Instrukcja obsługi Ozito ACP-2115K
Ozito
Compressor
ACP-2115K
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito ACP-2115K (8 stron) w kategorii Compressor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4 6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRE SS URE GAU GE
kg/cm²
AIR COMPRESSOR
1.5HP 21L
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4 6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRES S U RE GAU G E
kg/cm ²
AIR CO MPRE SSO R
1.5HP 21L
OIL FREE AIR
COMPRESSOR
21L 1.5HP
INSTRUCTION MANUAL
SPECIFICATIONS
Power Supply: 230–240V ~ 50Hz
Motor: 1100W (1.5HP) S3 50%
Tank Capacity: 21L
No Load Speed: 2,850/min
Max. Pressure: 8bar (116psi)
Max. Flow Rate: 140L/min
Free Air Delivery: 70L/min
IP Rating: IP20
Weight: 22.5kg
ACP-2115K
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of 36 months from the original date of purchase. If
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ozito.com.au
21L Air Compressor
2 x Wheels, 2 x Large Bolts, 4 x
Large Washers, 2 x Large Spring
Washers & 2 x Large Nuts
Air Filter, Support Foot, Small Bolt, 2
x Washers, Spring Washer & Nut
Blow Gun, Brush Nozzle, Tapered
Nozzle, Rubber Nozzle, 2 x Needle
Nozzles, Needle Adaptor & Tyre
Pressure Gun
6 x Nitto Fittings, 2 x Adaptors,
Coiled Air Hose & Dust Mask
0621
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4 6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRES SU RE GA UGE
kg/cm²
AIR COMPRESSOR
1.5HP 21L
1. Air Filter
2. Motor
3. On/Off Switch
4. Pressure Regulator
5. Carry Handle
6. Regulated Pressure Outlet
7. Pressure Gauge
8. Support Foot
9. Drain Valve
10. Pressure Tank
11. Wheel
12. Tank Handle
AIR COMPRESSOR
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1 2 3 4 5
67891112 10
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Pre-Setup Checks
• Examine the machine for signs of transit damage. If damaged,
do not use, return to place of purchase
• The compressor should be set up near to the user.
• Avoid long air lines and long supply lines (extensions).
• Make sure the intake air is dry and dust-free.
• Do not set up the compressor in damp or wet rooms. The
compressor is designed to be used in dry rooms. It is prohibited
to use the compressor in areas where work is conducted with
sprayed water.
• Before you use the machine, make sure that the mains voltage
complies with the specifications on the rating plate.
• The compressor may only be used in suitable areas (with good
ventilation and an ambient temperature from 5°C to 40°C).
There must be no dust, acids, vapours, explosive or flammable
gases in the room.
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
Attaching The Support Foot
1. Place the supporting foot
and then a small washer
onto the small bolt. Thread
this through the hole in the
foot bracket.
2. Thread the other small
washer and then the spring
washer onto the bolt. Secure
the assembly with the small
nut.
Attaching The Wheels
1. Place the large bolt through
the wheel and a large
washer. Then slide this
through the hole in the
wheel bracket. Place a large
washer then a spring washer
onto the bolt and secure this
with a large nut.
2. Repeat step 1 to fit the
second wheel on the opposite side of the tank.
Fitting The Air Filter
1. Remove the transportation
cover from the air
filter connection with a
screwdriver.
2. Attach the supplied air filter
by screwing it in clockwise.
Connecting The Air Hose to the Compressor
1. Pull back the sleeve on the
regulated pressure outlet of
the compressor and insert
the male Nitto end of the air
hose..
2. Release the sleeve; the Nitto
coupling should click into
place.
3. Check that the fitting is secure by tugging gently on the
connector. If the hose detaches, repeat steps 2 & 3, pushing the
Nitto connector firmly into the outlet.
Disconnecting Air Tools
WARNING! ENSURE YOU HAVE A FIRM GRIP ON THE
AIR HOSE WHEN DISCONNECTING IT FROM THE AIR
COMPRESSOR, AS PRESSURISED AIR IN THE TANK
MAY CAUSE IT TO WHIP AROUND AND INFLICT INJURY
OR DAMAGE.
1. To remove an air tool from
the unit, retract the sleeve
on the female Nitto fitting
and disconnect the air hose
from the air compressor.
2. Repeat the same procedure with the air tool and air hose.
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4
6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAUGE
kg/cm ²
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
46
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRE S SU RE GA UG E
kg/cm²
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | Compressor |
| Model: | ACP-2115K |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito ACP-2115K, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Compressor Ozito
9 Października 2024
26 Września 2024
8 Września 2024
Instrukcje Compressor
- Compressor Livoo
- Compressor Parkside
- Compressor Festool
- Compressor Stanley
- Compressor Boss
- Compressor Scheppach
- Compressor DeWalt
- Compressor Einhell
- Compressor Hyundai
- Compressor Silverline
- Compressor Carel
- Compressor Biltema
- Compressor CMI
- Compressor Osram
- Compressor Trotec
- Compressor Güde
- Compressor Zipper
- Compressor PreSonus
- Compressor Airpress
- Compressor DURO PRO
- Compressor Unimac
- Compressor Westfalia
- Compressor Eventide
- Compressor Aerotec
- Compressor Ferm
- Compressor Nilfisk
- Compressor Hitachi
- Compressor Craftsman
- Compressor PowerPlus
- Compressor Vonroc
- Compressor HiKOKI
- Compressor Porter-Cable
- Compressor Metabo
- Compressor Auto Joe
- Compressor Sun Joe
- Compressor Senco
- Compressor Laica
- Compressor Topcraft
- Compressor Outbac
- Compressor Duro
- Compressor Truper
- Compressor Abac
- Compressor Holzmann
- Compressor POWERNAIL
- Compressor Anova
- Compressor Freeman
- Compressor Airman
- Compressor Numax
- Compressor Full Boar
- Compressor TOOLMATE
- Compressor ExelAir
- Compressor TJM
- Compressor TAURUS Titanium
Najnowsze instrukcje dla Compressor
9 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
5 Października 2024