Instrukcja obsługi Oster Classic BLSTMEG-G00-000

Oster mikser Classic BLSTMEG-G00-000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Oster Classic BLSTMEG-G00-000 (2 stron) w kategorii mikser. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
©2021 Sunbeam Products, Inc. All rights reserved. Distributed by Sunbeam Products, Inc.
Boca Raton, Florida 33431. Printed in Mexico.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of re, electric shock, and/
or injury to persons including the following:
1. Read all instructions before using this product.
2. To protect against electric shock, do not place or immerse cord, plugs, or appliance in water or other liquid.
3. This appliance is not intended for use by children or by persons with reduced physical, sensory, or mental capabilities, or lack
of experience and knowledge. Close supervision is necessary when any appliance is used near children. Children should be
supervised to ensure that they do not play with the appliance. Keep the appliance and its cord out of reach of children.
4. Never leave appliance unattended when in use.
5. Unplug from outlet when not in use, before putting on or taking off parts and before cleaning. Allow to cool before putting on
or taking off parts, and before cleaning. To disconnect, turn any control to OFF, then unplug power cord from outlet. To unplug,
grasp the plug and pull from the outlet. Never pull from the power cord.
6. Avoid contacting moving parts.
7. Flashing light indicates ready to operate (models with stand-by mode). Avoid any contact with blades or moveable parts.
8. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in
any manner. Do not attempt to replace or splice a damaged cord. Return appliance to the manufacturer (see warranty) for
examination, repair or adjustment.
9. For appliances with markings on plug blade: This appliance has important markings on the plug blade. The attachment plug or
entire cordset (if plug is molded onto cord) is not suitable for replacement. If damaged, the appliance shall be replaced.
10. The use of attachments, including canning jars, not recommended or sold by the manufacturer may cause re, electric shock
or injury.
11. Do not use outdoors or for commercial purposes.
12. Do not let cord hang over edge of table or counter, or touch hot surfaces, including the stove.
13. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the
blender. A scraper may be used but must be used only when the blender is not running.
14. Blades are sharp. Handle carefully, especially when removing the blades from the container, emptying the container and
during cleaning.
15. To reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached.
16. Always hold container while operating the appliance. If the container should turn when the motor is turned ON, switch
appliance OFF immediately and tighten the container in the threaded bottom.
17. Always operate blender with cover in place. Always wait until all moving parts have stopped before removing any lid or cover.
18. When blending hot liquids, remove center piece of two-piece cover (if a two-piece cover is provided). Beware of steam. Do not
blend boiling liquids.
19. Do not use appliance for other than intended use. Misuse can cause injuries. Always use appliance on a dry, stable, level
surface. Never ll beyond the MAX ll line.
For containers with no lids or vents (when inserted in the blender), such as personal Blend and Go containers:
20. Do not blend carbonated, hot or boiling liquids and ingredients, as this may create pressure buildup. Only blend non-
carbonated liquids and ingredients that are at room temperature or cooler. If the container is warm to the touch, allow to cool
before opening.
21. Do not use the blender for longer than 1 minute at a time to avoid heat and pressure buildup. Allow to cool for 1 minute
between cycles.
For appliances with food processor or food chopper attachments:
22. Keep hands and utensils away from moving blades or discs while processing or chopping food to reduce the risk of severe
injury to persons or damage to the food processor or chopper. A scraper may be used but must be used only when the food
processor or chopper is not running.
23. To reduce the risk of injury, never place cutting blade or discs on base without rst putting container properly in place.
24. Be certain cover is securely locked in place before operating appliance.
25. For food processors: Never feed food by hand. Always use food pusher.
26. Do not attempt to defeat the cover interlock mechanism.
SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY
Scan for operating instructions, and warranty details.
Sunbeam’s limitation of liability: Sunbeam Products, Inc. (“Sunbeam”) shall not be liable for any incidental or consequential damages
caused by the breach of any express, implied or statutory warranty or condition. Except to the extent prohibited by applicable law, any
