Instrukcja obsługi PAC GMK403

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PAC GMK403 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
©2016 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver.1/16 PRINT Ver. 8/13
GMK403 Mounting Kit
VEHICLE APPLICATION
Buick
2013-16 ENCLAVE
Chevrolet
2013-16 TRAVERSE
GMC
2013-16 ACADIA
iGMK403
WWW.AIUS.NET
2500 East Francis Street Ontario, CA 91761, U.S.A.
USA Sales (800) 336-6500
Canada Sales (888) 922-3006
CUSTOMER HELP LINE
USA 800-323-4329 • Canada 800-245-8777
DASH DISASSEMBLY INSTRUCTIONS
1. Carefully unclip the dash trim bezel from around the radio (see photo below),
disconnect the climate control harness and remove trim bezel.
2. Remove the (4) Phillips screws securing the radio/hazard button assembly
to the sub-dash.
3. Pull radio forward, disconnect the wire harness(s) and antenna lead and
remove radio/hazard button assembly.
4. There is no need to unplug and remove the hazard button assembly,
just set aside carefully.
SINGLE ISO w/POCKET INSTALLATION INSTRUCTIONS
1. Insert ISO brackets to rear of kit as shown in Figure A
2. Insert pocket into lower section of kit from rear & lock into slots of mounting brackets.
3. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible or screws supplied with kit.
4. Slide radio forward or backward for desired look and tighten screws.
5. Attach a rear support bracket to the rear of the new radio and adjust as necessary
to support the weight of the radio (Optional)
23
Fig A
ISOBRK
ISOBRK
DOUBLE DIN INSTALLATION INSTRUCTIONS
1. Attach ISO brackets to the rear of the main mounting kit.
2. Slide radio into kit from rear & attach to ISO mounting brackets using
screws supplied with radio when possible or screws supplied with kit
(do not tighten screws at this time).
3. Slide radio forward or backward for your desired look and then tighten
the mounting screws.
4. Suggested...Attach rear support.
Fig B
ISOBRK
ISOBRK
Remove shaded tabs
on left and right sides
of the brackets
(Right side not shown)

Specyfikacje produktu

Marka: PAC
Kategoria: Niesklasyfikowane
Model: GMK403

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z PAC GMK403, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane PAC

PAC

PAC RP4-GM31 Instrukcja

8 Października 2024
PAC

PAC NU-GM51 Instrukcja

8 Października 2024
PAC

PAC NAV-1129 Instrukcja

8 Października 2024
PAC

PAC LP7-2R Instrukcja

8 Października 2024
PAC

PAC LP7-4 Instrukcja

8 Października 2024
PAC

PAC GMK367B Instrukcja

8 Października 2024
PAC

PAC CP1-FRD1 Instrukcja

8 Października 2024
PAC

PAC C2A-CHY5 Instrukcja

8 Października 2024
PAC

PAC NU-GM3 Instrukcja

8 Października 2024
PAC

PAC CP1-TSL1 Instrukcja

8 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024