Instrukcja obsługi Ozito OCBC-200

Ozito Ładowarka baterii OCBC-200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito OCBC-200 (6 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
BATTERY
CHARGER
12V 2A
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 220–240V ~ 50Hz
Max. Power Rating: 35W
Max. Nominal Output: 12V DC, 2A
Battery Capacity: 3 to 60 Ah
Ambient Temp.: -20°C to 40°C
IP Rating: IP65
Tool Weight: 0.4kg
OCBC-200
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: .
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
OZITO Australia/New Zealand (Head Office) 25 Fox Drive Dandenong South, Victoria, Australia 3175.
ozito.com.au
Battery Charger
0821
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
BATTERY
STATUS
MODE
STATUS
25 50 75% % %
ERROR
100%
80%
2 h
Ah
5 h
15 h
30 h
4
10
30
60
Charging time/hours =
Battery capacity in Ah
Amperes (charging current)
1. Red Positive Terminal Clamp (+)
2. Black Negative Terminal Clamp (-)
BATTERY CHARGER
KNOW YOUR PRODUCT
1. AUTOMATIC CHARGING
SETUP & PREPARATION
5. Mode Status LED’s
6. Battery Status LED’s
7. Error LED
12 3 4
5 6 7
WARNING! READ AND UNDERSTAND THE WARNINGS
BEFORE SETUP AND CHARGING.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
WARNING! DO NOT USE FOR CHARGING LITHIUM ION
PHOSPHATE RECHARGEABLE BATTERIES (E.G. LiFePO4)
OR OTHER LITHIUM RECHARGEABLE BATTERIES.
3. LED’s
4. Mode Button
The battery charger is a microprocessor controlled automatic
charger, it is suitable in particular for charging maintenance-free
batteries and for the long-term charging and maintenance-
charging of batteries which are not in constant use, e.g. for
classic cars, recreational vehicles, lawn tractors and alike. The
integrated microprocessor enables charging in several steps. The
final charging step, maintenance charging, maintains the battery
capacity at 95–100% and therefore keeps the battery fully charged
at all times. The charging operation does not need to be monitored.
However, do not leave the battery unattended if you charge it over
an extended period of time, so that you can disconnect it from the
mains power supply in the event of a fault in the charger.
The battery charger is designed for mobile use only and not for
installation in caravans, mobile homes or similar vehicles. The
battery charger cannot be used as a buffer power supply, e.g.
while changing a battery. Do not expose the charger to rain or
snow.
Calculating the Charging Time
The charging time
depends on the
charge status of the
battery. If the battery
is fully discharged, the
approximate charging
time up to approx.
80% charged can be
calculated using the
following formula:
Note: The charging current should be 1/10 of the battery capacity.
Overload Cut-Out
The battery charger is equipped with electronic protection against
overload, short circuit and swapped poles. One or more fine fuses
are also fitted. If the fuse suffers a defect it must be replaced by
a new fuse with the same amp value. If necessary, please contact
Ozito customer service.
25%
50%
75%
100%
ERROR
2. SYMBOLS
Battery Status
When illuminated
Battery charging status = 25%
Battery charging status = 50%
Battery charging status = 75%
Battery charging status = 100%
Error LED
When illuminated.
• If the voltage of the battery is less than 3.5V or
more than 15V. The battery is either unsuitable
for charging or is defective. It is also possible
that other battery errors or faults can mean that
the battery cannot be charged.
• If the terminal clamps are connected to the
battery terminals with the wrong polarity. The protection against
swapped poles ensures that the battery and charger do not get
damaged. Remove the charger from the battery and start the
charging process from the beginning again.
• If there is a short-circuit between the two terminal clamps (the
metal parts of the clamps come into contact with each other).
The protection against short-circuits ensures that the battery
and charger do not get damaged.
Mode Status
When Illuminated
12V CHARGING = Normal operation.
Charging of a 12V battery (lead acid battery, AGM
battery and GEL battery). 2A charging current.
12V WINTER MODE = For batteries with low
capacity.
Charging of a 12V battery (lead acid battery, AGM
battery and GEL battery) in winter mode with
an ambient temperature of – 20°C to +5°C. 2A
charging current. Do not charge frozen batteries.
MAINTAIN MODE = Reduced maximum charge
current.
Charging of a 12V battery (lead acid battery, AGM
battery and GEL battery) in charge maintain mode.
Battery capacity 3 - 32Ah. 1A max. charging
current.

Specyfikacje produktu

Marka: Ozito
Kategoria: Ładowarka baterii
Model: OCBC-200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito OCBC-200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ładowarka baterii Ozito

Ozito

Ozito PXBP-400U Instrukcja

4 Października 2024
Ozito

Ozito OCBC-400 Instrukcja

28 Września 2024
Ozito

Ozito PXCG-030U Instrukcja

9 Września 2024
Ozito

Ozito OCBC-1000 Instrukcja

26 Sierpnia 2024
Ozito

Ozito OJL-325 Instrukcja

21 Sierpnia 2024
Ozito

Ozito PXCG-060 Instrukcja

20 Sierpnia 2024
Ozito

Ozito OCBC-600 Instrukcja

18 Sierpnia 2024
Ozito

Ozito OCBC-200 Instrukcja

17 Sierpnia 2024

Instrukcje Ładowarka baterii

Najnowsze instrukcje dla Ładowarka baterii

Graupner

Graupner Ultramat 12 Instrukcja

13 Stycznia 2025
Graupner

Graupner ULTRA DUO PLUS 30 Instrukcja

13 Stycznia 2025
Fuxtec

Fuxtec FX-E1LG1A Instrukcja

13 Stycznia 2025
Voltcraft

Voltcraft Charge Manager 410 Instrukcja

11 Stycznia 2025
Nitecore

Nitecore UHX1 PRO Instrukcja

11 Stycznia 2025
Envivo

Envivo ENV-1597 Instrukcja

11 Stycznia 2025
Xblitz

Xblitz XC1 Instrukcja

10 Stycznia 2025
Jackery

Jackery Explorer 240 v2 Instrukcja

7 Stycznia 2025
Jackery

Jackery Explorer 1000 v2 Instrukcja

7 Stycznia 2025
Schwaiger

Schwaiger LSET500 513 Instrukcja

7 Stycznia 2025