Instrukcja obsługi Ozito SGP-5000

Ozito pistolet do malowania SGP-5000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito SGP-5000 (6 stron) w kategorii pistolet do malowania. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
1
SPRAY
GUN
500W
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 220-240V ~ 50Hz
Power: 500W
Max. Flow Rate: 550ml/min
Max Viscosity: 60 DIN-sec
Container Capacity: 1000ml
Nozzle: ø2.0 / ø2.5mm
Weight: 1.45kg
WHAT’S IN THE BOX
Spray Gun
Cleaning Needle & Brush
Paint Pot & Needle Tool
2 x Nozzles
Viscosity Cup
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
SGP-5000
0117
1 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 12 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Warranty excludes consumable
parts, for example: viscosity cup, cleaning needle, nozzle, paint pot.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than
that specified on the tool.
• If the tool shows signs of damage or defects caused by or
resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
1
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Nozzle
2 Air Cap
3 Paint Head
4 On/Off Trigger
5 Spray Regulator Dial
6 Paint Pot
7 Locking Lever
8 Soft Grip Handle
9 Spray Gun Body
10Airlter
SPRAY GUN
KNOW YOUR PRODUCT
1 2 3 4 5
6 7
11 12 13 14 15 16
8 9 10
1. ASSEMBLY
11 Cleaning Needle
12 Cleaning Brush
13 Viscosity Cup
14 Nozzles x 2
15 Paint Pot Lid
16 Fluid Needle Removal Tool
ACCESSORIES
SETUP & PREPARATION
1 Insert the paint head into the gun body by aligning the
arrows on the neck of the paint head and body.
Note: Ensure the locking lever is rotated out of the way to
avoid damaging the locking lever.
1 When spraying horizontal
or low objects turn the
suction tube to the front.
3 Rotate the locking lever
forward to secure the paint
head.
2 Rotate the paint head
clockwise into the correct
orientation.
2 When spraying overhead
objects turn the suction
tube to the back.
Inserting the Paint Head
Aligning the Suction Tube
WARNING! ENSURE THE TOOL IS DISCONNECTED FROM
THE POWER SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
3. CONTROLS
OPERATION
2. PREPARATION
1 Before pouring any paint
or thinners, work out how
much of each substance is
needed.
1 Submerge the viscosity
cupintothematerialtoll.
3 Time how long it takes to empty the cup. This is referred to
as DIN seconds.
Thinning is particularly important when spraying. Most paints
are supplied ready for brush application and need to be diluted
sufcientlyforsprayingpurposes.
Note: Water based paints can be thinned using water.
Follow the manufacturers guide for thinning ratios which
should be labelled on the paint container.
It is vital to determine the viscosity of the coating material to
see if it is suitable to be used in the spray gun.
2 Pour the required paint
andthinnersusingalter
into a mixing cup and mix
thoroughly.
2 Raise the cup out of the
material and start timing.
4 If the material is above 60 DIN-sec the material will need to
be thinned more and retested.
Thinning
Determining Viscosity
NOTE: FOR BEST RESULTS, SURFACE PREPARATION AND PAINT
THINNING ARE THE TWO MOST IMPORTANT AREAS. ENSURE
ALL SURFACES ARE FREE OF DUST, DIRT AND GREASE.
IMPORTANT! THE SPRAY GUN CANNOT BE USED WITH
MATERIALS CONTAINING ABRASIVE SUBSTANCES, GLAZES,
DISPERSION PAINTS, CAUSTIC AND ALKALINE SUBSTANCES,
TEXTURED COATINGS OR TOXIC SPRAYS.
1 Squeeze the on/off trigger
to start spraying.
1 Squeeze the trigger
while aiming at a piece of
cardboard or scrap.
1 Removetheltercoverby
removing the 4 screws with
a screwdriver.
3 Securetheltercoverbackontothespraygunwiththe4
screws.
The regulator dial is a stop that limits the distance the trigger
can be pressed. This results in less material being sprayed.
2 Release the on/off trigger
to stop spraying.
2 Rotate the regulator dial
to the required position for
optimal results.
2 Wash or replace the dirty
lterandplaceinsidethe
inner cover.
On/Off Trigger
Spray Regulator Dial
Replacing Air Filter
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
A RESIDUAL CURRENT DEVICE (RATED 30MA OR LESS)
MUST BE USED.
PAINT
THINNERS
PAINT
THINNERS
WARNING! NEVER OPERATE THE SPRAY GUN WITHOUT
A FILTER. DIRT COULD BE SUCKED IN AND DAMAGE THE
OPERATION OF THE UNIT.

Specyfikacje produktu

Marka: Ozito
Kategoria: pistolet do malowania
Model: SGP-5000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito SGP-5000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje pistolet do malowania Ozito

Ozito

Ozito PXOSGK-250 Instrukcja

29 Grudnia 2024
Ozito

Ozito ASG-7000U Instrukcja

3 Października 2024
Ozito

Ozito PSS-7000 Instrukcja

9 Września 2024
Ozito

Ozito ASG-PRO Instrukcja

4 Września 2024
Ozito

Ozito PSB-5090 Instrukcja

27 Sierpnia 2024
Ozito

Ozito SGP-5000 Instrukcja

26 Sierpnia 2024
Ozito

Ozito ASG-LPR Instrukcja

22 Sierpnia 2024
Ozito

Ozito ASG-SFE Instrukcja

20 Sierpnia 2024
Ozito

Ozito ASG-PGU Instrukcja

17 Sierpnia 2024
Ozito

Ozito MACK-300 Instrukcja

4 Lipca 2024

Instrukcje pistolet do malowania

Najnowsze instrukcje dla pistolet do malowania

DeWalt

DeWalt DWMT70778 Instrukcja

8 Stycznia 2025
Worx

Worx WX020 Instrukcja

3 Stycznia 2025
Wagner

Wagner FineCoat 9900 Plus Instrukcja

30 Grudnia 2025
Aqua Joe

Aqua Joe AJ-MSG-TND Instrukcja

30 Grudnia 2025
MSW

MSW -PCS-50 Instrukcja

15 Października 2024
MSW

MSW -RPS-100 Instrukcja

15 Października 2024
Abac

Abac G-542F Instrukcja

8 Października 2024
Abac

Abac G-540F Instrukcja

8 Października 2024
Abac

Abac G-550F Instrukcja

8 Października 2024
Abac

Abac G-551A Instrukcja

8 Października 2024