30° angles
Dual Voice-Coil Mineral-Filled Polypropylene Bass/Midrange Cone
“SM” (stereo/mono) speakers offer rich pure-fidelity dual-channel L/R sound from a single speaker. Their Dual-
Directional Soundfieldprovides wider-than-normal dispersion making them ideal for use in small rooms less suited
to a stereo pair (Fig.1), or where a single speaker is preferred. In larger spaces, using multiple “SM” speakers
eliminates the sound imbalances that occur with separate stereo speakers as people move around, or are seated closer
to one speaker than the other (Fig. 2). Ideal for use as in-wall/in-ceiling surround and/or rear speakers (Fig. 3).
GUIDED SOUNDFIELDSYSTEM: CS-60R-30
The CS-60R-30’s Guided Soundfieldsystem allows you to guide a wide arc of sound toward a specific area of
the room, much the same way we guide a floodlight to fill an area with light. Drivers sit at a 30° angle from the
ceiling enabling you to adjust the direction of sound (Fig. 4), without compromising the crucial sound dispersion
pattern between drivers, or the interaction between drivers and baffle, thereby preserving sonic integrity. These speakers
are also ideal for use as surround and/or rear speakers. Guiding the sound towards the sides or rear of the room
creates an enveloping, reverberant soundfield (Fig.5) similar to that provided by Paradigm’s ADP
technology.
VC-150 Volume Control
(see the specification pages for full details) Fig. 1
Top view of rooms:
Fig. 2 Fig. 3 Fig. 4 Fig. 5
Fig. 1 Fig. 2 Fig. 3
PLACEMENT
Your high quality home deserves high quality sound!
Fig. 4 Fig. 5
2-driver, 2-way in-ceiling, drivers mounted at 30° relative to
mounting surface, IRPchassis/mounting bracket
2nd-order electro-acoustic at 2.5 kHz
25-mm (1 in) PTDdome
165-mm (6-1/2 in) mineral-filled polypropylene cone
55 Hz (DIN)
±2 dB from 70 Hz – 20 kHz
±2 dB from 70 Hz – 15 kHz
89 dB / 85 dB
15 – 80 watts
50 watts
Compatible with 8 ohms
29.3 cm / 11-1/2 in
12.0 cm / 4-3/4 in
26.3 cm / 10-6/16 in
12 L / 0.42 cu ft
2.4 kg / 5.3 lb each
White, paintable
PB-10R; retrofit included
2-driver, 2-way in-ceiling/in-wall, coaxially mounted high-
frequency driver, IRPchassis/mounting bracket
2nd-order electro-acoustic at 2.5 kHz
25-mm (1 in) PTDdome
210-mm (8 in) mineral-filled polypropylene cone
45 Hz (DIN)
±2 dB from 60 Hz – 20 kHz
±2 dB from 60 Hz – 18 kHz
90 dB / 86 dB
15 – 90 watts
60 watts
Compatible with 8 ohms
26.4 cm / 10-6/16 in
7.6 cm / 3 in
23.2 cm / 9-2/16 in
16 L / 0.56 cu ft
2.0 kg / 4.4 lb each
White, paintable
PB-9R; retrofit included
2-driver, 2-way in-wall/in-ceiling, IRPchassis/
mounting bracket
2nd-order electro-acoustic at 2.5 kHz
19-mm (3/4 in) PTDdome
140-mm (5-1/2 in) mineral-filled polypropylene cone
60 Hz (DIN)
±2 dB from 75 Hz – 20 kHz
±2 dB from 75 Hz – 18 kHz
88 dB / 84 dB
15 – 80 watts
50 watts
Compatible with 8 ohms
25.5 cm x 17.5 cm / 10-1/16 in x 6-14/16 in
5.4 cm / 2-2/16 in
23.2 cm x 15.2 cm / 9-2/16 in x 6 in
6 L / 0.22 cu ft
1.2 kg / 2.5 lb each
White, paintable
PB-6x9; retrofit included
2-driver, 2-way in-wall/in-ceiling, IRPchassis/
mounting bracket
2nd-order electro-acoustic at 2.5 kHz
19-mm (3/4 in) PTDdome
165-mm (6-1/2 in) mineral-filled polypropylene cone
55 Hz (DIN)
±2 dB from 70 Hz – 20 kHz
±2 dB from 70 Hz – 18 kHz
89 dB / 85 dB
15 – 90 watts
60 watts
Compatible with 8 ohms
28.1 cm x 20.0 cm / 11-2/16 in x 7-14/16 in
6.0 cm / 2-6/16 in
25.8 cm x 17.7 cm / 10-2/16 in x 6-15/16 in
12 L / 0.42 cu ft
1.6 kg / 3.5 lb each
White, paintable
PB-7x10; retrofit included
3-driver, 2-way in-wall left/center/right, IRPchassis/
mounting bracket
2nd-order electro-acoustic at 2.5 kHz
19-mm (3/4 in) PTDdome
Two 140-mm (5-1/2 in) mineral-filled polypropylene cones
60 Hz (DIN)
±2 dB from 75 Hz – 20 kHz
