Instrukcja obsługi Panduit FSPCVR

Panduit Maszyna do polerowania FSPCVR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panduit FSPCVR (4 stron) w kategorii Maszyna do polerowania. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Optical fiber cleaver

FSPCVR

1. General

This product has been designed and manufactured to assure personal safety.

Improper use can result in bodily injury and serious damage to the fiber cleaver.

Please read and ob e all serv warnings instructions given in this operation manual.

1. Do not use the cleaver in io condensat n or wet e Dnvironments. oi o ng s can cause

fire, ma n or elf iounct lectric shock.

2. Ple id ioase observ these e important cons erat ns when dealing thwi lithium

batteries for the cleave counter:

∙Do not charge, short circuit, dis leassemb , heat p throw u and the battery in ir f e.

Do not mix the batteries with other metallic objects and different types of

batteries.

∙When disposing o atf or storin itg the batter wy, rap it w h tape for insul ion.

∙If you are not going to use t che leav long er f aor time, remove the battery from

the clea r and wrve ap it around with a tape for ins atul ion.

∙Keep away f hrom fain nts. If infant appens to swal the low battery, consult with a

doctor.

∙Make sure the polarities are correctly connected.

1. Do Donot th as t touch the blade wi bare hands i is e sxtremely harp. ing so can

cause bodily injury. A chipped blade will degrade cleaving performance. Take

care not to hit the blade against anything.

2. Opt ndic ibal f er a g flass iber offcuts tinyare and harp e sxtremely . Handle it w h

great care. Take care not to prick your finger. Wear afety glasses at s all times

during at cle inav g oper ion for protecti ass fibers. on from gl

3. Do not use the cleaver which has a crack or damage. Doing so can cause bodily

injury.

4. . Do not impact the cleaver by hit The n c avle er is a precisio tool ting or dropping.

Doing so can cause bodily in lejury and loss of c aving performance.

5. After se u please empty the fiber bin and then s ctore the leaver in the case. There

is a p tossibility hat fiber offcuts could spill out g of t dhe bin urin transportation if

they remain in the bin.

6. Do not push the slider while the stopper wered. lever is lo

7. If working in an elevated p sosition, uch as on a ladder, take safety measures like

us g the in ing p to prea stra vent dropp cleaver.

8. Dis is ixpose glass and batteries n of fiber offcuts i proper d posal bins. Do n mot

them with other waste.

9. Do ornot disassemble lubricate any parts of the cleaver. Doing so can cause

damage to the cleaver.

10.When pushing the slider, make sure that the lid is opened. P tushing he slider with

the lid closed can cause damage to the cleaver. When lid isthe closed ngduri

storage, do not apply excess ive force to the slider.

*With regards the names of the cleaver parts, please refer to “2. Structure”.

11.Do not use and st r in h h temper ngore the cleave ig ature and high humidity. Doi

so can cause damage to the cleaver.

12.Be sure to lock the lid before storage and transportation.

13.Store the cleaver g case after use. in the carryin

Warning

Caution

Specification

Standard package

Part name Part No. Unit Qty

Optical fiber clea r ve FSPCVR pc 1

Sing dapter for cord *1le fiber a AP-FC7(P) pc 1

Single fiber a 0.25mmdapter for Φ/Φ0.9mm *2 AP-FC7 pc 1

Carrying case pcCC-8RSH 1

Operation manual *3

OME1326009-03

pc 1

Cl ng brusheani － pc 1

Hexagonal wrench － pc 1

Strap － pc 1

*1 Pre-attached t clo the cleaver in uded in the packag (w M2x4 screw) e ith

*2 Included (with M2x6 screw)

*3 The latest vers . ion is provided

Optional accessories / Consumables

Part name Part No. Unit Qty

Replacement blade FCP-20BL(7R) pc 1

Sing dapter for cord *1le fiber a AP-FC7(P) pc 1

Single fiber a 0.25mmdapter for Φ/Φ0.9mm *2 AP-FC7 pc 1

Fiber bin *2 TR-FC8R set 1

Carrying case pcCC-8RSH 1

Co type thin Li ium battery CR1220 pc 1

*1 Included as a standard package emit . (The adapter comes with M2x4 screw to secure to the

cleaver.)

*2 Included as a standard (Thepackag em. e it adapter comes with M2x6 screw to secure to the

cleaver.)

2. Structure

(1)

(13)

(5)

(2)

(7)

(3)

(4)

(6)

(12)

(8)

(10)

(11)

(9)

Warnin

Caution

Denotes eriousimportant onsi ousafety c de thrations at c ld in result s

in igjury if nored.

Denotes important safety consi ons derati that c rould esult in injury

or damage to the cleaver.

(9)Counter

Disp ys cla leave count.

