Instrukcja obsługi PAC LocPro Advanced LPA-2.4

PAC Konwerter audio/wideo LocPro Advanced LPA-2.4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PAC LocPro Advanced LPA-2.4 (3 stron) w kategorii Konwerter audio/wideo. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
12V
Connect to a fused
+12V constant source
GND
Connect to a good
chassis ground
REM IN
Remote turn on input (+)
REM OUT
Remote turn on output (+)
The LPA will provide a
+12V Remote Output using
DC Signal Sense from the
Right channel inputs
SPEAKER SIGNAL INPUTS
Connect to head unit or
RCA SIGNAL OUTPUTS
GROUND ISOLATION
Selectable: GND / ISO / 200Ω
Default: ISO
If ground / engine noise is present,
the jumper can be repositioned
GAIN
Variable: -28dB -+1dB
Allows gain adjustment of
the output signal
LPF
Low Pass Filter
Allows 250Hz low pass
filter for Rear Channels
BOOST
Variable: 0dB — 12dB
When LPF is ON, provides
Bass Boost (45Hz) for
Rear Channels
CLIP
Indicates signal clipping when
gain is set to high
REMOTE
Optional Re ote Level Com n-
trol Knob (LPA-R r EM) for Rea
Chan eln s
LOAD SELECT
Selectable: 20Ω / 60Ω / 20kΩ
Default: 20kΩ
For factory audio systems
requiring a resistance load to
output audio, select 60Ω first,
then 20Ω. All others use 20kΩ
setting
LPA-2.2 | 2 Channel Line-Ou put Convt erter
LPA-2.4 | 4 Channel Line-Ou put Convt erter
Selectable Ground Isolation and Load Select features ensu e a pur re, noise-f ee signal for any type of audio systemr .
This Quick Start Guide will get you going, but if you need additional help or information, please visit our website or
contact Tec ical ppohn Su rt.
Features & Wiring Information
Quick Start Guide
Technical Support | Phone: 727-592-5991 | Email: support@aampglobal.com | Chat: PAC-Audio.com | ©2021
X
FULLY OPEN TERMINALS
BEFORE INSERTING WIRE
JUMPERS CAN BE
TRIMMED FLUSH
1 2 3 4 5 6 SET
SEEK SEEK AM/FM DISC AUX RW FF
Speaker level input from a radio to RCA level output for an aftermarket amplier is the most commonly used conguration for the
L.O.C.PRO ADVANCED. This will create RCA level outputs from a radio that only has speaker level outputs.
In the example below, the Positive(+) and Negative(-) wires of two speakers are “tapped” and connected to the SPEAKER SIGNAL
INPUTS of the LPA. The speakers will continue to play as normal. The REM OUT is connected to the ampliers turn-on. When the
radio is turned on the LPA will automatically turn on the amplier. Lastly, the RCA SIGNAL OUTPUTS from the LPA are connected
to the aftermarket ampliers inputs.
Example Installation
Model Number LPA-2.2 LPA-2.4
Channels 2 IN — 2 OUT 2 IN — 4 OUT
Operating Voltage 9V—16V 9V-16V
Max Input Level (20kH Load Setting)Ω40V / 400W @ 4 Ohms 40V / 400W @ 4 Ohms
Auto Turn On DC Offset / Remote DC Offset / Remote
Output Voltage MAX @ 13.8V 9.5V RMS 9.5V RMS
Turn On Trigger (DC-Offset) 3V—7V 3V—7V
Load Input Impedance 20Ω, 60Ω, 20KΩ 20Ω, 60Ω, 20KΩ
Output Impedance <120Ω <120Ω
Variable Gain Adjustment -28dB—+1dB -28dB—+1dB
Signal To Noise >110dBA @ 6.4V Output >110dBA @ 6.4V Output
THD+N < 0.01% < 0.01%
Input Sensitivity 0.5V—40V 0.5V—40V
Frequency Response 10Hz—20kHz 10Hz—20kHz
Current Draw (Max) 40mA 40mA
Low Pass Filter <250Hz <250Hz
Bass Boost 0dB to +12dB 0dB to +12dB
Clip Indicator YES YES
Remote Level Control OPTIONAL (PN: LPA-REM) OPTIONAL (PN: LPA-REM)
Chassis Type Stamped Steel Stamped Steel
Terminal Gauge 18AWG / Quick Connect 18AWG / Quick Connect
Specications
OEM RADIO
CHASSIS GROUND (-)
12V CONSTANT POWER (+)
REMOTE AMP TURN-ON
Technical Support | Phone: 727-592-5991 | Email: support@aampglobal.com | Chat: PAC-Audio.com | IM-LPA2X REV. 040821
For more installation examples, tech tips and updates,
visit the L.O.C.PRO ADVANCED product pages on
PAC-Audio.com
Technical Support | Phone: 727-592-5991 | Email: support@aampglobal.com | Chat: PAC-Audio.com
2021 | TT-LPA-GAIN-ADJ 040721
Advanced method –
Required items:
• Digital Multi-Meter
• Test track media @ 1kHz and 100Hz. (Download from PAC-Audio website’s LPA section)
Pr yoper level adjustment is crucial for obtaining the best possible sound qualit . Following the guidelines
below will enable you to p operly set the output gain of the Lr PA using equipment that is eadily available. r
. This max line-level input will be
your target setting you will ead on the multi-meter r.
Perform the following procedure for each LPA you are installing.
1. Start with gain adjustment levels on LPA set to minimum.
o rff any loudness or other signal p ocessing features (preset EQ).
3. Turn source unit to maximum volume and start test track (1kHz for mid/high or full range, 100Hz for sub).
If Bluetooth is used as sou ce, make sur re the device volume is set to maximum.
4. Choose either left or right channel - With multi-meter, test output of LPA front channels. Probe with neg-
ative on RCA shield and positive in center of RCA output.
gain level if clipping light turns on.
requirements).
7. Turn volume down and system off.
Example scenarios:
voltage from the LPA.
-
age from the LPA.
Basic method –
2. Turn head unit to ¾ maximum volume and play test track (Random Noise) or a familiar song that has
dynamic attributes.
For example, if your volume goes to 40 you will tu n it up to 30 and play a song that has somer
quiet sections and some really loud sections.
3. Slowly adjust f ont channel gain of LPA until just a hint of distortion is audible, and thenr
back down gain just under that th eshold and the distortion goes awar y.
4. Repeat steps 1-3 for rear channels.
Line Output Converter Gain Level Set-Up

