Instrukcja obsługi Panduit TGRAEI

Panduit kabel do komputerów i urządzeń peryferyjnych TGRAEI

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panduit TGRAEI (3 stron) w kategorii kabel do komputerów i urządzeń peryferyjnych. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
www.pand uit.com
Material: Rigid PVC
Flammability: UL94V-0; FT4
Voltage rating: UL-5A 600VAC; CSA C22.2 No. 62.1-03 600V
Approvals: UL Listed 95425 (raceway); UL Listed E116129 (fittings); CE Listed
NEC: Article 388
Color: Off-White (IW) and Electrical Ivory (EI); International Gray (IG)
available in 8' lengths only.
CSI spec form: LP-CSISPEC-TG70-1
TG non-metallic multi-channel surface raceway shall be used to route,
protect and conceal data, voice, video, fiber optic and power cabling.
The raceway shall be listed as suitable for use in applications up to 600
volts between conductors by Underwriters Laboratories, Inc. per
standard 5A, and by Canadian Standards Association, Inc. per 22.2
no. 62.1-03, when screw secured and installed per instructions. A full
complement of fittings with a 40mm (1.6") minimum bend radius
compliant with TIA/EIA-568-B must be available as well as device
brackets and internal junction boxes to install a variety of
communication and electrical devices. Divider walls must be available to
form separate channels in the multi-channel raceway. Panduit “snap-on”
faceplates for data and power terminations shall be available. TG
raceway will be manufactured from impact-resistant material with
flammability rating of V-0. TG raceway must be tamper resistant, yet
allow access for moves, adds and changes. TG raceway finish shall
be pure color and will resist scratches and dents and will not peel or
corrode. TG raceway shall be available in three standard colors
and shall be optimized for use with the Panduit® tPan-Ne ®
Communication System.
Large cable capacity Provides maximum cable routing space which allows for a large
number of cables to be routed within a single raceway channel
40mm (1.6) bend radius Increased bend radius control to satisfy the needs and
control fittings maximizes the headroom of larger diameter high
performance copper cable and fiber optic cabling
Snap-on faceplates Faceplates snap directly onto the raceway base; cabling
can be quickly accessed by removing only the faceplate,
which requires less labor and lowers the cost
of maintenance
Channel has a 70mm opening Accepts any manufacturer’s NEMA standard snap-on or
screw-on power or communication faceplates
Non-metallic construction Lightweight, reducing installer fatigue; solid color through
out profile will not chip, peel, rust, corrode, or scratch;
easy to cut reducing the need for special cutting devices;
high impact resistance; durable
Designer profile Aesthetically pleasing and matches a wide variety
of decors
Available in three standard colors Matches a variety of colors for various applications
of decors
Pan-Way ® TG-70 Surface Raceway is a
multi-channel channel raceway which provides
a solution for routing low voltage, fiber optic
and/or power cabling when maximum cable
capacity is required. TG-70 Raceway can
mount NEMA standard screw-on faceplates
or superior Pan-Way® Snap-On Faceplates
directly to the channel.
TG-70 Raceway Fittings
and Accessories
Base coupler: TG70BCIW-X
Cover coupler: T70CCIW-X
Adjustable
outside
corner fitting: TGOCIW
Adjustable
Inside
corner fitting: TGICIW
Non-adjustable
inside corner
fitting: TGSICIW
Non-adjustable
outside corner
fitting: TGSOCIW
Right angle
fitting: TGRAIW
End cap fitting: TGECIW
Tee fitting: TGTIW
Tee divider
insert: TGTD
Transition
fitting: TGTRIW
Wire retainer: TG70WR-X
Device bracket: T70DB-X
Three sided
hanging box: TG70HB3-X
GFCI three sided
hanging box: TG70HB3GFCI-X
Backfeed fitting: TGBFIW
Backfeed fitting
insert: TGBFI
Entrance end
fitting: TGEEIW
Standard
faceplate
bracket: T70SDB-X
Fiberspool
bracket
(2 halves): TGFSB
For standard colors other than Off White (IW),
replace IW in part number with EI (Electrical
Ivory) or IG (International Gray). International
Gray available in 8' lengths only.
Pan-Way ® TG-70 Raceway
Raceway Base and Cover
(packaged together)
8 feet: TG70IW8
10 feet: TG70IW10
Replacement Cover
8 feet: T70CIW8
10 feet: T70CIW10
Divider Wall
8 feet: TGDW8
10 feet: TGDW10
®
®
5.32”
[135.0 mm]
2.68”
[68.0 mm]
A=10.85in 2
[7005mm
2]
T70C (Replacement Cover)TG70
Raceway
Type and
Configuration
Fill
Area
(in²)
Electrical Cables Data Grade Cables Coax Cables
Fiber Optic
Cable
14
AWG
12
AWG
10
AWG 24 AWG 24 AWG 24 AWG 24 AWG 24 AWG 24 AWG 24 AWG
RG6 RG59/u 2 StrandTHHN/THWN/T90
Cat. 5e –
Plenum
Cat. 5e –
Riser Cat. 6 Cat. 6A Cat. 6A Cat. 6A Cat. 6A (SD)
0.111 0.130 0.164 DIA = 0.193 DIA = 0.225 DIA = 0.240 DIA = 0.289 DIA = 0.300 DIA = 0.330 DIA = 0.240 DIA = 0.275 DIA = 0.242 DIA = 0.175
FILL FILL FILL FILL FILL FILL FILL FILL FILL FILL FILL
MAX MAX MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX
(UL Temp Rise Test) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%)
TG70: Data
Only using
Screw on
Faceplates
and Devices
10.09 ** ** ** 137 206 101 152 89 133 61 92 57 85 47 70 89 133 67 101 87 131 167 251
TG70: Data
Only using
Snap-on
Faceplates
and Wire
Retainer
10.68 ** ** ** 146 219 107 161 94 141 65 97 60 90 49 74 94 141 71 107 92 139 177 266
TG70: Wire
Retainer
without
Devices
10.85 40 40 38 148 222 109 163 95 143 66 99 61 92 50 76 95 143 73 109 94 141 180 270
TG70: Divided
Power and
Data (A)
3.16 28 28 26 ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **
TG70: Divided
Power and
Data (B)
7.20 ** ** ** 98 147 72 108 63 95 43 65 40 61 33 50 63 95 48 72 62 93 119 179
TG70: Power
and Data
using
Snap-On
Faceplates
and 3 Sided
Power Box (A)
3.08 28 28 26 ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **
TG70: Power
and Data
using
Snap-On
Faceplates
and 3 Sided
Power Box (B)
5.58 ** ** ** 76 114 56 84 49 74 34 51 31 47 26 39 49 74 37 56 48 72 92 139
Visit us at www.panduit.com
®
TGRA TGEC TGT TGDW
TGTR
TG70HB3-X
TG70WR-X T70DB-X
TGTD TG70HB3GFCI-X
TG70BC-X T70CC-X TG0C TGIC TGSICTGSOC
TGFSBTGEE
TGBF
TGBFI T70SDB-X