±2 dB from 75 Hz – 18 kHz
89 dB / 85 dB
15 – 100 watts
70 watts
Compatible with 8 ohms
23.1 cm x 31.8 cm / 9-2/16 in x 12-1/2 in
6.4 cm / 2-1/2 in
20.8 cm x 29.5 cm / 8-3/16 in x 11-10/16 in
12 L / 0.42 cu ft
2.7 kg / 5.9 lb each
White, paintable
PB-8x12; retrofit included
Design
Crossover
High-Frequency Driver
Bass/Midrange Driver(s)
Low-Frequency Extension*
Frequency Response:
On-Axis
30˚Off-Axis
Sensitivity – Room/Anechoic
Suitable Amplifier Power Range
Maximum Input Power
Impedance
External Dimensions: (D or H x W)
Minimum Mounting Depth**
Cutout Dimensions: (D or H x W)
Minimum Internal Volume Required
Weight (unpacked)
Finish
Pre-Construction Bracket (sold sep.)
CS-50R CS-60R CS-60R-SM CS-60SQ-SM
2-driver, 2-way in-ceiling/in-wall, coaxially mounted
high-frequency driver, IRPchassis/mounting bracket
2nd-order electro-acoustic at 3.0 kHz
19-mm (3/4 in) PTD
dome
140-mm (5-1/2 in) mineral-filled polypropylene cone
60 Hz (DIN)
±2 dB from 75 Hz – 20 kHz
±2 dB from 75 Hz – 18 kHz
88 dB / 84 dB
15 – 70 watts
40 watts
Compatible with 8 ohms
19.4 cm / 7-10/16 in
5.7 cm / 2-1/4 in
16.6 cm / 6-9/16 in
6 L / 0.22 cu ft
1.2 kg / 2.5 lb each
White, paintable
PB-7R; retrofit included
2-driver, 2-way in-ceiling/in-wall, coaxially mounted
high-frequency driver, IRPchassis/mounting bracket
2nd-order electro-acoustic at 3.0 kHz
19-mm (3/4 in) PTDdome
165-mm (6-1/2 in) mineral-filled polypropylene cone
55 Hz (DIN)
±2 dB from 70 Hz – 20 kHz
±2 dB from 70 Hz – 18 kHz
89 dB / 85 dB
15 – 80 watts
50 watts
Compatible with 8 ohms
22.1 cm / 8-3/4 in
6.0 cm / 2-6/16 in
19.3 cm / 7-10/16 in
12 L / 0.42 cu ft
1.6 kg / 3.5 lb each
White, paintable
PB-8R; retrofit included
Single speaker system with stereo L/R inputs, 3-driver,
2 x 2-way in-ceiling/in-wall, coaxially mounted high-
frequency drivers, IRP chassis/mounting bracket
Two 2nd-order electro-acoustic at 3.0 kHz
Two 19-mm (3/4 in) PTDdomes
Dual voice-coil, 165-mm (6-1/2 in) mineral-filled
polypropylene cone
52 Hz (DIN)
±2 dB from 70 Hz – 20 kHz
±2 dB from 70 Hz – 15 kHz
89 dB / 85 dB
15 – 80 watts Mono;
15 – 40 watts/channel Stereo Input
50 watts
Compatible with 4 ohms Mono;
8 ohms/channel Stereo Input
22.1 cm / 8-3/4 in
6.0 cm / 2-6/16 in
19.3 cm / 7-10/16 in
12 L / 0.42 cu ft
1.6 kg / 3.5 lb each
White, paintable
PB-8R; retrofit included
Single speaker system with stereo L/R inputs, 3-driver,
2 x 2-way in-wall/in-ceiling, coaxially mounted high-
frequency drivers, IRP chassis/mounting bracket
Two 2nd-order electro-acoustic at 3.0 kHz
Two 19-mm (3/4 in) PTDdomes
Dual voice-coil, 165-mm (6-1/2 in) mineral-filled
polypropylene cone
52 Hz (DIN)
±2 dB from 70 Hz – 20 kHz
±2 dB from 70 Hz – 15 kHz
89 dB / 85 dB
15 – 80 watts Mono;
15 – 40 watts/channel Stereo Input
50 watts
Compatible with 4 ohms Mono;
8 ohms/channel Stereo Input
20.0 cm x 20.0 cm / 7-14/16 in x 7-14/16 in
7.1 cm / 2-3/4 in
17.8 cm x 17.8 cm / 7 in x 7 in
12 L / 0.42 cu ft
1.6 kg / 3.5 lb each
White, paintable
PB-7x7; retrofit included
Design
Crossover(s)
High-Frequency Driver(s)
Bass/Midrange Driver
Low-Frequency Extension*
Frequency Response:
On-Axis
30˚ Off-Axis
Sensitivity – Room/Anechoic
Suitable Amplifier Power Range
Maximum Input Power
Impedance
External Dimensions: (D or H x W)
Minimum Mounting Depth**
Cutout Dimensions: (D or H x W)
Minimum Internal Volume Required
Weight (unpacked)
Finish
Pre-Construction Bracket (sold sep.)
CS Series
CS-60R-30 |GUIDED SOUNDFIELD SYSTEM CS-80R CS-150 CS-160 CS-LCR


Specyfikacje produktu

Marka: Paradigm
Kategoria: Niesklasyfikowane
Model: CS-LCR v2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Paradigm CS-LCR v2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Paradigm

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024