Instrukcja obsługi Oster BRLY07-R00

Oster mikser BRLY07-R00

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Oster BRLY07-R00 (62 stron) w kategorii mikser. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/62
Instruction Manual
BLENDER WITH REVERSIBLE MOTOR TECHNOLOGY
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
Manuel d’Instructions
MÉLANGEUR À MOTEUR RÉVERSIBLE
LIRE TOUTES LES INSTRUCTIONS AVANT D’UTILISER CET APPAREIL
Manual de Instrucciones
BATIDORA CON TECNOLOGIA DE MOTOR REVERSIBLE
LEA TODAS LAS INSTRUCCIONES ANTES DE USAR ESTE APARATO
Manual de Instruções
LIQUIDIFICADORA COM TECNOLOGIA DE MOTOR REVERSÍVEL
LEIA TODAS AS INSTRUÇÕES ANTES DE USAR ESTE APARELHO
MODEL
MODÈLE
MODELO
MODELO
MODEL
MODÈLE
MODELO
MODELO
AL L-M ET AL DRI VE
3
1
AL L-M ET AL DRI VE
3
1
BRLY07-Z00 &
BRLY07-R00
E n g l i s h - 1
When using electrical appliances, basic safety precautions should be followed, including the
following:
READ ALL INSTRUCTIONS BEFORE USING YOUR OSTER
® BLENDER WITH
REVERSIBLE MOTOR TECHNOLOGY.
1. Unplug cord from outlet when not in use or before cleaning.
2. To protect against risk of electrical shock, do not immerse the cord, plug or motor base in
water or other liquids.
3. DO NOT let cord hang over edge of table or counter or touch hot surfaces.
4. Never leave appliance unattended when in use.
5. Children should be supervised to ensure that they do not play with the appliance.
6. The blinking on light indicates the blender is ready to operate. Always avoid any contact
with blades or moveable parts. Keep hands and utensils out of jar while blending to
prevent personal injury or damage to the blender. A rubber spatula may be used only
when the blender is not running.
7. The blade is sharp. Handle with care. Care shall be taken when handling the sharp
cutting blades, emptying the bowl and during cleaning.
8. Always put the lid on the jar before operating the blender.
9. DO NOT operate any appliance with a damaged cord or plug or after the appliance
malfunctions or is dropped or damaged in any manner. Return the appliance to the
nearest Authorised Appliance Service Centre for examination, repair or electrical or
mechanical adjustment.
10. DO NOT use outdoors or for commercial purposes; this appliance is for household use only.
11. Use this appliance for its intended use as described in this manual.
12. Hot Foods: Open feeder cap to vent steam. Make sure to tilt feeder cap away from you
when opening it. Keep hands away from the lid opening to prevent possible burns. When
working with hot liquids, remove feeder cap and start blending at a low speed then move
to a faster speed.
13. To reduce the risk of injury, never place cutter-assembly blades on base without jar
properly attached.
14. Always operate on a flat surface.
15. Always press OFF button and disconnect the blender from the supply mains if it is left
unattended and before assembling, disassembling or cleaning.
16. The use of attachments, not made by manufacturer, including canning or ordinary jar
and processing assembly parts, is not recommended by Sunbeam Products, Inc., doing
business as Jarden Consumer Solutions, and may cause risk of injury to persons.
17. DO NOT operate blender continuously for more than 3 minutes.
18. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY.
The maximum rating marked on the product is based on the attachment that draws the
greatest load. Other attachments may draw less power.
POWER CORD INSTRuCTIONS
Please follow the instructions below to ensure the safe use of the power cord
• DO NOT use an extension cord with this product.
• DO NOT pull, twist or otherwise abuse the power cord.
• Ifthesupplycordisdamaged,itmustbereplacedbythemanufacturer,itsserviceagentor
similarly qualified persons in order to avoid a hazard.
SaV E THESE I N S T R u CTI O N S
I M P O RTa N T Sa F E G u a R D S
E n g l i s h - 2
FITTING A REPLACEMENT PLUG
FOR U.K. AND IRELAND ONLY
If the plug is not suitable for the socket outlets in your home, it can be removed and
replaced by a plug of the correct type. Please refer to “Installation of a plug” below.
Installation of a plug Applicable to U.K. and Ireland.
WARNING - THIS APPLIANCE MUST BE EARTHED.
NOTE: If the terminals in the plug are not marked or if you are unsure or in doubt about
theinstallationoftheplugpleasecontactaqualiedelectrician.Ifa5A3-pinplugistted,
it must be an ASTA approved plug, conforming to BS1363 standard. Replacement 5A
fuses must be BSI or ASTA BS1362 approved.
The wires in the mains lead are coloured as such:
GREEN AND YELLOW - EARTH
BROWN - LIVE
BLUE - NEUTRAL
Please note that the colour of these mains wires may not correspond with the colour
markings that identify the terminals in your plug.
Please proceed as follows:
The wire which is coloured must be connected to the terminal GREEN AND YELLOW
which is marked with the letter “E” or by the earth symbol or coloured or GREEN
GREEN AND YELLOW.
The BROWN coloured wire must be connected to the terminal, which is marked with the
letter “L” or is coloured .RED
The BLUE coloured wire must be connected to the terminal, which is marked with the
letter “N” or is coloured .BLACK
5 amp


Specyfikacje produktu

Marka: Oster
Kategoria: mikser
Model: BRLY07-R00

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Oster BRLY07-R00, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje mikser Oster

Instrukcje mikser

Najnowsze instrukcje dla mikser

Wilfa

Wilfa 2Go XL TG1B-900 Instrukcja

15 Października 2024
Bosch

Bosch ErgoMixx MSM6S90B Instrukcja

14 Października 2024
Bamix

Bamix Mono Instrukcja

11 Października 2024
Scarlett

Scarlett SC-HB42F80 Instrukcja

11 Października 2024
Kenwood

Kenwood CL639 Instrukcja

10 Października 2024
Orbegozo

Orbegozo LI 5060 Instrukcja

10 Października 2024
Orbegozo

Orbegozo BV 9800 Instrukcja

9 Października 2024