Specyfikacje produktu

Marka: Panduit
Kategoria: kabel do komputerów i urządzeń peryferyjnych
Model: TGRAEI

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panduit TGRAEI, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kabel do komputerów i urządzeń peryferyjnych Panduit

Panduit

Panduit TGRAEI Instrukcja

14 Września 2024
Panduit

Panduit CFX5IW-X Instrukcja

18 Czerwca 2024
Panduit

Panduit FXTHL5NLDSNM013 Instrukcja

27 Maja 2024
Panduit

Panduit FXTRL7N7NANM040 Instrukcja

26 Maja 2024
Panduit

Panduit FXTRL8NUFSNM029 Instrukcja

25 Maja 2024
Panduit

Panduit FXTHL6NLSSNM015 Instrukcja

24 Maja 2024

Instrukcje kabel do komputerów i urządzeń peryferyjnych

Najnowsze instrukcje dla kabel do komputerów i urządzeń peryferyjnych

ICC

ICC MSLOR90 Instrukcja

28 Września 2024
ICC

ICC MSLST05 Instrukcja

28 Września 2024
ICC

ICC MSLCRPK Instrukcja

28 Września 2024
ICC

ICC ICRW11JCIV Instrukcja

28 Września 2024
ICC

ICC ICRW12JCIV Instrukcja

28 Września 2024
ICC

ICC ICRW12OBIV Instrukcja

28 Września 2024
ICC

ICC ICRW12OCIV Instrukcja

28 Września 2024
ICC

ICC ICRW13CEWH Instrukcja

28 Września 2024
ICC

ICC ICRW33CMWH Instrukcja

28 Września 2024
ICC

ICC ICRWR11SIV Instrukcja

28 Września 2024