Instrukcja obsługi Overmax X-bee drone 7.1

Overmax Różnorodny X-bee drone 7.1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Overmax X-bee drone 7.1 (34 stron) w kategorii Różnorodny. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/34
1. SAFETY NOTES
** The product is designed for people aged 14 and up**
The users under 18 years of age can operate the product under adult supervision only. We suggest those,
who are just getting started to operate drones, to contact a person with more experience in this field.
The purpose of the safety notes is to protect both the product and its users as well as bystanders and their
property.
Improper operation of the product can cause injuries and property damage.
SPECIALLY DESIGNED FOR OUTDOOR USE
The product has been designed in a way so that it can be used only outdoors.
Before using the product, make sure that the area you chose is free from obstacles. Also, when operating the
product always keep a safe distance from people and animals.
Do not operate the product near power lines, in public places (crowded areas) and within airport protection
zones.
PREVENT THE PRODUCT FROM GETTING WET
Both the drone and the controller are composed of many precision electronic
components. Therefore, they must be prevented from getting wet.
Exposure to water or
moisture in any form can cause their malfunction or damage.
DO NOT OPERATE OR EXPOSE THE PRODUCT TO RAIN OR MOISTURE
BATTERY INSTRUCTIONS
To avoid a potential fire hazard, please do not short circuit, puncture or reverse the polarity
of batteries.
Battery charging should always be done under adult supervision, and at a location out of the reach of children.
DO NOT MIX NI-CAD AND ALKALINE BATTERIES
SAFETY NOTES FOR NI
-MH BATTERIES
Make sure the batteries are properly installed observing correct polarity (+ -).
DO NOT MIX NI
-CAD AND ALKALINE BATTERIES
If you plan not to use the quadcopter for extended period of time, remove the batteries from the controller to
avoid their leakage, which may damage the transmitter.
PLEASE DISPOSE
USED BATTERIES ACCORDING TO LOCAL REGULATIONS IN SPECIAL RECYCLE
SPOTS.
SAFETY NOTES FOR LI
-POLYMER BATTERIES
Li-Polymer batteries have higher operational risks when compared to ones of other types. Therefore, using
them, it is imperative to follow proper
operational guidelines. The manufacturer and dealers assume no liability
for any damage caused by improper usage.
In order to avoid potential fire or explosion do not use any other charger except the one included with the
product. DO NOT crush, disassembl
e, burn, or reverse the polarity of the batteries.
To avoid short circuits, do not allow the metal parts to touch the battery terminals. NEVER PUNCTURE
BATTERIES, OTHERWISE IT COULD CAUSE POTENTIAL FIRE HAZARD.
Battery charging should always be done under adult supervision, and at a location out of the reach of
children.
In case of unnatural excessive heating of the batteries please stop using or charging them immediately.
Otherwise, it may cause their swelling, deformation or explosion thereby increasing
the risk of fire.
**PLEASE DISPOSE USED BATTERIES ACCORDING TO LOCAL REGULATIONS IN SPECIAL RECYCLE
SPOTS.
DO NOT DISPOSE OF OLD BATTERIES IN THE HOUSEHOLD TRASH
DO NOT CHARGE BATTERIES OVERNIGHT
KEEP AWAY FROM HEAT
R/C models are made from various
forms of plastic that is very susceptible to damage or deformation due to
extremely high and low temperatures. Therefore, the product should not be used or stored in places where it
would be exposed to extreme temperatures.
OBTAIN THE ASSISTANCE OF AN
EXPERIENCED DRONE PILOT
Although the product can be treated as a toy, it is not intended for those under fourteen years of age.
Those,
who are inexperienced in piloting remote
-controlled drones,
must know that there will be a slight learning curve
until yo
u become a skilled pilot. In order to make it easier to gain this skill we recommend exercises under the
supervision of professional drone pilots.
2. CONTROLLER (TRANSMITTER) DIAGRAM
3. CONTROLLER (TRANSMITTER) BATTERY INSTALLATION
Use a screwdriver to open the battery cover.
Place 4 AA batteries in the battery compartment. Make sure the batteries are properly installed according to
correct polarity (+ -). DO NOT MIX THE BATTERIES OF DIFFERENT TYPES
Throttle stick
Right / left migration key
Right / left migration key
Direction control
stick
Back Home button
3D flip button
Lights button
Start / landing button
(press and hold for 3
seconds to stop the engines)
Speed mode button
Photo / video button
Camera navigation button
Power on / off
key
Forward / backward migration
key

Specyfikacje produktu

Marka: Overmax
Kategoria: Różnorodny
Model: X-bee drone 7.1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Overmax X-bee drone 7.1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Różnorodny Overmax

Instrukcje Różnorodny

Najnowsze instrukcje dla Różnorodny

Walkera

Walkera Goggle 3 Instrukcja

15 Października 2024
Walkera

Walkera Goggle 4 Instrukcja

15 Października 2024
Somfy

Somfy Telis Lounge Instrukcja

5 Października 2024
Navman

Navman NavBus Instrukcja

5 Października 2024
Trelock

Trelock LS 320 Instrukcja

5 Października 2024
DJI

DJI Phantom 3 Standard Instrukcja

5 Października 2024
Bobike

Bobike Maxi City Instrukcja

5 Października 2024
Tanita

Tanita 1210N Instrukcja

5 Października 2024
Kerbl

Kerbl 81685 Cat flap Instrukcja

5 Października 2024