(10)Stopper rleve

Moves the slider.

(11)Blade

Scratches optical fiber.

(12)Anvil

Is made of rubber and tc becleaves a scra hed fi r.

(13)Single fiber adapter for cord

A guid ine for placement of s gle fiber.

Operation manual

IMPORTANT SAFETY PRECAUTIONS

Item

FSPCVR

Applic le ibab f er

Material Silica glass

Cl 5 adding diameter Φ12 ｍ

Fiber count Single

Coatin 0.g diameter *1 Φ0.25mm, Φ9mm

Cord r *2 diamete Φ1.6mm, Φ3.0mm

Φ0.9mm coat g in length Φ1.6mm Cord : 14mm

Φ3.0mm Cord : 14mm

Cleave length *3 7.0～7.5mm

Automatic blade rotation*4 Available it (Sw chable to Fixed)

Cleaver operation

counter

Built-in

DC power supply Co m battery in type Lithiu CR1220

Cl ounts per eave c

battery *5 Approx. 60,000 cou s nt

Lid openin leg angl chabe Swit (Wi de/Narrow)

Size *6 mm58(W) x 98(D) x 49(H)

Weight Approx. 260ｇ

Blade life*7 60,000 fi bers (2,500 fibers x 24 positions)

Operating condition

Temp. 50 5%-10°C~ °C/Humidit owy RH bel 9 (non-condensing)

Storage condition

Temp. 80 5%-40°C~ °C/Humidit owy RH bel 9 (non-condensing)

*1 thWi AP-FC7 attached.

*2 With AP-FC7(P) attached.

*3 Design value.

*4 24 positions per rotation.

*5 Based on in-house standards, this number may be achievable at room temperature wi anasonth P ic CR

1220 battery. It varies depending on the operational environments and batteries. Even if t b ihe attery s

repl the aced, cleave count is not reset and up to 99,999 counts can be displayed. It can be reset

anyt ogged.ime. If th cl ount i ce eave c s reset, the total le isave count l

*6 A project n region is exio cluded.

*7 B rylade lif ise not guaranteed. It may va depending on the operat ronment.ional envi

*8 The FSPCVR works on a battery. Pl u tease se he cleav ng and storier in a cool place. Usi ng the cleaver

in low temperature or high temperature and h hig humidity m cay ause he t b cattery apacity to decrease

and the cleave count will be less.

(1)Lid

Fiber is cleaved and fiber offcut is col ctedle

along with openi ng of the lid.ng and closi

(2)Locking lever

Keeps the clid losed.

(3)Blade rotation switching lever

Changes blade rotation to Automatic or Fixed.

(4)Lid opening angle switching lever

Changes lid opening angle.

(5)Fiber bin

Collects fib . er offcuts

(6)Strap hook

Secures the strap.

(7)Slider

Mo ves the blade.

(8)Clamp

Is fi made of rubber and holds optical ber.

Slider

Do not touch the blade.

Caution

3.0 1.6

∙The fiber b oin nly collects a specified cleave length. If the cleave length is not

opti ct the offcut.mum, the collector ol may not c le

Optimum cleave length for o cut collectober r

Bare f cliber eave length 23~30mm

7mm

Blade

Fiber Coating

(4) Close the lid. The slider is automatically pushed The back. fi ber is

cleaved.

Do not place your finger where t s b T she lider is pushed ack. he lider may hit the

finger, resulting in an injury.

(2) Push the slider fully until it’s locked.

(3) Position the edge of the fiber coating at “7 CLEAVE” and hold the fiber

coating with your finger.

(5) Open the lid. The fiber offcut is automatically

collected. The cle isaving process completed.

Remove the fiber from holder.

Caution

3. Operating procedures

(1) Slide both locking levers to open the lid.

While pushing down t l lhe id ightly, hold both locking levers and slide them

together to the front at the same time until the r ied ndicator is not visible

at all.

Locking lever (located on Left & t)Righ

Step 1

Lock indicator (red)

Slidin lo ing one ck g lever does not open the lid smoothly.

Caution

If t lhe id is closed with one lo in leck g ver or t lhe ocking levers are not slid fully,

the lid entally open dur g storage or twill accid in ransport, potentially resul ngti

in damage.

Caution

The red in isdicator not

comp tely vle isible.

(6) After using the cleaver, slide back the locking tolevers lock the lid.

While closed,keeping lid the hold both locking levers and slide them to

the back u t l lntil he ocking evers do move. not Make sure the red indicator

is completely visible.

