Instrukcja obsługi Ozito PXBHK-120
Ozito
Wiertła śrubowe
PXBHK-120
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXBHK-120 (8 stron) w kategorii Wiertła śrubowe. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
WHAT’S IN THE BOX
Brushless Hammer Drill
2 x 1.5Ah Batteries
Fast Charger
B
R
U
S
H
L
E
S
S
SPECIFICATIONS
Input: 18V
Chuck Size: 13mm Keyless
No Load Speed: 0-400 / 0-1,500/min
Impact Rate: 0-6,400 / 0-24,000bpm
Torque / Max. Torque: 21 / 55Nm
Max. Drilling Ø: 32mm Wood
10mm Metal
13mm Masonry
Weight: 1.2kg
BRUSHLESS
HAMMER DRILL
INSTRUCTION MANUAL
ozito.com.au
PXBHK-120
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
0716
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
B
R
U
S
H
L
E
S
S
B
R
U
S
H
L
E
S
S
KNOW YOUR PRODUCT SETUP & PREPARATION
1. BATTERY & CHARGING
1 Metal Ratcheting Chuck
2 Torque Adjustment Collar
3 Function Collar
4 Variable Speed Trigger
5 Forward / Reverse Lever
6 Sure Grip Handle
7 LED Light
8 Battery Seating
9 Belt Clip
10 Gear Selector
11 2 x 1.5Ah Batteries 12 Fast Charger
BRUSHLESS HAMMER DRILL
1
11
2
12
3 4 5 6 7 8 10
9
The supplied batteries will be shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
1 Connect the charger into a mains power outlet.
4 The charger LED will illuminate
red signifying that the battery is
charging.
3 With the charger sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a rm connection.
2 The charger LED will ash green
showing power is being supplied
to the charger.
5 The charger LED will illuminate
green once the battery is fully
charged.
Charging your lithium ion battery - Fast Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Flashing) Battery is charging (low charge)
RED (Illuminated) Battery is charging (mid charge)
GREEN (Illuminated) Battery is fully charged
BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD
BE PROTECTED BY A RESIDUAL CURRENT DEVICE
(RATED AT 30mA OR LESS).
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER
2. BATTERY INSTALLATION
15
1
S
H
L
E
S
S
Battery Charge Indicator
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires
immediate charging
Low state of charge, requires charging soon.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
1 Connect the charger into a mains power outlet.
4 The charger LED will illuminate red signifying that the battery is charging.
3 With the battery sitting on a at
surface, align the raised ribs on the
battery with the recess in the charger
and slide onto the battery ensuring a
rm connection.
2 The charger LED will ash green
showing power is being supplied
to the charger.
5 When removing the charger from the
battery, rst press the battery release
tab, then slide the charger from its
position.
Charging your lithium ion battery - Eco Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Illuminated) Battery is charging (low charge)
GREEN (Illuminated) Battery is fully charged
RED (Flashing) Battery or Charger fault
RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from
charger and store at room temperature 20ºC. Insert
battery again when at correct charging temperature). If
this happens again, the battery is defective and needs
to be replaced.
Installing the Battery Pack
1 Slide the battery into the drill base until it clicks into place.
Removing the Battery Pack
1 Hold down the battery
release button.
2 Slide the battery out.
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | Wiertła śrubowe |
| Model: | PXBHK-120 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito PXBHK-120, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Wiertła śrubowe Ozito
12 Października 2024
6 Października 2024
9 Sierpnia 2024
6 Sierpnia 2024
3 Lipca 2024
Instrukcje Wiertła śrubowe
- Wiertła śrubowe AEG
- Wiertła śrubowe Worx
- Wiertła śrubowe Bosch
- Wiertła śrubowe Parkside
- Wiertła śrubowe Festool
- Wiertła śrubowe Black & Decker
- Wiertła śrubowe Makita
- Wiertła śrubowe RYOBI
- Wiertła śrubowe Güde
- Wiertła śrubowe Ferm
- Wiertła śrubowe Hitachi
- Wiertła śrubowe Vonroc
- Wiertła śrubowe Skil
- Wiertła śrubowe Tryton
- Wiertła śrubowe Ronix
- Wiertła śrubowe Maktec
- Wiertła śrubowe Bort
- Wiertła śrubowe Elu
Najnowsze instrukcje dla Wiertła śrubowe
15 Października 2024
15 Października 2024
13 Października 2024
13 Października 2024
13 Października 2024
12 Października 2024
11 Października 2024
11 Października 2024
10 Października 2024
10 Października 2024