Instrukcja obsługi Ozito IWR-120

Ozito zgrzewarka IWR-120

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito IWR-120 (8 stron) w kategorii zgrzewarka. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
INVERTER
ARC
WELDER
120 Amp
INSTRUCTION MANUAL
SPECIFICATIONS
Welding Current: 20 - 120A
Arc Electrode Size: 1.6 - 3.2mm
Duty Cycle: 20%@120A (24.8V) DC
60%@69A (22.8V) DC
100%@54A (22.2V) DC
Weight: 3.2kg
IWR-120
WHAT’S IN THE BOX
Accessories
Inverter Welder
Earth Clamp
Arc Electrode Holder
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: Welding tips,
torch nozzles, flexible inner tube, welding wire, wire feed rollers,
welding lenses, wire brushes and chipping hammer.
WARNING
The following actions will result in the warranty being void.
If the tool has been operated on a supply voltage other
than that specified on the tool.
If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
Failure to perform maintenance as set out within the
instruction manual.
If the tool is disassembled or tampered with in any way.
Professional or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
1118
MIN 120A
INVERTER ARC WELDER
MIN 120A
INVERTER ARC WELDER
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Power On LED
2 Thermal Overload LED
3 Digital Display
4 Welding Current Control
5 Negative Output Terminal
6 Positive Output Terminal
7 On/OSwitch(rear)
INVERTER ARC WELDER
KNOW YOUR PRODUCT
8 Earth Clamp
9 Arc Electrode Holder
10 Hammer Brush
11 Welding Mask
SETUP & PREPARATION
1
8 9 10 11
2 3 4 5 6 7
1. WELDING MASK
Fitting the Welding Screen
1 Insert the glass retaining pins
into the holes from the outside
ofthemaskandthentthe
retaining clips from the inside.
Rotate the clip to allow the
glass to be inserted.
3 Bend the sides and top of the
welding mask inwards and clip
together at the corners.
2 First insert the clear glass
into the recess of the welding
mask, followed by the dark
safety glass and then the
plastic frame.
Rotate the retaining clips to
lock in position.
4 Insert the 3 screws into the
handle mounting holes from
the outside. Fit the handle
onto the screws from inside
the mask and then secure
using the 3 nuts.
Theincludedweldingmaskmustbettedwiththeweldingscreenand
handle before using for welding.
MIN 120A
INVERTER ARC WELDER
3. CONTROLS 2. ASSEMBLY
1 Installthethin(uncoated)
end of Electrode into the arc
electrode holder.
2 Attach the Earth Clamp to the
work piece ensuring area is free
from paint or dirt so that there is
a good electrical connection.
2 Attach Earth Clamp lead to the
NEGATIVE(-)outputterminal.
Insert & rotate until connection
isrm.
1 Attach Arc Electrode Holder
leadtothePOSITIVE(+)output
terminal. Insert & rotate until
connectionisrm.
Welding Current Control
On/O Switch
Terminals
Electrode and Earth Clamp
Status LED Lights
1 The welding current can be
increased or decreased by
turning the Welding Current
control knob.
The welding current should be
setaccordingtothespecic
application and material.
1 To turn the welder on, push
theon/oswitchintotheon
position 'I'.
1 Toturntheweldero,push
theon/oswitchintotheo
position '0'.
Theon/oswitchislocatedattherearofthewelderandmustbeturned
on for the unit to operate.
Power ON LED
Illuminates when the power cord
is connected to a live mains outlet
and the ON/OFF switch is in the
ON position
Note: The cooling fan operates
when ON.
Thermal Overload LED
When illuminated, wait for
the LED to extinguish before
resuming welding.
Note: This can occur in heavy
use and does not indicate a fault.
MIN 120A
MIN 120 A
INVERTER ARC WELDER
NOTE: FULLY INSULATED LOCK-TYPE CONNECTORS SHOULD
BE USED WITH THE INVERTER WELDERS TERMINALS.
NOTE: AVOID USE OF LONG EXTENSION LEADS.
WARNING: ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING STEPS.
WARNING: DO NOT TOUCH THE ELECTRODE WHILE
THE WELDER IS ON.
IfthepowerLEDdoesnotturnonwhentheon/oswitchisinthe
correct position:
Test supply with another product, avoid using extension leads
Check the rating of the circuit breaker on the supply and other
appliances connected to the circuit.
The welder is a high power device and it is recommended that is be
the only appliance on the circuit to ensure it has enough power to
operate.
If a 15A circuit is available, it is recommended that the welder be
connected to this.

Specyfikacje produktu

Marka: Ozito
Kategoria: zgrzewarka
Model: IWR-120

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito IWR-120, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą