Instrukcja obsługi PAC NDK748GB


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PAC NDK748GB (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
©2016 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 10/16 PRINT Ver. 10/16
NDK748GB Mounting Kit
VEHICLE APPLICATION
Nissan
2013-17 SENTRA
iNDK748GB
www.aampglobal.com www.aius.net
2500 East Francis Street Ontario, CA 91761, U.S.A.
Sales: (800) 477-2267
Intl: (727) 572-9255
Support: 888-228-5560
Single ISO Mounting Applications
DASH DISASSEMBLY & RADIO REMOVAL
1. With a soft tool loosen the dash panel surrounding the radio. Remove.
See Photo below.
2. Remove (4) Phillips screws securing the radio brackets to the sub dash.
3. Remove radio and unplug all harnesses and antenna connections.
KIT ASSEMBLY INSTRUCTIONS
Note: DO NOT snap metal clips to mainframe until you are at step 5.
1. Insert pocket into lower section of the NDK748GB brackets. See g A
2. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
3. Slide radio forward or backward for desired look and tighten screws.
4. Test t kit/radio by making sure the main frame of the NDK748GB aligns correctly and
does not leave any gaps when installed. If everything looks correct go to step #5.
If not, go back to step # 3.
5. Attach the 4 metal clips supplied to the mainframe See Photo above. Snap main
frame to the dash pressing rmly on the bottom right and left, and then the top right
and left. Suggested…Attach a rear support bracket to the rear of the new radio and
adjust as necessary to support the weight of the radio.
2 3
Figure B
Double DIN Mounting Applications
KIT ASSEMBLY INSTRUCTIONS
Note: DO NOT snap metal clips to mainframe until you are at step 4.
1. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
2. Slide radio forward or backward for desired look and tighten screws.
3. Test t kit/radio by making sure the main frame of the NDK748GB aligns correctly
and does not leave any gaps when installed. If everything looks correct go to
step #5. If not, go back to step # 3.
4. Attach the 4 metal clips supplied to the mainframe See Photo B. Snap mainframe to
the dash pressing rmly on the bottom right and left, and then the top right and left.
5. Suggested…Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio.
Figure A
Correct Not Correct


Specyfikacje produktu

Marka: PAC
Kategoria: Niesklasyfikowane
Model: NDK748GB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z PAC NDK748GB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane PAC

PAC

PAC APSUB-TY13 Instrukcja

28 Grudnia 2024
PAC

PAC RP4-GM31 Instrukcja

8 Października 2024
PAC

PAC NU-GM51 Instrukcja

8 Października 2024
PAC

PAC NAV-1129 Instrukcja

8 Października 2024
PAC

PAC LP7-2R Instrukcja

8 Października 2024
PAC

PAC LP7-4 Instrukcja

8 Października 2024
PAC

PAC GMK367B Instrukcja

8 Października 2024
PAC

PAC CP1-FRD1 Instrukcja

8 Października 2024
PAC

PAC C2A-CHY5 Instrukcja

8 Października 2024
PAC

PAC NU-GM3 Instrukcja

8 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane