Instrukcja obsługi Ozito PXPWK-2524


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXPWK-2524 (6 stron) w kategorii Myjka wysokociśnieniowa. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
STANDARD EQUIPMENT
PXPWS-1824
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Rated Pressure: 2.4 MPa (348 psi)
Allowable Pressure: 2.4 MPa (348 psi)
Max. Flow: 5.4 l/min
Rated Flow: 2.7 l/min
Water Inlet Temperature: 5 – 40C
Max. Inlet Water Pressure: 0.5 MPa (72 psi)
Max. Suction Height: 2m
Weight: 3.4kg
ozito.com.au
0823
Portable Pressure
Washer
Nozzle, Lance x 2
PORTABLE
PRESSURE
WASHER
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO. 25 Fox Drive, Dandenong South, Victoria 3175, Australia.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
If the tool has been operated on a supply voltage other than that specied
on the tool.
If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.
Professional, industrial or high frequency use.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
Siphon Hose, Foam
Sprayer
Battery Protector,
Bottle Adapter
Water Filter, Transport
Bag
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Multifunction Nozzle
2. Connector
3. On/Off Trigger
4. Trigger Lock
5. ECO Button
6. Air Release Trigger
7. Ø12mm Water Inlet
8. Battery Seating
9. Splash Guard
10. Ø12mm x 5m Siphon Hose
11. Extension Lance x 2
12. 350ml Foam Sprayer
13. Water Filter
14. Transport Bag
15. Bottle Adapter
16. Silicon Battery Protector
This tool is compatible with all batteries & chargers
from the Ozito PXC range.
PORTABLE PRESSURE WASHER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. ACCESSORIES
SETUP & PREPARATION
1 2
11
345
7
10
8 9
6
12 13 14
16
15
Fitting Outlet Accessories
Either the included Multifunction Nozzle or Foam Sprayer can be
attached directly to the Connector of the Pressure Washer depending on
your cleaning application.
1. Push the desired outlet accessory into the connector and twist
counterclockwise to lock it into place.
2. To disconnect the accessory, push the accessory into the connector,
twist clockwise and pull it out.
WARNING! ENSURE THE SELECTED ATTACHMENT IS
SECURE BEFORE YOU BEGIN OPERATION.
Note: If a longer reach is required, connect one or both of the
Extension Lances together and to the Connector, and attached the
desired outlet accessory to the free end of the extension lance as
described in step 1 above.
3. Push the Extension Lance into the Connector and twist clockwise to
hold in place.
Note: There is a locking sleeve on the extension lance to prevent any
movement during use.
4. Rotate the sleeve clockwise until it tightens up against the connector.
WARNING! DO NOT SPRAY FLAMMABLE LIQUIDS.
WARNING! WATER THAT HAS PASSED THROUGH THE
PRESSURE WASHER IS NOT DRINKABLE.
“SNAP”
“SNAP”
Using the Multifunction Nozzle
The water jet can be controlled when using the Multifunction Nozzle.
By turning the nozzle you can change the shape of the water jet from
solid cone to a narrow at fan, a wide at fan or high impact rotating
jet.
Turn the Multifunction Nozzle counterclockwise to select the spray
pattern.
Note: The nozzle
will only rotate in one
direction to select a
spray pattern, rotating
the nozzle clockwise
will disconnect the
nozzle from the
connector.
WARNING! DO NOT OPERATE THE UNIT WHILE
CHANGING THE NOZZLE SPRAY PATTERNS.
Solid Cone
A narrow jet over a
small area for general
purpose concentrated
cleaning .
Narrow Flat Fan
A fan jet to clean larger
areas faster.
• Wide Flat Fan
A wide soft water fan to
wash away foam soap,
dust, loose dirt or sand.
High Impact
Rotating Jet
Covers a wide area to
remove ingrained dirt.
Using the Foam Sprayer
Pour detergent directly into the foam
bottle and attach it to the lance or directly
to the connector. Follow the detergent
manufacturers’ directions for use.
Unscrew the container of the foam sprayer,
then ll with foam cleaner. You can control
the quantity of foam by turning the dial
during use.
WARNING! NEVER RUN BLEACH OR DETERGENTS NOT
DESIGNED FOR PRESSURE WASHERS WITH THIS UNIT.
Fitting Inlet Accessories
Either the included Siphon Hose or Bottle Adaptor can be attached
directly to the Water Inlet of the Pressure Washer depending on what
water sauce you choose to use. Alternatively as the water inlet is
equipped with a standard hose connector (Ø1/2, 13mm approx.), plug
your supply hose coupling onto the water inlet. Water source maximum
pressure of 0.3 MPa (43psi), max. water temperature 40C.
5m Siphon Hose
1. Push quick connector onto the
Water Inlet.
3 Equip the supplied Water Filter
to the opposite end to use water
from a container lled with clean
water. Max. suction height 2m.
Note: The included water
lter must be in place to prevent
impurities in the water source from
entering the unit and damaging the pump.
2. The connector will snap and
lock in place to secure the
siphon hose in place.
Bottle Adapter
1. Insert the bottle adapter into the
water inlet. Turn the bottle ant-
clockwise to secure in place.
2. Push quick connector onto the
Water Inlet.
3. The quick connector will snap
and lock in place to secure the
bottle adaptor in place.
WARNING! THIS PRODUCT MUST NOT BE CONNECTED
TO THE POTABLE WATER MAINS WITHOUT BACK FLOW
PREVENTION. CHECK LOCAL AND NATIONAL PLUMBING
REGULATIONS BEFORE CONNECTING THE MACHINE TO
THE POTABLE WATER MAINS.


Specyfikacje produktu

Marka: Ozito
Kategoria: Myjka wysokociśnieniowa
Model: PXPWK-2524

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXPWK-2524, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Myjka wysokociśnieniowa Ozito

Ozito

Ozito PXPWK-2524 Instrukcja

4 Października 2024
Ozito

Ozito PWE-1500U Instrukcja

7 Września 2024
Ozito

Ozito PWE-1300U Instrukcja

5 Września 2024
Ozito

Ozito HPW-1885K Instrukcja

22 Sierpnia 2024

Instrukcje Myjka wysokociśnieniowa

Najnowsze instrukcje dla Myjka wysokociśnieniowa

Sun Joe

Sun Joe SPX3001-RM Instrukcja

14 Października 2024
Worx

Worx WG629.1 Instrukcja

13 Października 2024
PowerPlus

PowerPlus POWXG9025 Instrukcja

10 Października 2024
Cecotec

Cecotec HidroBoost 1400 Instrukcja

9 Października 2024
Einhell

Einhell RT-HP 1648 TR Instrukcja

9 Października 2024
Einhell

Einhell RT-HP 1545 Instrukcja

9 Października 2024
Einhell

Einhell HR 160 Instrukcja

9 Października 2024
Anova

Anova H1800 Instrukcja

8 Października 2024
Anova

Anova H1950 Instrukcja

8 Października 2024