Specyfikacje produktu

Marka: PAC
Kategoria: Konwerter audio/wideo
Model: LocPro Advanced LPA-2.4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z PAC LocPro Advanced LPA-2.4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Konwerter audio/wideo PAC

PAC

PAC LocPro Advanced LPA-2.2 Instrukcja

15 Września 2024
PAC

PAC LocPro Advanced LPA-E.4 Instrukcja

11 Września 2024
PAC

PAC LocPro Advanced LPA1.2 Instrukcja

9 Września 2024
PAC

PAC LocPro Advanced LPA1.4 Instrukcja

7 Września 2024
PAC

PAC LocPro Advanced LPA-2.4 Instrukcja

6 Września 2024

Instrukcje Konwerter audio/wideo

Najnowsze instrukcje dla Konwerter audio/wideo

Tripp Lite

Tripp Lite P569-006-IND2 Instrukcja

15 Stycznia 2025
AJA

AJA 12G-AMA Instrukcja

15 Stycznia 2025
AJA

AJA FIDO-T-MM Instrukcja

15 Stycznia 2025
AJA

AJA OG-FIDO-TR Instrukcja

15 Stycznia 2025
INOGENI

INOGENI U-CAM Instrukcja

14 Stycznia 2025
D-Link

D-Link AirPremier DWL-1800 Instrukcja

13 Stycznia 2025
StarTech.com

StarTech.com ST122VGA Instrukcja

10 Stycznia 2025
D-Link

D-Link DMC-300M Instrukcja

9 Stycznia 2025
TRENDnet

TRENDnet TFC-GSFP Instrukcja

9 Stycznia 2025
TRENDnet

TRENDnet TFC-FSFP Instrukcja

9 Stycznia 2025