Instrukcja obsługi PAC NU-CTS2

PAC Niesklasyfikowane NU-CTS2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PAC NU-CTS2 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Pacic Accessory Corporation - Santa Ana, CA 92705
techsupport@pac-audio.com • Voice: 866-931-8021 • Fax: 714-835-3233 • www.pac-audio.com
04-02-12
NU-CTS2
Cadillac CTS
Navigation Unlock
Integration Interface
Installation: Disconnect the black 44-pin main harness from the back of the radio (see g. A) Plug the male connector on the NU-CTS2
harness into the 44-pin port on the back of the radio. Connect the factory 44-pin harness into the female connector on the NU-CTS2 harness.
Plug the Black micro-t 24-pin connector on the NU-CTS2 harness into the NU-CTS2.
2008-2009 Vehicles Only: Locate the vehicles VSS wire in pin 20 of the gray 20-pin plug on the back of the radio (see g. A & B). This wire will
need to be cut then connected as follows: The green/black wire from the NU-CTS2 should be connected to the radio/plug side of the VSS wire
and the green/white wire from the NU-CTS2 should be connected to the vehicle side of the VSS wire.
The NU-CTS2 is a Navigation Unlock integration interface that allows the factory navigation features of
your Cadillac CTS radio or the reverse camera to be used by the passenger at anytime.
Main 44-pin Plug Gray 20-pin Plug
Installation
Cadillac CTS Controls
Press & hold to
enable/disable
Navigation Unlock
1. Press & Hold the
Source Button
2. Information Center
Displays: Confirm
Safe Use
3. Press the Source
Button Again to
Confirm
4. Repeat Step 1
to De-Activate
Activating the Navigation Unlock
Cadillac CTS: Press and hold the “Source” button on the steering wheel controls (SWC) for two seconds to activate the NU-CTS2. You will hear
one chime and the driver information center on the instrument cluster will display “Conrm Safe Use”. Press the “Source” button on the SWC
again to acknowledge “safe use”, agreeing that use will be performed only by the passenger whenever the vehicle is in
motion, and activate the NU-CTS2. To de-activate the NU-CTS2 simply press and hold the “Source” button on the SWC until two chimes are
heard. The NU-CTS2 text will not be displayed when the OnStar Turn-by-Turn Navigation is being used.PLEASE NOTE:
Cadillac CTS-V: Make sure that both of the mirror control lights are off on the driver door. Press the Up button on the mirror controls to activate
the NU-CTS2. You will hear one chime and the driver information center on the instrument cluster will display “Conrm Safe Use”. Press the
Up button on the mirror controls again to acknowledge “safe use”, agreeing that use will be performed only by the passenger
whenever the vehicle is in motion, and activate the NU-CTS2. To de-activate the NU-CTS2 simply press the Up button on the mirror
control. The NU-CTS2 text will not be displayed when the OnStar Turn-by-Turn Navigation is being used.PLEASE NOTE:
WARNING: In order to avoid distraction, which could lead to an accident, the driver should never utilize systems unlocked by the NU-CTS2 when the
vehicle is in motion. Even when operated by the passenger, the vehicle driver should maintain their attention on the road at all times.
Operation
Pin 20
Cadillac CTS-V Controls
Press Once to
Enable/Disable
Navigation Unlock
Make Sure the Control
Lights Are O.
1. Turn o all
mirror controls
2. Press the
Up Button
2. Information Center
Displays: Confirm
Safe Use
3. Press the Up
Button Again to
Confirm
4. Repeat Step 2
to De-Activate
Pacic Accessory Corporation - Santa Ana, CA 92705
techsupport@pac-audio.com • Voice: 866-931-8021 • Fax: 714-835-3233 • www.pac-audio.com
04-02-12
DISCLAIMER: Under no circumstances shall the manufacture or the distributors of the NU-CTS2 be held liable for claims of any loss or damage,
consequential, direct or indirect, arising from the sale, installation, or use of the NU-CTS2. The manufacture and its distributors will not, nor will they
authorize any representative or any other individual, to assume obligation or liability in relation to the NU-CTS2 other than its replacement.
AGREEMENT: End user agrees to use this product in compliance with the instructions and terms of use above and with all State and Federal
laws. PAC provides instructions and safety warnings with respect to this product and disclaims all liability for any use not in conformity with those
instructions or other misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This
product is intended for off-road use and passenger use only.
Activating the Reverse Camera Unlock
Activate the navigation unlock using the SWC. Make sure that both control lights
on the rearview mirror controls on the driver door are off and not controlling either
mirror. Press down on the control pad, the rearview camera image will now display
on the navigation screen.
WARNING: In order to avoid distraction, which could lead to an accident,
the driver should never utilize systems unlocked by the NU-CTS2 when the
vehicle is in motion. Even when operated by the passenger, the vehicle
driver should maintain their attention on the road at all times.
Press Once to
Activate Reverse
Camera
Make Sure the Control
Lights Are O.
Activating the Reverse Camera
1. Turn o all
mirror controls
2. Enable Navigation
Unlock Through
the SWC
3. Press Down Once
to Enable Reverse
Camera
4. Repeat Step 3 to
De-Activate
Operation (cont.)

Specyfikacje produktu

Marka: PAC
Kategoria: Niesklasyfikowane
Model: NU-CTS2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z PAC NU-CTS2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane PAC

PAC

PAC RP4-GM31 Instrukcja

8 Października 2024
PAC

PAC NU-GM51 Instrukcja

8 Października 2024
PAC

PAC NAV-1129 Instrukcja

8 Października 2024
PAC

PAC LP7-2R Instrukcja

8 Października 2024
PAC

PAC LP7-4 Instrukcja

8 Października 2024
PAC

PAC GMK367B Instrukcja

8 Października 2024
PAC

PAC CP1-FRD1 Instrukcja

8 Października 2024
PAC

PAC C2A-CHY5 Instrukcja

8 Października 2024
PAC

PAC NU-GM3 Instrukcja

8 Października 2024
PAC

PAC CP1-TSL1 Instrukcja

8 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024