Instrukcja obsługi OSD Audio WSK-100
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla OSD Audio WSK-100 (2 stron) w kategorii Receiver. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
F C C C O M P L I A N C E W A R R A N T Y
FCC Information:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you stop
using your product. Changes or modifications not expressly by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warranty Information:
All OSD AUDIO electronics have (2) year Limited Warranty against defects in ma-
terials and workmanship. Proof of purchase must accompany all claims. During
the warranty period OSD AUDIO will replace any defective part and correct any
defect in workmanship without charge for either parts or labor
OSD AUDIO may replace returned electronics with a product of equal value and
performance. In such cases, some modications to the mounting may be
necessary and are not OSD AUDIO’s responsibility.
For this warranty to apply, the unit must be installed and used according to its
written instructions. If necessary, repairs must be performed by OSD AUDIO.
The unit must be returned to OSD AUDIO at the owner’s expense and with prior
written permission. Accidental damage and shipping damage are not considered
defects, nor is damaged resulting from abuse or from servicing performed by an
agency or person not specically authorized in writing by OSD Audio
OSD AUDIO sells products only through authorized dealers and distributors
to ensure that customers obtain proper support and service. Any OSD AUDIO
product purchased from an unauthorized dealer or other source, including retail-
ers, mail order dealers and online sellers will not be honored or serviced under
existing OSD AUDIO warranty policy. Any sale of product by an unauthorized
source or other manner not authorized by OSD AUDIO shall void the warranty on
the applicable product.
Damage to or destruction of components due to application of excessive power
voids the warranty on those parts. In these cases, repairs will be made on the
basis of the retail value of the parts and labor. To return for repairs, you must
email customer service at RMA@OSDAUDIO.com for a Returned Merchandise
Authorization (RMA) number then the unit must be shipped to OSD AUDIO at the
owner’s expense, along with a note explaining the nature of service required. Be
sure to pack the product(s) in a corrugated container with at least 3 inches of
resilient material to protect the unit from damage in transit.
This Warranty Does Not Cover: Damage caused by abuse, accident, misuse,
negligence, or improper operation (installation) • Any products that have been
altered or modied • Any product whose identifying number of decal, serial #,
etc. has been altered, defaced or removed • Normal wear and maintenance. OSD Audio | 775 Columbia Street Brea, CA. 92821 | osdaudio.com
WIRELESS SUBWOOFER KIT
USERS GUIDE
P A C K A G E C O N T E N T S S E T U P
S E T U P
● Transmitter ● Receiver
● RCA Cable ● 9V AC Adapter (2)
● Users Guide
Place the transmitter and receiver within 100 feet of each other, on a
flat surface or mounted on a wall.
-OR-
LED Indicator
1. With the audio source off, connect the transmitter to the
subwoofer jack with the RCA cable.
2. Connect the supplied AC adapter (9V, 200mA) to the transmitter
DC IN 9V jack, and then plug it into a standard household outlet.
3. Connect the receiver to your subwoofer with the RCA cable.
4. Connect the supplied AC adapter (9V, 200 mA) to the receiver DC
IN 9V jack, and then plug it into a standard household outlet.
NOTE:
● Use only the supplied AC adapters. Using adapters not designed
for this product may cause damage.
● If you mount the receiver on a wall, do not block the ventilation
slots.
● Unplug the AC adapters from the AC outlet before disconnecting
from the transmitter or receiver.
Using Your Subwoofer Kit
When connected, the transmitter
and the receiver LED’s light green.
When the audio source is active, the
speakers automatically activate, and
the LED’s light blue.
NOTE:
After powering on, if there is no
signal input within 17 minutes, the
subwoofer kit enters standby mode.
Optimize Your System
many surround systems let you
adjust the delay between the front
and rear speakers. To optimize your
setup, adjust the rear speaker delay
response by about 20 milliseconds.
Changing Channels
If you experience any interference,
press and hold the button on both M
units. The units will automatically
match up.
S P E C I F I C A T I O N S
Features:
● 2.4GHz digital wireless link provides crystal clear audio.
● 34-channel selection.
● Up to 100 feet (30.5m) operation distance between transmitter and
receiver (line of sight).
Specs:
Audio Output Level 2V
Frequency Response 20-200Hz
Audio Distortion <1%
Signal to Noise Ratio >80dB
Specifications are subject to change and improvement without
notice. Actual product may vary from the images found in this
document.