Locking lever (located on Left & Right)

Step 2

Step 1

Lock indicator (red)

4. Functions

Lid opening angle change

The opening angle of the lid can be changed depending

on how y tou use he cleaver. When y t cou use he leaver

in one hand or cleave single fiber, it’s beneficial to

“Open the lid in a small angle”. When you e use th

cleaver on a c work bench, leave ribbon fiber or clean

the cleaver, it’s effective to “Open the lid in a large

angle”. The default factory is “a small angle”. Before

sliding the lid opening angle switching lever, make sure

the lid is fully closed.

Lid g openin angle

sw chit ing lever

If you stop the halever lfway, the lid does not open properly, resulting in

damage to the cleaver.

Slide the lid openi ngle mark of the ng a switching lever to the left until 

le igns with ver al  mark of the cl with aeaver clicking sound.

Open the lid in a small angle (Approx. 30°) (Factory default)

(Approx. 30°)

Slide the lid opening angle switching lever to the right until mark of the

le igns with ver al  mark of the cl with aeaver clicking sound.

Open t l ihe id n a large angle (Approx. 70°)

(Approx. 70°)

Caution

Automatic blade rotation

The blade rotation switching lever changes

the rotationblade to or”Automatic (R)”

“Fixed ( W0)”. ith “Automatic ( tR)”, he blade

automatically rotates by approx. 15° on

each cleave.

With “Fixed (0)”, the blade does not rotate.

If the blade is partly chipped but you wish

to use it, “Fixed (0)” is recommended.

The factory default is “ matic”Auto .

Blade rotation switching lever

Turn the blade rotation switching lever with a slotted

screwdriver until the slit of the lever comes to “R”.

The lever can rotate in both directions.

Ensure that the blade automatically rotates on each

cleave.

The slit shoul come to “Rd ”.

Automatic rotation (R)

Turn he t lever until t she li comes t to “R” or “0” completely with a clicking sound. If

you hestop t lever halfway, t b r nhe lade otation will ot work properly, resulting in

damage to the cleaver.

Turn the blade rotation switching lever with a slotted

screwdriver until the slit of the lever comes to “0”.

Ensure that the blade does not rotate.

Fixed (0)

Caution

The slit should come to “0”.

1.6

3.0

With use of the nglesi fiber adapter,

you can cleave single fiber to 7mm

cleave length.

Fitting single fiber adapter to the cleaver

0.9 0.25

<AP-FC7>

Caution

Make sure single adapter the fiber is secured with a

correct size screw. Using an incorrect size screw can

cause the adapter not to be secured properly or give

damage to the counter.

AP-FC7(P) : M2x4 screw / AP-FC7 : M2x6 screw

<AP-FC7(P)>

Step 2

Single f aiber dapter

Fiber holder receptacle

Reference surface

How to f sit ingle fiber adapter

Place the single f a iiber dapter n the fiber holder receptacle. While pushing

the agai the reference surface,adapter nst secure it by tightening the

provided . ure screw Make s the adapter is perpendicular to the reference

surface.

∙Make sure the s s w single fiber adapter is ecured ith correcta ize

screw. U asing n incorrect ize s screw can cause the adapter not to

be secured properly or give damage to the counter.

（AP-FC7(P): M2x4 screw / AP-FC7: M2x6 screw)

∙Make sure the sin isgle fiber adapter perpendicular to the reference

surface. If the adapter is angled, fiber will not be cleaved properl ory

cleave angle will be poor.

Caution

Cleave operation counter

The FSPCVR incorpo anrates LCD which displays the cleave count. The

cleaver automatically counts the number of cleaves on each cleave. It

can display t ave cohe cle unt and total cleave count.

Counter

Feature

Di ofsplay cleave count and total

cl eave count

Reset of cleave count

DC power supply Co thin type Li ium battery CR1220

(commercial item)

Cleave counts

Per battery Approx. 60,000 counts

Displayable

cl eave count

Cl count: up to 99,999 countseave

Tota count: 999,999 counts l cleave

∙The cleave count and total cleave count a not reset after a battery is replaced. re

∙The total cleave count cannot be reset.

∙A b wattery hich is in lestal d in the c uleaver pon shipment is intended f cor hecking of

counter oper ase repl one after ation. Ple ace it with a new operation checking.

∙The cleaver c can ount the number of c oleaves nly when a fiber holder or single fiber

adapter is fitted to the cleaver.

∙Based on our in ie house standards the above number may be ach vable at a room

temperature with Panasonic CR1220 battery. It varies depending on the

oper enational vironments a bnd atteries. If g nothin or “Lo he b tat” is is d played, or

displayed number is disappearing, the battery should be replaced.

∙If f the number o cl s the eave exceeds displayable cleave count, the cleave count

and total cleave count will return to “0”.

∙Do not appl tey ex e cessiv impact to the coun r. Doi o ng s can counter cause the to

malfunction or become faulty.

