Instrukcja obsługi Ozito EGR-2050
Ozito
Maszyny do grawerowania
EGR-2050
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito EGR-2050 (6 stron) w kategorii Maszyny do grawerowania. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective
it will be replaced in accordance with the terms of this warranty. Warranty excludes
consumable parts, for example: engraving tip, stencils, etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage otherthan that specified on the
tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse,
accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
ELECTRIC ENGRAVER
15W
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE
PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of a
defective product you may be able to claim such expenses by contacting our
customer service helpline above.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
0716
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 230-240V ~ 50Hz
Power: 15W (S2: 30min)
No Load Speed: 6,000/min
Accessory Diameter: 3mm
WHAT’S IN THE BOX
Electric Engraver
Stencil x 2 and Hex Key
ozito.com.au
1 Engraving Tip
2 Tip Release Screw
3 Stroke Adjustment Dial
4 On/off Switch
ELECTRIC ENGRAVER
KNOW YOUR PRODUCT
6
5 Stencil x 2 6 Hex Key
Scan this QR Code with your
mobile device to take you to the
online manual.
ONLINE MANUAL
1. FITTING ENGRAVING TIP
1. Loosen the tip release screw
using the supplied hex key.
3. Secure engraving tip by
tightening the tip release
screw.
2. Fully insert engraving tip. It should petrude roughly by 8.5mm.
SETUP & PREPARATION
Caution: Ensure the tool is disconnected from the power supply
before performing any of the following operations.
2. ON/OFF SWITCH
OPERATION
The tool is recommended for use with a residual current device
with a rated residual current of 30mA or less. The stroke adjustment controls the stroke length and in turn the
engraving depth.
2. Set stroke adju
desired setting
3. STROKE ADJUSTMENT DIAL
1. Turn the stroke adjustment
dial so that the marker
points to desired setting.
2. Foranemark,setthe
stroke adjustment dial to
lower settings.
3. Foradeeper,thickermark,
set the stroke adjustment
dial to a higher settings.
Toturnon,pushthe
on/off switch down to
“I” position.
Toturnoff,pushthe
on/off switch up to
“O” position.
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | Maszyny do grawerowania |
| Model: | EGR-2050 |
| Kolor produktu: | Biały |
| Typ produktu: | Skrzyniowy |
| Typ kontroli: | obrotowy |
| Położenie urządzenia: | Wolnostojący |
| Wysokość produktu: | 83.5 mm |
| Szerokość produktu: | 76.04 mm |
| Głębokość produktu: | 55.88 mm |
| Waga produktu: | 35000 g |
| Szerokość opakowania: | 88.49 mm |
| Wysokość opakowania: | 78.99 mm |
| Głębokość opakowania: | 58.19 mm |
| Poziom hałasu: | - dB |
| Obciążenie: | - W |
| Klasa efektywności energetycznej (stara): | A+ |
| Zawias drzwiczek: | W górę |
| Roczne zużycie energii: | - kWh |
| Dwustronne drzwi: | Nie |
| Tworzywo półek: | Metal |
| Pojemność zamrażarki netto: | 142 l |
| Czas przechowywania podczas awarii zasilania: | - h |
| Pojemność zamrażarki brutto: | - kg/24h |
| Liczba półek w zamrażarce: | 1 |
| Termostat: | Tak |
| Temperatura zamrażarnika (min): | -12 °C |
| Zakres pomiarowy temperatury: | °C |
| Temperatura zamrażarki (maksymalna): | -24 °C |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito EGR-2050, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyny do grawerowania Ozito
6 Sierpnia 2024
Instrukcje Maszyny do grawerowania
Najnowsze instrukcje dla Maszyny do grawerowania
5 Lipca 2024
4 Lipca 2024