Specyfikacje produktu
Marka: | OSD Audio |
Kategoria: | Receiver |
Model: | WSK-100 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z OSD Audio WSK-100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Receiver OSD Audio
20 Września 2024
19 Września 2024
18 Września 2024
Instrukcje Receiver
- Receiver Sony
- Receiver Yamaha
- Receiver Motorola
- Receiver Logitech
- Receiver Sharp
- Receiver Pioneer
- Receiver SilverCrest
- Receiver Technics
- Receiver JBL
- Receiver Onkyo
- Receiver Edision
- Receiver Roland
- Receiver Bose
- Receiver StarTech.com
- Receiver Behringer
- Receiver Nedis
- Receiver Tangent
- Receiver Boss
- Receiver Marquant
- Receiver Jensen
- Receiver Garmin
- Receiver Blaupunkt
- Receiver ATen
- Receiver Teac
- Receiver Dual
- Receiver Line 6
- Receiver DAP-Audio
- Receiver Manhattan
- Receiver Strong
- Receiver Tripp Lite
- Receiver Shure
- Receiver Denon
- Receiver Mercury
- Receiver Audac
- Receiver Cambridge
- Receiver Kenwood
- Receiver Scosche
- Receiver Alpine
- Receiver Chamberlain
- Receiver Bang & Olufsen
- Receiver JVC
- Receiver Focusrite
- Receiver Rega
- Receiver Hilti
- Receiver TechniSat
- Receiver LD Systems
- Receiver Krüger&Matz
- Receiver Marshall
- Receiver Clarion
- Receiver Thomson
- Receiver Pro-Ject
- Receiver Velleman
- Receiver Ferguson
- Receiver Fusion
- Receiver Magnat
- Receiver Delta Dore
- Receiver Pyle
- Receiver ELAC
- Receiver Panduit
- Receiver Marantz
- Receiver Sennheiser
- Receiver Esoteric
- Receiver Chord
- Receiver Speco Technologies
- Receiver Bowers & Wilkins
- Receiver Samson
- Receiver PreSonus
- Receiver Blackstar
- Receiver Vonyx
- Receiver Bogen
- Receiver Alto
- Receiver Peavey
- Receiver ART
- Receiver NAD
- Receiver RCF
- Receiver Harman Kardon
- Receiver Aiwa
- Receiver JL Audio
- Receiver AKAI
- Receiver ICOM
- Receiver Hartke
- Receiver Telefunken
- Receiver Optoma
- Receiver Proel
- Receiver Hifonics
- Receiver Focal
- Receiver DBX
- Receiver Kicker
- Receiver Amazon
- Receiver Thorens
- Receiver Omnitronic
- Receiver Hama
- Receiver Mackie
- Receiver FiiO
- Receiver Lindell Audio
- Receiver Saramonic
- Receiver Kemo
- Receiver Sangean
- Receiver VOX
- Receiver Hager
- Receiver Arcam
- Receiver Mac Audio
- Receiver Infinity
- Receiver McIntosh
- Receiver Advance Acoustic
- Receiver Denver
- Receiver Dynacord
- Receiver Marshall Electronics
- Receiver Fender
- Receiver Hertz
- Receiver Mooer
- Receiver AKG
- Receiver Atlas Sound
- Receiver Gefen
- Receiver Vivanco
- Receiver Fishman
- Receiver Sencor
- Receiver Ground Zero
- Receiver Power Dynamics
- Receiver Alecto
- Receiver Kathrein
- Receiver Canton
- Receiver JUNG
- Receiver TOA
- Receiver Monacor
- Receiver HQ Power
- Receiver Electro-Voice
- Receiver Anthem
- Receiver Tascam
- Receiver RME
- Receiver AudioControl
- Receiver Audiolab
- Receiver Vocopro
- Receiver SPL
- Receiver Crunch
- Receiver Fenton
- Receiver Artsound
- Receiver Kramer
- Receiver Rotel
- Receiver Amplicom
- Receiver IFi Audio
- Receiver Amiko
- Receiver Caliber
- Receiver Sagem
- Receiver Summit Audio
- Receiver Musway
- Receiver Avalon
- Receiver Steren
- Receiver Galaxy Audio
- Receiver Denson
- Receiver Renegade
- Receiver Pyle Pro
- Receiver Roksan
- Receiver MB Quart
- Receiver Sherwood
- Receiver Konig
- Receiver Conrad
- Receiver RDL
- Receiver Fredenstein
- Receiver QSC
- Receiver Lanzar
- Receiver Humax
- Receiver Golden Age Project
- Receiver Apart
- Receiver Pinnacle
- Receiver Homecast
- Receiver Engel Axil
- Receiver Skytec
- Receiver JETI
- Receiver Linn
- Receiver Yorkville
- Receiver Exposure
- Receiver Axton
- Receiver MIPRO
- Receiver Black Lion Audio
- Receiver Adastra
- Receiver Citronic
- Receiver Formuler
- Receiver Warm Audio
- Receiver HUMANTECHNIK
- Receiver Crest Audio
- Receiver Grace Design
- Receiver Wet Sounds
- Receiver Manley
- Receiver Ebode
- Receiver Crown
- Receiver Morel
- Receiver CE Labs
- Receiver Jolida
- Receiver Viscount
- Receiver Ashdown Engineering
- Receiver Mtx Audio
- Receiver Aquatic AV
- Receiver Parasound
- Receiver Topp Pro
- Receiver Comtek
- Receiver Pyramid
- Receiver LEA
Najnowsze instrukcje dla Receiver
20 Września 2024
20 Września 2024
20 Września 2024
20 Września 2024
20 Września 2024
20 Września 2024
20 Września 2024
20 Września 2024
20 Września 2024
19 Września 2024