∙Do not use the cleaver in the rain, in t we condition caused dew condensati by on,

and in t hoo much umid, dusty and oily p Dlaces. oing so can cause fire, malfunction

and electr .ic shock

Caution

Slider

Cl ed.)eave count (“C” is display

<Cleave count> <Total e count> cleav <Low battery>

The counter automatically counts the n cumber of leav eaches on cleave.

With regards how to use cleavethe r, please refer to “3. Operating

procedures”. The counter does not count without a fi holderber or single

fiber adapter fitted.

(1) Details of display

The cleaver displays “Cleave count” and “Total cleave count”. “Cleave

count” is displayed as a standard and “Total cleave count” can be

displayed necessaryas .

Even if “Cleave count” is reset, “Total cleave count” is not reset.

If the battery capacity is getting lo “Lo baw, t” appears.

(2) Timing of counting

A following cleave i t s m bs counted when he lider is oved ack closing of

the lid. T che leave count is displayed for econds. approx. 4 s If a fiber

holder or single fiber adapter is not to fitted the cleaver, the current

cleave count is di d and the cosplaye unt do es not increase.

Counter di lay sp

The SW button is located the ith on the f bottom o cleaver. W a hexagonal

wrench utton ( e t bAllen key) tc, push he SW ntil s l utraight down ightly it

clicks. Every time the SW is pushed, the display switches to “Cleave

count” and “Total cleave count” alternately and shows for approx. 8

seconds.

Checking cleave counts and t al cleave countsot

Caution

∙Do not push t bhe utton SW too hard. Doing so c c dan ause amage to t She W.

∙The y standard displa is “Cleave yo count”. If u push it again, t d whe isplay ill

switch to “Total cleave count”.

Button SW

“Cleave count” can be reset by following these steps:

∙Do not push t b t hhe utton SW oo ard. D soing o can cause damage to the SW.

∙If you buttonpress the SW while noth g in or “Total cleave count” is

displa count” will not be reset.ye ved, ”Clea

∙”Total cleave count” cannot be reset.

(1) With a hexagonal wrench (Allen key)

etc, push the button SW down to

display un“Cleave co t”.

Resetting cleave count

Button SW

Caution

(2) While keeping “Cleave count” displayed, press and

hold down the button SW ore f mor than 5 seconds.

“Cleave count” will be reset. (return to 0).

Replacing the battery

Battery cover

Screw

If nothing or “ b d oLo at” is isplayed n the LCD, or the displayed number is

disappearing, batterthe y needs replacing. A commercial item can be

used as a new replacement battery. (Part No.: CR1220)

(1) Loosen the 2 screws with the provided hexa enchgona wrl (Allen

key). Remove the fiber holder (Rreceptacle. emove th lee sing fiber

adapter prior to this step.)

(2) Hold the battery cove Pull it to the front to remove.r.

(3) ingers or nails. Remove the battery using your f

(4) With the positive (+) of a new battery faced up,

install it in the cleaver. Push the battery until it’s

lock he button SW once ed. Push t and make sure

“Cleave count” is displayed.

(5) Push the battery cover all the way to the back.

(6) While pushing the fiber holder receptacle against

the main bod screws. y, re-tighten the 2

∙Do not apply excessive force to the counter when replac g the batteryin .

∙”Cleave count” and “Total cleave count” are not r aeset fter a battery is replaced.

∙Dispose of old batteries in accordance wit reguh lo l ca lations.

∙Take care n tot o lose the battery cover. Always f t cit it to he leaver. If the battery

cover is not fitted, a battery will be removed by strong impact, resulting in

malfunct n of the slideio r.

Caution

Battery

The positive (+) should be faced up.

Fiber holder receptacle

FSPCVR

Specyfikacje produktu

Marka:	Panduit
Kategoria:	Maszyna do polerowania
Model:	FSPCVR

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panduit FSPCVR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do polerowania Panduit

Panduit FSPCVR Instrukcja

13 Września 2024

Instrukcje Maszyna do polerowania

Najnowsze instrukcje dla Maszyna do polerowania

Black & Decker G650 Instrukcja

8 Października 2024

Worx WX856.9 Instrukcja

5 Października 2024

Robust RB-PO 110 Instrukcja

3 Października 2024

RIKON 31-200 Instrukcja

2 Października 2024

Einhell Bavaria Bavaria BPM 500 Instrukcja

30 Września 2024

Makita PO5000C Instrukcja

26 Września 2024

Einhell BT-PO 1100/1 E Instrukcja

25 Września 2024

HiKOKI SP18SB Instrukcja

24 Września 2024

Full Boar FBDWS-6100U Instrukcja

21 Września 2024

Ultimate Speed UPM 120 A1 Instrukcja

20 Września 2024