implied warranty or condition of merchantability or tness for a particular purpose is limited in duration to the warranty set forth at www.
oster.com/instruction-manuals.html. Sunbeam disclaims all other warranties, conditions or representations, express, implied, statutory
or otherwise. Sunbeam shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use
the product including incidental, special, consequential or similar damages or loss of prots, or for any breach of contract, fundamental
or otherwise, or for any claim brought against purchaser by any other party. Some provinces, states or jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above
limitations or exclusion may not apply to you. This limited warranty gives you specic legal rights, and you may also have other rights that
vary from province to province, state to state or jurisdiction to jurisdiction.
P.N. 2162987
How to scan QR Code:
1. Open your camera app or QR Code scanning app.
2. Position your phone so the QR Code appears in the viewnder.
3. Link will appear at the top.
Or you can visit: www.oster.com/instruction-manuals.html
(Your model number can be found on the bottom of your blender.)
CLEANING AND USER MAINTENANCE: Cleaning before rst use is recommended.
CAUTION: Unplug before cleaning. Do Not Immerse the blender base in water or any other liquid.
Use a damp, soft sponge with mild detergent to clean the outside of the blender base. All parts except for the blender
base are dishwasher-safe. You can also wash the parts in warm, soapy water. Rinse well and dry.
Note: This appliance has no user serviceable parts. Any servicing beyond that described in the Cleaning Section
should be performed by an Authorized Service Representative only. See warranty available online.
USING YOUR BLENDER:
1. Turn jar upside down so the small opening is at the top. Then place sealing ring over jar opening.
( )FIGURE 1
2. Place blade into jar. (FIGURE 2)
3. Place threaded jar nut or threaded jar skirt over blade and jar (Note: If there are slots on top of collar, line them up
with notches on jar.) Place the threaded jar nut or threaded jar skirt on jar and turn it clockwise to tighten.
4. Place jar assembly onto base.
5. Line up tabs of jar with tabs on blender base. Make sure the tab of the jar on the left side is in the back of the tab
of the blender base and the tab of the jar on the right side is in front of the tab of the blender base. Make sure jar
is seated into position. (FIGURE 3)
6. Place ingredients into jar and place lid with feeder cap on jar.
7. Plug the power cord into an electrical outlet.
8. Push desired speed and blend ingredients to desired consistency.
9. Press OFF to stop the blender.
NOTE: To use PULSE, push PULSE and hold down for desired length of time. Release PULSE and allow blade to
stop. Repeat cycle as desired.
CAUTION: ALWAYS PLACE HAND ON CONTAINER COVER WHILE OPERATING BLENDER.
For further details please visit www.oster.com/instruction-manuals.html
For product questions contact customer service 1.800.334.0759
For more information on operating instructions, recipes and warranty details, visit:
www.oster.com/instruction-manuals.html FOR USE WITH OSTER® BLENDERS
FIGURE 1
FIGURE 2
FIGURE 3
PLUG INSTRUCTIONS
a. North American models with polarized plugs:
POLARIZED PLUG
This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
electric shock, this plug is intended to t into a
polarized outlet only one way. If the plug does
not t fully into the outlet, reverse the plug. If it still does not t, contact
a qualied electrician. Do not attempt to modify the plug in any way. If
the plug ts loosely into the AC outlet or if the AC outlet feels warm do
not use that outlet.
b. North American models with grounded plugs:
GROUNDED PLUG
To reduce the risk of electric shock, this
appliance has a grounding type cord and plug
that has a third grounding pin (3-prong plug).
The plug must be plugged into an outlet that
is properly installed and grounded in accordance with all local codes
and ordinances. If the plug does not t into the outlet or if in doubt as to
whether the outlet is properly grounded, contact a qualied electrician to
install the proper outlet. Do not alter the plug in any way.
Contacto a tierra


Specyfikacje produktu

Marka: Oster
Kategoria: mikser
Model: Classic BLSTMEG-G00-000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Oster Classic BLSTMEG-G00-000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje mikser Oster

Instrukcje mikser

Najnowsze instrukcje dla mikser

Wilfa

Wilfa 2Go XL TG1B-900 Instrukcja

15 Października 2024
Bosch

Bosch ErgoMixx MSM6S90B Instrukcja

14 Października 2024
Bamix

Bamix Mono Instrukcja

11 Października 2024
Scarlett

Scarlett SC-HB42F80 Instrukcja

11 Października 2024
Kenwood

Kenwood CL639 Instrukcja

10 Października 2024
Orbegozo

Orbegozo LI 5060 Instrukcja

10 Października 2024
Orbegozo

Orbegozo BV 9800 Instrukcja

9 Października 2024