Instrukcja obsługi Overloud SpringAge

Overloud Oprogramowanie dźwiękowe SpringAge

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Overloud SpringAge (11 stron) w kategorii Oprogramowanie dźwiękowe. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
OVERLOUD S APRING GE
U MSER ANUAL
UPDATES
Overloud is continuously evolving and improving its products. We advise you to always check for
possible updates before installing, and to do the same after installation from time to time.
Check for latest versions here:
www.overloud.com
1. INTRODUCTION
Thank you for purchasing SpringAge, the most complete and exible high quality simulation of a
spring reverb. SpringAge combines the sound delity of a convolution-based reverb, with the
exibility and low CPU usage of an algorithmic reverb.
SpringAge features three di erent spring models, modeled on the most acclaimed and standard
spring tones:
AQTX
Models one of the springs mostly used into guitar ampli ers. Its tone characteristics are perfect for guitar tracks but are also
great on other stringed instruments as well as on vocals
ANGEL
The tone of this spring really rocks! It is great for any high gain, compressed or harmonically rich tone. It is inspired by the tone
of famous German ampli ers.
S201
Is a more general purpose spring, great on any kind of tracks and especially on keyboards, synths, vocals and lead instruments...
at least, this was the way the original spring that SpringAge is modeling was used.
SpringAge is able to reproduce the tone of the original spring with the same decay, dynamic and
and transient response but, at the same time, it can modify the tone with great exibility. When all
the knobs are in their default position, SpringAge reproduces the response of the original spring
with great delity, as if it were a convolution reverb.
Then, by using the controls on the user interface, you can decide how much of each tone
characteristics you want to add or remove.
SpringAge User Manual
OVERLOUD®
2
All speci cations are subject to change without notice
Made in Italy • www.overloud.com
2. SCHEMATIC
The schematic above depicts SpringAge's signal chain.
The Input signal is split in two: the Dry portion, which is the Input sound without any change
whatsoever, and the Wet portion, which will carry the Input sound processed by the Spring module,
followed by the EQ. At the far right, at the end of the processing, the Output section (the '+' in the
scheme) will mix the Dry and the Wet channels in order to perfectly set the sound levels.
If we look at the lower part of the diagram and follow the signal chain we'll encounter these
modules:
DRIVE
As in real spring reverberation units, the spring is driven by an ampli er which, in vintage designs, is typically a tube ampli er.  
The Drive knob controls the ampli cation of this tube stage. By turning it clockwise the reverb tone becomes progressively
more compressed and rich with harmonics.
SPRING
This is the core of SpringAge; it provides the main processing for the entire unit. You can choose between three di erent spring
models whose response can be modi ed by a set of many parameters. For an in-depth description of the concepts behind
reverberation and the functionality of the parameters, please head to the next chapter.
EQ
This EQ Unit is a two-band fully parametric equalizer. Each band is allowed to span the entire audio spectrum and can be
operated with the usual set of three parameters: Gain (dB), Frequency (Hz) and Q factor (%). While the rst and the second
parameters will set the amount and frequency of the process, the Q factor is a little more complex; in a common situation it
will set the width of the EQ's bell-shaped curve, but at the lower extreme settings it will turn the EQ into a second order Shelf
EQ (low for band 1 or high for band 2).
OVERLOUD®
All speci cations are subject to change without notice
Made in Italy • www.overloud.com
3

Specyfikacje produktu

Marka: Overloud
Kategoria: Oprogramowanie dźwiękowe
Model: SpringAge

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Overloud SpringAge, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Oprogramowanie dźwiękowe Overloud

Overloud

Overloud REmatrix Instrukcja

2 Października 2024
Overloud

Overloud Mark Studio 2 Instrukcja

2 Października 2024
Overloud

Overloud TH-U Instrukcja

2 Października 2024
Overloud

Overloud Breverb 2 Instrukcja

2 Października 2024
Overloud

Overloud SpringAge Instrukcja

2 Października 2024

Instrukcje Oprogramowanie dźwiękowe

Najnowsze instrukcje dla Oprogramowanie dźwiękowe

TAL Software

TAL Software TAL-Sampler Instrukcja

8 Października 2024
TAL Software

TAL Software TAL-Mod Instrukcja

8 Października 2024
Nugen Audio

Nugen Audio Halo Downmix Instrukcja

8 Października 2024
Air

Air Stage EP Instrukcja

8 Października 2024
Air

Air DrumSynth Instrukcja

8 Października 2024
Air

Air Mini D Instrukcja

8 Października 2024
Air

Air Studio Strings Instrukcja

8 Października 2024
Antares

Antares Choir Instrukcja

8 Października 2024
Antares

Antares Auto-Tune Hybrid Instrukcja

8 Października 2024
Antares

Antares Mic Mod Instrukcja

8 Października 2024