Instrukcja obsługi Outbound 076-5560-6 Twin Luchtbed
Outbound
Poduszki powietrzne
076-5560-6 Twin Luchtbed
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Outbound 076-5560-6 Twin Luchtbed (6 stron) w kategorii Poduszki powietrzne. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
P-S-003981
GUIDE D’UTILISATION
INSTRUCTION MANUAL
076-5560-6
TWIN AIRBED / MATELAS PNEUMATIQUE À UNE PLACE
076-5561-4
DOUBLE AIRBED / MATELAS PNEUMATIQUE À DEUX PLACES
076-5562-2
QUEEN AIRBED / GRAND MATELAS PNEUMATIQUE À DEUX PLACES
TM
MC
INSTRUCTIONS TO INFLATE
AIRBED
PREPARATION:
Please read instructions carefully before using this airbed.
INFLATION:
DEFLATION:
1. First ensure the screw valve is fully secured on
the inlet at the end of the mattress (FIG. 1).
2. Locate the built-in manual pump and remove
the plastic screw cap and white rubber plug
from the suction port. You can use either your
hands using a "CPR method" (FIG. 2a) or your
foot (FIG. 2b) to inflate the mattress.
3. Depress the pump area to inflate the bed. Be
sure to depress the pump straight down. You
should completely cover the suction port while
depressing the pump, this will keep the air
from escaping the inflation chamber back
through the suction port.
4. Lift your hand/foot completely off of the hole in
order to have the suction port refill the
chamber. Continue until the bed reaches a
firm but not over-inflated pressure.
5. Insert the white rubber plug back into the
suction port and screw on the plastic cover.
The airbed is ready for use.
• Open the inner cover of the screw valve to
deflate (FIG. 4).
Using air pump (sold separately)
Using the built-in manual pump:
Approximate inflation time using
built-in pump is 5 to 7 minutes.
Unroll the bed onto a flat area free from objects and debris.
The flocked side should be facing up and the smooth PVC side should be on
the ground. Close the screw valve located on the side of bed near the warning.
2
P-S-003981
NOTE:
FIG. 1
FIG. 2a FIG. 2b
FIG. 3
FIG. 4
•
Open the top cover of the screw valve at the end
of the mattress; inflate the bed with an air pump
and close the valve once inflated (FIG. 3).
Note: Air pump is not included.
After use airbed may require additional air
to increase firmness, add air according to
your desired firmness.
1. If the airbed is dirty, use a clean, damp cloth and gently wipe down the surface. Be sure to dry the
airbed before storing.
Note: Do not use harsh detergents as they may damage the airbed.
2. Once deflated, carefully fold the airbed and store in a cool, dry location away from chemicals and
heavy or sharp objects.
If the airbed surface is damaged, use the provided repair patch.
To repair: 1. Completely deflate the airbed.
2. Clean and dry the damaged area.
3. Apply a repair patch and smooth out any air bubbles.
Note:
Never use other types of liquid glue or adhesive fabric, only use a repair patch like the provided one.
CLEANING AND STORAGE:
REPAIRING:
WARNING!
RISK OF SUFFOCATION.
• NOT INTENDED FOR INFANTS UNDER THE AGE OF 4 YEARS OLD.
• INFANTS HAVE SUFFOCATED ON INFLATABLE MATTRESSES.
• INFANTS CAN SUFFOCATE IN SOFT BEDDING MATERIALS, SUCH AS PILLOWS OR
COMFORTERS.
• ALWAYS KEEP MATTRESS FULLY INFLATED WHEN IN USE.
• INFANTS CAN BECOME TRAPPED BETWEEN OBJECTS SUCH AS THE SLEEPING SURFACE,
THE BODY OF THE PARENT OR CAREGIVER, THE WALL AND OTHER OBJECTS.
• INFANTS SLEEPING ON AN ELEVATED SURFACE CAN FALL AND BE SERIOUSLY INJURED.
• NEVER LEAVE YOUNG CHILDREN UNATTENDED.
• USE ONLY UNDER COMPETENT SUPERVISION.
• KEEP AWAY FROM FIRE AND FLAME.
• DO NOT USE IN WATER.
• DO NOT USE A HIGH-PRESSURE PUMP SUCH AS AN AIR COMPRESSOR.
• DO NOT OVER-INFLATE.
• DO NOT PLACE ON STONES, STICKS OR ANY SHARP OBJECTS THAT MAY PUNCTURE THE
PRODUCT.
• AFTER USE, AIRBEDS MAY REQUIRE ADDITIONAL AIR TO INCREASE FIRMNESS. THIS DOES NOT NECESSARILY
INDICATE A LEAK OR DEFECT. ADD AIR TO DESIRED FIRMNESS.
INSTRUCTIONS TO INFLATE
AIRBED
3
P-S-003981
Heavy-duty repair patch included. DO NOT THROW OUT. Keep in a safe place.
Specyfikacje produktu
| Marka: | Outbound |
| Kategoria: | Poduszki powietrzne |
| Model: | 076-5560-6 Twin Luchtbed |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Outbound 076-5560-6 Twin Luchtbed, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Poduszki powietrzne Outbound
3 Lipca 2024
Instrukcje Poduszki powietrzne
Najnowsze instrukcje dla Poduszki powietrzne
1 Lipca 2024